Windsor Design 94331 Assembly And Operating Instructions Manual

ROUTER TABLE INSERTROUTER TABLE INSERT

ROUTER TABLE INSERT

ROUTER TABLE INSERTROUTER TABLE INSERT

94331

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2006 by Harbor F reight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor F reight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Material

Dimensions 12” x 9” x 23/64 thick

Main Opening 3-7/8” inside demension

Guide Pin 1-3/8” L x 1/4” DIA. (pin) x 3/8” DIA. (shoulder)

Large Pop Out Ring 4-1/16” OD x 2-9/16” ID

Small Pop Out Ring 2-7/8” OD x 1-1/4” ID

Mounting Screws 6MM x 1.00, 15/64” long

Hex Key 3mm

Molded phenolic plastic, steel accessories.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tools, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product! Follow all safety warnings and in­structions provided by the manufacturers of the router being used.

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use in damp or wet locations. Don’t expose
to rain. Keep work area well lighted. Do not use electrically powered tools in the
presence of flammable gases or liquids.

3. Keep children awa y. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

Page 2SKU 94331