Windbell M&C WB-SE100 User Manual
WB-SE100 EXPLOSION PROOF
SMART CONSOLE
V2.0 AUGUST 2016
USER MANUAL
Welcome to choose Automatic Tank Gauging (ATG) System of Windbell Company. All our products
are under strict inspection and testing before left factory. And you are strongly recommended to read
this manual before installation.
The installation and maintenance of the products must be done by the qualified technicians.
Please keep this user manual properly so that you can look up and get help in time.
Safety Instruction
The product is installed in mobile fueling site, please read safety instructions for explosion
protection.
No power during installation and maintenance.
The products are prohibited to be installed in explosion proof area over its own Ex-proof grade.
Unpack and Check
Please check all the materials according to the list. If anything missed, please contact the local
representative or distributor directly. You can also find the contact information of Windbell in this
manual.
Warranty Card
After installation, please send the filled Warranty card to Service Department of Windbell by email
sales@windbelltek.com, it is for your benefits and timely service.
Thank you very much!
Copyright Notice
The user manual copyright belongs to Zhengzhou Windbell Electric Co., Ltd.. Without the written
permission, any part of this manual can not be copied, translated, stored in a database or retrieval
system; also can not be spread by electronics, remake, recording or other ways.
In the constant effort to improve our product, we reserve the right to make construction or design
changes without notice or obligation.
INTRODUCTION
Common Icon ------------------------------------------------------------------------------------------------------------ 1
Monitoring Interface (home page) --------------------------------------------------------------------------------- 1
1. Summary -------------------------------------------------------------------------------------------------------------- 2
1.1. Smart Console------------------------------------------------------------------------------------------------- 2
1.2. Features and Technical Parameters ------------------------------------------------------------------------ 3
2. Installation ------------------------------------------------------------------------------------------------------------ 4
2.1. Installation of Smart Console ------------------------------------------------------------------------------ 4
2.2. Electrical Wiring Diagram of ATG System -------------------------------------------------------------- 5
2.3. Connection Between Console and PC Software -------------------------------------------------------- 6
3. Operation -------------------------------------------------------------------------------------------------------------- 7
3.1 Alarm ------------------------------------------------------------------------------------------------------------ 8
3.2 Shift -------------------------------------------------------------------------------------------------------------- 8
3.3 Alarm Report --------------------------------------------------------------------------------------------------- 8
3.4 Shift Report ---------------------------------------------------------------------------------------------------- 8
3.5 Inventory Report ---------------------------------------------------------------------------------------------- 8
3.6 Delivery Reports ---------------------------------------------------------------------------------------------- 9
3.7 Tank Table ------------------------------------------------------------------------------------------------------ 9
3.8 Infrared ---------------------------------------------------------------------------------------------------------- 9
4. Report ----------------------------------------------------------------------------------------------------------------- 11
4.1 Alarm Report -------------------------------------------------------------------------------------------------- 11
4.2 Shift Report --------------------------------------------------------------------------------------------------- 11
4.3 Inventory Report --------------------------------------------------------------------------------------------- 12
4.4 Delivery Report ----------------------------------------------------------------------------------------------- 12
5. Relay ------------------------------------------------------------------------------------------------------------------- 13
6. Common Failures and Solutions -------------------------------------------------------------------------------- 14
7. Warranty and Maintenance-------------------------------------------------------------------------------------- 15
8. Contact Us ------------------------------------------------------------------------------------------------------------ 16
CONTENT
SE100 Explosion-Proof Smart Console User Manual
1
Common Icon
Monitoring Interface(home page)
Alarm Shift Concentration Tank Table System Parameter
Alarm Report Shift Report Inventory Report Delivery Report
SE100 Explosion-Proof Smart Console User Manual
2
1.1. Smart Console
WB-SE100 Ex-proof console is especially designed to use at mobile petrol station or tank area. The
console can be directly installed at tank area, no need other protection instruments. It optimize
intelligent micro-controller technology, and combined with excellent electronic crafts; this console
attracts more attention on its well-formed shape. And it is easy to operation even integrates more
functions.
The console is mainly composed of display screen, core processing CPU, safety barriers and power
module. The display screen is 320 * 240 black and white LCD screen, which is used for real time
information display and related report parameter query. The CPU which composed of the advanced
embedded processor and peripheral circuit is the control center of the whole tank gauge system. The
safety barrier is intrinsic safe parts, offer safety power to probe. The power supply module provides
safe and reliable power for the whole system.
WB-SE100 Ex-proof console
1. Summary
SE100 Explosion-Proof Smart Console User Manual
3
1.2. Features and Technical Parameters
System Features
6 inches LCD graphical display, clearly and visualized.
Monitor up to 3 tanks in real time, visual display oil product level, water level, volume and
temperature.
Automatically alarm with visible flashing, automatically release alarm, and can generate
alarm report.
Alarm of high oil level, low oil level, high temperature and high water level.
Supports shift manually, can generate shift report and inventory report.
Real time monitor delivery status, and can generate delivery report.
Real time clock.
Supports to monitor oil gas density nearby tank.
Supports alarm of oil gas density.
Standard configure 7 relay outputs.
Technical Parameters
Power AC220V+/-10%, 50/60Hz
Working temperature -20 to 30 Centigrade ( -4 to 140F)
Resolution of screen 320 x240
Size of screen 6''
RS485 Port 1
RS232 Port 1
Monitor tanks 3
Output Relays 7 Groups, Capacity AC250V/10A, 30V/10A
Intrinsically safety barrier WINDBELL GSB03
Explosion proof grade Exd [ia] II AT4 Gb
Enclosure dimension 40cm×34cm×16cm (L×H×W)
Weight 30KGS
Loading...