Windsor PJ2AIE, PJ2A User Manual

PILEJOGGER II

MODELS: PJ2A 8.604-176.0

PJ2AIE 8.604-177.0

Operating Instructions (ENG)

8603750 - G 03/04/08
PRV NO. 98018

Read instructions before operating the machine.

MACHINE DATA LOG/OVERVIEW

!

Name: __________________________________________________________________________________________________

Address: _______________________________________________________________________________________________

Phone Number: _________________________________________________________________________________________

MODEL _______________________________________
DATE OF PURCHASE __________________________
SERIAL NUMBER ______________________________
SALES REPRESENTATIVE # _____________________
DEALER NAME ________________________________
OPERATIONS GUIDE NUMBER ___________________

PUBLISHED

__________________________________________

Copyright 1999 Windsor Industries, Printed in USA

YOUR DEALER

For the name and address of your dealer contact: Windsor Industries

OVERVIEW

The PILEJOGGER can be operated with all Windsor® hot water soil extractors. If used with other
machines, the extraction unit pump must produce a minimum of 25 psi. If the Pilejogger is be used
with the Dominator Professional or other machines capable of 200psi, correctly sized stainless
steel jets are required (order optional SS Jet Kit 86025360 -PRV NO.#47058).

WARNING:

Do NOT use with extractors producing over 200 psi.

86037500 PJ2A 03/04/08

2

Machine Data Log/Overview.........................2

Table of Contents..........................................3

HOW TO USE THIS MANUAL

How to use this Manual.................................1-1

SAFETY

Important Safety Instructions........................2-1

Hazard Intensity Level. .................................2-2

Grounding Instructions..................................2-3

OPERATIONS

How the Machine Works...............................3-1

MAINTENANCE

Daily Maintenance. .......................................4-1

Machine Troubleshooting..............................4-1

Wiring Diagram.............................................4-1

GROUP PARTS LIST

Pilejogger Assembly. ....................................5-1

230V Service Parts.......................................5-3

Warranty. .................................................... .5-4

TABLE OF CONTENTS

86037500 PJ2A 03/04/08

3

HOW TO USE THIS MANUAL

This manual contains the following sections:

- HOW TO USE THIS MANUAL

- SAFETY

- OPERATIONS

- MAINTENANCE

- PARTS LIST

The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.

Parts may be ordered from authorized Windsor
dealers.

When placing an order for parts, the

machine model and machine serial number are
important. Refer to the MACHINE DATA box which
is filled out during the installation of your machine.
The MACHINE DATA box is located on the inside of
the front cover of this manual.

MODEL _____________________________________
DATE OF PURCHASE ________________________
SERIAL NUMBER ____________________________
SALES REPRESENTATIVE # ___________________
DEALER NAME ______________________________
OPERATIONS GUIDE NUMBER __________________

PUBLISHED ________________________________

Copyright 1999 Windsor Industries, Printed in USA

The model and serial number of your machine is on
the bottom back-end of the machine.

1-1

86037500 PJ2A 03/04/08

The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards is identified that could
result in product or personal injury, or severe injury
resulting in death.

The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.

The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:

- Daily Maintenance

- Troubleshooting

- Wiring Diagram

The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:

- REF – column refers to the reference
number on the parts illustration.

- PART NO. – column lists the part
number for the part.

- PRV NO. – Reference number

- QTY – column lists the quantity of the

part used in that area of the machine.

- DESCRIPTION – column is a brief
description of the part.

- SERIAL NO. FROM – column indicates
the first machine the part number is
applicable to. When the machine design
has changed, this column will indicate
serial number of applicable machine.
The main illustration shows the most
current design of the machine. The
boxed illustrations show older designs. If
column has an asterisk (*), call
manufacturer for serial number.

- NOTES – column for information not
noted by the other columns.

NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.