MODELS: NWB
86284220
Operating Instructions (ENG)
86037530 –C 05/18/11
PRV NO. 980183
Read instructions before operating the machine.
MACHINE DATA LOG
2
Warranty Registration
Thank you for purchasing a Windsor product. Warranty registration is quick and easy.
Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to:
www.windsorind.com/WarrantyRegistration.aspx
For customer assistance:
1-800-444-7654
86037530 NWB 05/18/11
Machine Data Log................................................2
Table of Contents.................................................3
HOW TO USE THIS MANUAL
How to use this Manual........................................1-1
SAFETY
Important Safety Instructions ...............................2-1
Hazard Intensity Level..........................................2-2
OPERATIONS
Technical Specifications.......................................3-1
Notes....................................................................3-1
Controls/Components. .........................................3-2
Maintenance.........................................................3-2
TABLE OF CONTENTS
PARTS LIST
Spare Parts List....................................................4-1
Warranty...............................................................4-2
86037530 NWB 04/07/08
3
HOW TO USE THIS MANUAL
This manual contains the following sections:
- HOW TO USE THIS MANUAL
- SAFETY
- OPERATIONS
- PARTS LIST
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized Windsor
dealers. When placing an order for parts, the
machine model and machine serial number are
important. Refer to the MACHINE DATA log which is
filled out during the installation of your machine. The
MACHINE DATA log is located on the inside of the
front cover of this manual.
The serial number of your machine is located just
below the handle on the cord side.
The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards is identified that could
result in product or personal injury, or severe injury
resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
- REF – column refers to the reference
number on the parts illustration.
- PART NO. – column lists the part
number for the part.
- PRV NO. - Reference No.
- QTY – column lists the quantity of the
part used in that area of the machine.
- DESCRIPTION – column is a brief
description of the part.
- SERIAL NO. FROM – If this column has
an (*) and a Reference number, see the
SERIAL NUMBERS page in the back of
your manual. If column has two asterisk
(**), call manufacturer for serial number.
The serial number indicates the first
machine the part number is applicable
to. The main illustration shows the most
current design of the machine. When a
boxed illustration is shown, it displays
the older design.
- NOTES – column for information not
noted by the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The n
front cover is the part number for this manual.
.
umber on the lower left corner of the
1-1
86037530 NWB 04/07/08
!
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precaution
must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
WARNING:
To reduce the risk of fire, electric shock, or injury:
Use only indoors. Do not use outdoors or expose to rain.
Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return
it to an authorized service center.
Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.
Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near
flammable fluids, dust or vapors.
This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops
and offices for more than normal housekeeping purposes.
Maintenance and repairs must be done by qualified personnel.
The machine shall only be operated by instructed and authorized persons.
Do not handle the plug or machine with wet hands.
Do not unplug machine by pulling on cord. To unplug, grasp the plug, not
Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the ma chine.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or
corners.
Do not pull/run machine over cord. Keep cord away from heated surfaces.
Connect to a properly grounded outlet. See Grounding Instructions.
Do not allow to be used as a toy. Close attention is necessary when used near children.
Do not leave the appliance when plugged in. Unplug from outlet when not in use or before servicing.
Turn off all controls before unplugging.
the cord.
SAVE THESE INSTRUCTIONS
86037530 NWB 04/07/08
2-1
HAZARD INTENSITY LEVEL
The following symbols are used throughout this guide as indicated in their descriptions:
HAZARD INTENSITY LEVEL
There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR
SAFETY. The level of hazard intensity is determined by the following definitions:
! WARNING
WARNING - Hazards or unsafe practices which COULD re sult in severe personal injury or death.
! CAUTION
CAUTION - Hazards or unsafe practice s which could result in minor personal injury or product or property
damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating
condition. Following is information that signals some potentially dangerous conditions to the operator or the
equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on
the machine. Please take the necessary steps to train the machine operating personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless Trained and Authorized.
Unless Operation Guide is Read and understood.
In Flammable or Explosive areas.
In areas with possible falling objects.
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the
machine. Use Windsor approved replacement parts.
.
2-2
86037530 NWB 04/07/08
THIS PRODUCT IS FOR COMMERCIAL USE
ONLY.
ELECTRICAL:
In the USA this machine operates on a standard 15
amp 115V, 60 hz, A.C. power circuit. The amp,
hertz, and voltage are listed on the data label found
on each machine. Using voltages above or below
those indicated on the data label will cause serious
damage to the motors.
EXTENSION CORDS:
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding
conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like the
plug in “Fig. A”. A temporary adaptor that looks like
the adaptor in “Fig. C” may be used to connect this
plug to a 2-pole receptacle as shown in “Fig. B”, if a
properly grounded outlet is not available. The
temporary adaptor should be used only until a
properly grounded outlet (Fig. A) can be installed by
a qualified electrician. The green colored rigid ear,
lug, or wire extending from the adaptor must be
connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by a metal
screw.
GROUNDING INSTRUCTIONS
Improper connection of the equipmentgrounding conductor can result in a risk of
electric shock. Check with a qualified electrician
or service person if you are in doubt as to
whether the outlet is properly grounded. Do not
modify the plug provided with the appliance - if it
will not fit the outlet, have a proper outlet
installed by a qualified electrician.
86037530 NWB 04/07/08
2-3
TECHNICAL SPECIFICATIONS
ITEM DIMENSION/CAPACITY
Electrical 115Volt, 9.5 Amps, 60Hz
Electric Vacuum Motor Single Two Stage
Dimensions – Weight (with filter and hose assembly) 13 lbs (5.9 kg)
Dimensions – Length (W/O filter and hose assembly) 12 in. (30.5 cm)
Dimensions - Height 11.5 in. (29.2 cm)
Dimensions - Width 8.5 in. (21.6 cm)
Power Cable 9.5 ft. (2.4 m)
NOTES:
3-1
86037530 NWB 04/07/08
4
2
1
CONTROLS/COMPONENTS/MAINTENANCE
5
3
DAILY/REGULAR MAINTENANCE
Before making any adjustments or repairs to the
machine, disconnect the power cord from electrical
source.
Inspect all hoses, electrical cables and connections
on your machine. Frayed or cracked hoses should
be repaired or replaced to eliminate pressure loss.
If the cable insulation is broken or frayed, repair or
replace it immediately. Do not take chances with
electrical fire or shock.
Remove lint, dirt or debris build-up from filter. This
will give your motor added life. Added build-up may
decrease blower performance and/or damage your
motor.
CONTROLS/COMPONENTS
1.
Main Handle. Used to carry and move
machine.
Power Switch. Turns on blower motor.
2.
Blower Port. Directs flow into Hose
3.
assembly.
Filter. Keeps debris from the motor,
4.
facilitates easy cleaning.
Shoulder Strap.
5.
86037530 NWB 04/07/08
3-2
SPARE PARTS LIST
REF PART NO. PRV NO. QTY DESCRIPTION
1 86161330 34423 1 FILTER, NWB
2 86161350 730287 1 STRAP ASM, NWB COMPLETE
3 86161340 39701 1 HOSE ASM, NWB COMPLETE
4 86244120 500848 1 LABEL, NORTHWIND NOT SHOWN
1
2
SERIAL NO.
FROM
3
NOTES:
4-1
86037530 NWB 04/07/08
Loading...