Windsor WAV IFOB - 10125090, 10125060, WAV IFE, WAV IFA, WAV IFB User Manual

®

MODEL: Country Voltage
WAV IFA - 10125060 Australia 240V
WAV IFB - 10125070 Britain 230V
WAV IFE - 10125080 Europe 230V

WAV IFOB - 10125090 Britain 230V
Beginning with Serial No. 1000039231

Operating Instructions (ENG)

Instrucciones de manejo (ESP)

Mode d’emploi (FR)

Bedienungsanweisung (GER)

Mode de Emploi (ITA)

AA

86038520 01/10/09
PRV NO. 98781

Read instructions before operating the machine.

Antes de usar la maquina lea atentamente el libro de instrucciones.

Lire attentivement le mode d’emploi avant la mise en service de la machine.

Vor Inbetriebnahme der Maschine Bedienungsanweisung lesen.

Leggere queste istruzioni prima di usare la macchina

.

MACHINE DATA LOG

Name: __________________________________________________________________________________________________

Address: _______________________________________________________________________________________________

Phone Number: _________________________________________________________________________________________

MODEL _______________________________________
DATE OF PURCHASE __________________________
SERIAL NUMBER ______________________________
SALES REPRESENTATIVE # _____________________
DEALER NAME ________________________________
OPERATIONS GUIDE NUMBER ___________________

PUBLISHED

__________________________________________

Copyright 1995 Windsor Industries, Printed in USA

YOUR DEALER

For the name and address of your dealer contact: Windsor Industries

2ENG

WAVIF 86038520 05/15/07

G

Machine Data Log.........................................2

Table of Contents..........................................3

HOW TO USE THIS MANUAL

How to use this Manual.................................1-1

SAFETY

Important Safety Instructions…………...2-1ENG
Hazard Intensity Level…………………..2-2ENG
Grounding Instructions………………….2-3ENG

OPERATIONS

Controls………………………………...…3-1ENG
Machine Operation……………….……...3-2ENG

Set Up…………………………….…….3-2ENG

Operation…………………………….....3-3ENG

Cleaning………………………………...3-3ENG

MAINTENANCE

Belt/Brush Access…………..……..……4-1 ENG
Vac Motor Access & Filters………..…..4-1 ENG
Vac Motor Brush Removal……….….…4-1 ENG
Brush Motor………………………..….…4-1 ENG
Carbon Brush……………………..….…4-1 ENG
Daily Maintenance…………………..….4-2 ENG
Regular/Periodic Maintenance……...…4-2 ENG

Wiring Diagram.............................................4-3

GROUP PARTS LIST

Brush and Drive Group.................................5-1

Brush Height and Wheel Group....................5-3

Vacuum Group..............................................5-5

Handle Group................................................5-7

Lid/Decal Group............................................5-9

Electrical Panel and Cover Group………….5-11
Suggested Spare Parts……………………...5-12

TABLE OF CONTENTS (ENG)

WAVIF 86038520 05/15/07

3EN

HOW TO USE THIS MANUAL

This manual contains the following sections:

- HOW TO USE THIS MANUAL

- SAFETY

- OPERATIONS

- MAINTENANCE

- PARTS LIST

The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.

Parts may be ordered from authorized Windsor
dealers.

When placing an order for parts, the

machine model and machine serial number are
important. Refer to the MACHINE DATA box which
is filled out during the installation of your machine.
The MACHINE DATA box is located on the inside of
the front cover of this manual.

MODEL _____________________________________
DATE OF PURCHASE ________________________
SERIAL NUMBER ____________________________
SALES REPRESENTATIVE # ___________________
DEALER NAME ______________________________
OPERATIONS GUIDE NUMBER __________________

PUBLISHED ________________________________

Copyright 1995 Windsor Industries, Printed in USA

The model and serial number of your machine is on
the bottom back-end of the machine.

1-1ENG

WAVIF 86038520 05/15/07

The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards is identified that could
result in product or personal injury, or severe injury
resulting in death.

The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.

The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:

- Belt/Brush Motor

- Vac Motor and Filters

- Vac Motor Carbon Brushes

- Brush Motor

- Carbon Brush

- Daily Maintenance

- Regular/Periodic Maintenance

The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:

- REF – column refers to the reference
number on the parts illustration.

- PART NO. – column lists the part
number for the part.

- PRV NO. – reference number.

- QTY – column lists the quantity of the

part used in that area of the machine.

- DESCRIPTION – column is a brief
description of the part.

- SERIAL NO. FROM – column indicates
the first machine the part number is
applicable to. When the machine design
has changed, this column will indicate
serial number of applicable machine.
The main illustration shows the most
current design of the machine. The
boxed illustrations show older designs. If
column has an asterisk (*), call
manufacturer for serial number.

- NOTES – column for information not
noted by the other columns.

NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the
front cover is the part number for this manual.