Windsor AXCESS 12, 1.012-061.0, AXCESS 15, 1.012-062.0 Operating Instructions Manual
86404610-B 01/29/16
AXCESS
Vacuum
Operating instructions (ENG)
MODELS: AXCESS 12
1.012-061.0
AXCESS 15
1.012-062.0
From Serial No. # C170007627 For Axcess 12
# C171005531 For Axcess 15
If Serial Number not listed, Contact Manufacturer
2
Warranty Registration
Thank you for purchasing a Kärcher North America product. Warranty registration is quick
and easy. Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to :
http://warranty.karcherna.com/
For customer assistance:
1-800-444-7654
86404610 Axcess
Machine Data Label
3
Table of Contents
Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3
How To Use This Manual . . . . . . . . . . . . . . . . . . . 4
Safety
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 5
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . 6
GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . 7
Operations
Technical Specifications . . . . . . . . . . . . . . . . . . . . 8
Components/Controls . . . . . . . . . . . . . . . . . . . . . . 9
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Machine Operation . . . . . . . . . . . . . . . . . . . . . . . 10
Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Maintenance
Brush Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing Blockages . . . . . . . . . . . . . . . . . . . . . 14
Parts
Power Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Optional Attachments . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12” Power Head . . . . . . . . . . . . . . . . . . . . . . . . . 20
15” Power Head . . . . . . . . . . . . . . . . . . . . . . . . . 22
86404610 Axcess
4
How To Use This Manual
This manual contains the following sections:
• How to Use This Manual
•Safety
• Operations
• Maintenance
•Parts List
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA
box is located on the inside of the front cover of this
manual.
The model and serial number of your machine is
located on the back of the machine.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its components in good working condition. They are listed in
this general order:
• Filters
• Blockages
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
• ITEM – column refers to the reference num-
ber on the parts illustration.
• PART NO. – column lists the part number for
the part.
• REF NO. – reference number.
• DESCRIPTION – column is a brief descrip-
tion of the part.
• NOTES – column for information not noted by
the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
86404610 Axcess
5
Safety
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precaution must always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
To reduce the risk of fire, electric shock, or injury:
Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
Do not use outdoors or on wet surfaces.
Do not use near small children. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
Use only as described in this manual. Use only manufacturer's recommended attachments.
Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center.
Do not pull or carry by the cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or
corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts. Do not place
fingers or other body parts under vacuum unless unplugged.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Do not use without dust bag and/or filters in place. Do not wash filters.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may have
been present.
Machines can cause fire when operated near flammable vapors or materials. Do not operate this machine near
flammable fluids, dust or vapors.
Maintenance and repairs must be done by qualified personnel.
Use only identical replacement parts. See instructions for servicing of appliances.
Do not use machine as a step.
If used on plush carpet or carpet with thick padding, do not leave machine in one place with machine turned on.
Do not re-use bags. Once full, discard and replace with a new bag.
Always turn off this appliance before connecting or disconnecting motorized nozzle.
Do not touch the brush roller while the machine is plugged in. Brush may unexpectedly restart. To reduce the
risk of injury from moving parts, unplug before servicing.
The vacuum has an electronic overload protection. The power head could shut itself off if used on certain
carpets. If that should occur, turn off the machine, unplug it and look for a blockage. If there is no blockage,
reduce the load on the brush roller by adjusting the brush height to a higher level (up to 4)
Store the vacuum in a dry place at room temperature. When the vacuum is not in use, you should wrap the cord
on the cable hooks.
Any other servicing should be performed by an authorized service representative.
READ AND SAVE THESE INSTRUCTIONS
86404610 Axcess
6
Safety
Important Safeguards
Accidents due to misuse can only be prevented by those using the machine. To guard against injury, basic
safety precautions should be observed,
including the following:
Read and follow all safety instructions.
The vacuum cleaner is designed to be safe when used to perform cleaning functions. Should damage occur to
electrical or mechanical parts, cleaner should be repaired by a competent service center before using in order to
avoid further damage to machine or physical injury to user.
A damaged power cord could cause electrical shock and/or fire. To minimize this possibility observe the
following precautions:
• Do not run cleaner over power cord.
• Avoid closing doors on power cord pulling it around sharp edges, or placing sharp-edged objects upon it.
• Wind cord no tighter than is necessary to retain it on the cord hooks.
• When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can
damage cord insulation and internal connections to plug.
Your vacuum cleaner creates suction and contains a revolving brush. To avoid bodily injury from suction or
moving parts, vacuum cleaner brush should not be placed against, or in close proximity of loose clothing,
jewelry, hair or body surfaces while cleaner is connected to electrical outlet. Cleaner should not be used to
vacuum clothing while it is being worn. Keep children away from machine when in operation or plugged in.
If used on plus carpet or carpet with thick padding, turn off unit when handle is in upright position. When using
accessory tools, keep floor bush off carpet by keeping handle in locked position and lowering handle with on
hand to raise bush off floor. Operate accessories with other hand.
Always plug your cleaner into a standard wall outlet. Use of extension cord or light socket with inadequate
current-carry capacity could result in electric shock or fire hazard.
Disconnect cleaner from electrical outlet before servicing, such as changing bags or belts. You could receive
bodily injury from moving parts of machine should switch accidentally turned on. Disconnect cleaner from electrical outlet before detaching powerhead.
Do not use your vacuum cleaner in areas where flammable and/or explosive vapor or dust is present to avoid
possibility of fire or explosion. Some cleaning fluids can produce such vapors. Areas on which cleaning fluids
have been used should be completely dry and thoroughly aired before being vacuumed.
To avoid fire hazard, do not pick up matches, fireplace ashes, or smoking material with cleaner.
Keep your work area well lighted to avoid picking up harmful materials (such as liquids, sharp objects, or burning
substances) and avoid tripping accidents.
Use care when operating the cleaner on irregular surfaces such as stairs, as falling cleaner could cause bodily
injury and/or mechanical damage. Proper storage of machine in an out-of-way area immediately after use will
also prevent accidents caused by tripping over cleaner.
Store your vacuum indoors in a cool, dry area not exposed to the weather to avoid electrical shock and/or
cleaner damage.
Exercise strict supervision to prevent injury when using vacuum cleaner near children or when child is allowed
to operate vacuum cleaner. Do not allow children to play with vacuum cleaner and never leave cleaner plugged
in and unattended.
SAVE THESE INSTRUCTIONS
86404610 Axcess
WARNING: ELECTRICSHOCK COULD OCCUR IF USED
OUTDOORS OR ON WET SURFACES
7
Safety
GROUNDING INSTRUCTIONS
This appliance must be grounded, if it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having
an equipment–grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance if it will not fit the outlet; have a proper outlet installed by a qualified
electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illustrated in sketch A. A temporary adaptor looks like adaptor illustrated in sketches B and C, may be used it
connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet (sketch A) can be installed by a qualified
electrician.
The green colored rigid ear, lug or the like extending from the adaptor must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by
a metal screw.
NOTE: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
86404610 Axcess
GROUNDING
PIN
GROUNDED
OUTLET
ADAPTER
METAL SCREW
TAB FOR
GROUNDING SCREW
GROUNDED
OUTLET BOX
(A) (B)
(C)
8
Operations
Technical Specifications
Vacuum Portion: (Carry unit)
Power Head: (Detachable Head unit)
ITEM DIMENSION/CAPACITY
Vacuum Motor High Performance, single stage
Vacuum Motor Rated Power 1000 Watts
Vacuum Motor Maximum Power 1200 Watts
Suction 225 Mbar (2300 mm WS)
Waterlift 92 in (234 cm)
Air Flow 102 cfm (48 l/s)
Filter Bag Capacity 3.5 liters, 3 layer, enclosed, top-loading
Weight
-Axcess 12
-Axcess 15
17 lbs (7.7 kg)
17.4 lbs (7.9 kg)
Dimensions - Height 48 in (123 cm)
Housing Injection molded, high impact ABS and PP plastic
Cable 40 in (12 M) 18/3 SJT
ITEM DIMENSION/CAPACITY
Brush Motor Rated Power
- 12 in (30 cm) 175 Watt
- 15 in (38 cm) 200 Watt
Working Width of Powerhead
-Axcess 12
-Axcess 15
12 in (30 cm)
15 in (38 cm)
Brush Drive Non-slip Tooth Belt, enclosed, electronic safety clutch and speed control.
Brush Speed 2700 rpm (5400 brush contacts per minute)
Wheels 2 in (5.2 cm) dia. rubberized
86404610 Axcess
9
Operations
Components/Controls
86404610 Axcess
1. Handle
2. Tube
3. Dust Bag Housing
4. Filter Cover
5. Cable Hook
6. Hose
7. Hose Handle
8. Carrying Handle
9. Exhaust Filter
10. Filter Retaining Rings
11. Nec k
12. Foot Pedal
13. Power Head (12" - 15")
A. On/Off Switch
B. Power Cord
C. Cable Hook
10
Operations
Assembly
Please read all instructions before using this
machine.
1. Carefully attach the brush nozzle to the vacuum
cleaner through the fitting at the bottom of the
vacuum until it locks. [See below]
2. Push the black end of the hose [A] into the
connection on the filter cover [B].
3. Insert the hose handle [C] into the suction
opening on the side and press the hose into its
place on the side of the machine, as shown.
Machine Operation
Your vacuum is operated with an electric power
brush. The machine can be used in the upright
position.
When locking the vacuum in the upright position,
please ensure the bag housing is clicked in place;
face forward to the center, or the unit could overturn.
Please ensure that the On/Off switch is in the OFF
position. Turn the cable hook to release the power
cable and plug into the walls main outlet.
Now you may start your machine by moving the
power switch to the ON position.
To use the power head (12” or 15” model):
1. Press the foot pedal [D] on the rear of the power
head and lower the machine handle to an angled
position. The brush motor will then turn on.
When using the hose and attachments, keep the
machine in upright position.
The hose handle can be removed from he side of the
vacuum and can be used with or without attachments.
Also maintain a grasp on the machine when using the
hose as it could tip if the hose is pulled too far.
The machine can also be used without the power
head. You can easily carry the machine by using the
carrying handle.
When you have finished using the machine, turn it off
by moving the power switch to the OFF position. Then
unplug the power cable and wind it into the cable
hook and handle.
86404610 Axcess
11
Operations
Important instructions for use on the power head.
The brush roller is off and stopped when the machine
is in the upright position and the handle is completely
locked in place.
NOTE: If you have the machine handle at an angle,
the brush roller will spin.
Leaving the machine in a stationary position for an
extended period of time while the brush roller is
spinning may cause damage to your carpet.
Recommended items to be aware of with regard to
your vacuum:
• Be sure NOT to allow carpet edges or fringe
into the brush.
• This machine could cause damage to loosely
woven carpets or rugs, wool loop carpets,
long piled carpets, or very soft and sensitive
floor coverings.
• We do NOT recommend using the power
head to clean old or especially valuable handcrafted carpets.
• If you have uneven flooring, the metal part
underneath the machine may scratch the
surfaces.
• Please carry the machine over high thresholds.
Power Head
The rotating design of the swivel neck allows the
power head to move in any direction, making it easily
maneuverable around obstacles.
The power head also has an adjustable brush height
and to-the-edge brush action for effective all around
cleaning.
Foot Pedal
By pushing the foot pedal and lowering the handle,
you activate the power head and the brush begins
spinning.
Failure to use the Foot Pedal will cause damage to
the unit.
86404610 Axcess
12
Operations
Indicator Lights
The electronic brush control constantly monitors the
status of the brush, communicating the status through
the lights on top.
Green and Red: The brush is not fully engaged in the
carpet. The height adjustment should be lowered. If
the height adjustment is at the lowest setting, the
brush is worn and needs to be replaced.
Green light ONLY: Brush is working well.
NOTE: Recommend selecting a brush height that is
only one level beneath that at which the green and
red lights are on.
Red light ONLY: Brush is blocked. Turn off machine,
unplug and remove blockage. [See maintenance
section]
86404610 Axcess
13
Maintenance
Brush Roller
To remove the brush roller, press the button and turn
the bearing downward.
Turn the brush slightly to the right and pull it out.
We recommend to regularly remove threads and hair,
which have been wound around the brush roller.
Filters
When the orange bag full indicator is showing, airflow
is reduced. This could be because the filter bag is full,
the filters are clogged or there may be a blockage.
Changing The Filter Bag
1. Remove the filter bag by opening the latch on the
side of the bag housing.
2. Close the filter bag with the sealing cap and lift it
out.
The procedure to replace the bag is illustrated on the
front of each bag.
NOTE: You cannot close the bag housing if the bag
is fitted incorrectly.
Changing Filters
Motor Protection Filter
NOTE: This filter can only be accessed by removing
the filter bag.
1. Lift the motor protection filter up by the bracket.
2. Replace with new.
NOTE: Make sure filter fits in position tightly.
3. Put filter bag back in place.
The filter should be changed when it is dirty, at
minimum. No later then replacing 20 filter bags.
Exhaust Filter
NOTE: Recommended to replace every time you
replace the Motor Protection Filter.
1. Carefully remove the filter retaining rings and put
them to the side.
2. Pull the enforcement strips of the filter out of the
housing slot.
3. Remove the filter from the housing.
4. Replace with new in reverse order.
Be sure the filter is fitted correctly in the housing slot
and retaining rings are installed correctly.
NOTE: If the filter is NOT installed correctly it will be
ineffective.
Use ONLY replacement parts procured from the
manufacturer to ensure effectiveness and safety.
DO NOT wash any filters.
86404610 Axcess
14
Maintenance
Removing Blockages
If your bag full indicator light remains lit after you have
changed bags and/or filters this is an indication that there
may be a blockage somewhere in your unit.
It is important to keep all areas of the system free from
blockage, as this may damage your unit or its components.
• Check for suction at the end of hose. If you can only
feel a small amount of suction, there is a block in
your hose.
To remove:
• Check the suction port at the opening for the hose
handle. Remove any debris you may find.
• Check the suction neck of the power head. Remove
any debris you may find.
• Check the trap-door on the bottom of the power
head. Remove any debris you may find.
• Check between the suction neck and trap-door
within the power head, as obstacles may become
lodged in the travel path. Remove any debris you
may find.
Never clean down the hose with a stick or pointed object.
86404610 Axcess
1. Loosen the safety ring on the lid.
2. Remove the hose from the machine.
3. Reverse the airflow through the hose by
putting the hose handle in the connecting
tube of the filter cover.
4. Stretch the hose in the spot where the
blockage may be and open/close the end of
hose until blockage is removed.
Trap Door
Safety Ring
Hose
Hose Handle
Hose Handle
Opening
(Suction Port)
Suction
Neck
Filter Cover
Opening
86404610-B 01/29/16
AXCESS
Vacuum
Instructions sure le fonctionnement (FRE)
MODELS: AXCESS 12
1.012-061.0
AXCESS 15
1.012-062.0
De série n ° # C170007627 For Axcess 12
# C171005531 For Axcess 15
Si le numéro de série ne figure pas, contacter le fabricant
2
Modèle :
Date d’achat :
Numéro de série :
Détaillant :
Adresse :
Numéro de téléphone :
Représentant commercial:
Enregistrement de la garantie
Merci d'avoir acheté un produit Kärcher North America. L'enregistrement de la garantie
est facile et rapide. Votre enregistrement nous permettra de mieux vous servir tout au long
de la durée de vie de votre produit.
Pour enregistrer votre produit, consultez :
http://warranty.karcherna.com/
Pour l'assistance client:
1-800-444-7654
86404610 Axcess
Données de la Machine
3
Table des matières
Données de la Machine. . . . . . . . . . . . . . . . . . . . . 2
Table des matières . . . . . . . . . . . . . . . . . . . . . . . . 3
Comment Utiliser Ce Manuel . . . . . . . . . . . . . . . . 4
Sécurité
INSTRUCTIONS IMPORTANTES SUR LA
SECURITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mesures De Sécurité Importantes . . . . . . . . . . . . 6
Instructions Visant La Mise À La Terre . . . . . . . . . 7
Fonctionnement
Specifications Techniques . . . . . . . . . . . . . . . . . . 8
Composants/commandes . . . . . . . . . . . . . . . . . . . 9
Lumieres Indicatrices . . . . . . . . . . . . . . . . . . . . . 10
Entretien
Rouleau A Balai . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filtres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assemblage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . 12
Enlevement Des Bouchons. . . . . . . . . . . . . . . . . 14
Pièces
Power Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Optional Attachments . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12” Power Head . . . . . . . . . . . . . . . . . . . . . . . . . 20
15” Power Head . . . . . . . . . . . . . . . . . . . . . . . . . 22
86404610 Axcess
Loading...