Windster UK-611 Installation & Operating Manual

RANGE HOOD (HOOD FANS)

INSTALLATION & OPERATING MANUAl

o

UK-611

PLEASE READ CAREFULLY AND UNDERSTAND THIS MANUAL

BEFORE INSTALLING AND OPERATING THE RANGE HOOD

COOKER HOOD
Dear Client

For fulfilling the best efficiency of the range hood, please read the manual carefully before installatimlOd

operation Please note this appliance must be installed and serviced byalicensed electrician.

GENERAL INDICATION
Before installing and using the hood, please be sure that the voltage(V) and the frequency(Hz) marked

on the feature plate is in accordance with the voltage and frequency in your area. The feature plate

and technical date are shown on the side of the product.

TECHNICAL CHARACTERISTICS

Model NO:UK-611
Single speed motor:77W

Halogen Light Bulb:2x I OW
Voltage: IlO/120V

Frequency:60HZ
Filter:S/S Pyramidal Filter

Control:Push Button

INSTALLATION

PLEASE WEAR "SAFETY GLOVES" BEFORE INSTALLATION, CLEANING,
LIGHT BULB CHANGING AND DISMANTLING.

The hood should be installed as suction machine and connected the plastic columnar outlet piece

supplied with the hood( 150mm diameter) to an exhaust pipe connected directly to the outside.
We recommend you should use the 150mm diameter pipe for better performance and lower noise levels
NOTE:Please never connect the hood to chimneys, ventilation pipes or hot air pipes.

Before connecting any pipes, you need to consult municipal ordinances and request the permission fron

the people in charge of the building. A good and adequate ventilation is important.

WALL MOUNTING

The accessory is needed to install at the side of the hood. The hood must be installed at a minimum

distance of 65CM from the strove top.
Place the installation ho<;>kin the location where the hood is mounted.
Drill holes into the wall by using 8mm drill bit.

The accessory bag includes the installtion hook and screws.

NOTE: If any problems or damages with the Range Hood, please must let a professional and qualified
person to repair the problems. If there were not normal installation or normal use, the manufacturer I importer

I wholesaler will not hold any responsibilities for any damages, personal property, real estate and bodily

injures.

No matter if it is caused directly or indirectly by the Range Hood.

ASSEMBLY OF DECORATIVE EXTENDIBLE DUCT

Duct A and duct B are connected to hood body. Loose Screws C&D, extend duct B to Ft for your height of
telescopic Duct (Fig. I)

B