Wincor Nixdorf P4-EPC COMPACT / B-E2 Operating Instructions
P4-EPC COMPACT / B-E2
With Socket-Based Intel Celeron, Intel Pentium IV, Mobile Intel Pentium
IV Processor - M
Operating Manual
Edition Sep 2005
P4
-
EPC
C
OMPACT
/
B-E2
Operating Manual
NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN
IT, MAY BE REPRODUCED, TRANSMITTED, TRANSCRIBED, STORED IN A RETRIEVAL
SYSTEM, OR TRANSLATED INTO ANY L ANGUAGE IN ANY FORM OR BY ANY MEANS,
EXCEPT DOCUMENTATION KEPT BY THE PURCHASER FOR BACKUP PURPOSES,
WITHOUT THE EXPRESS WRITTEN PERMISSION OF MANUFACTURER.
MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
IN NO EVENT SHALL MANUFACTURER, ITS DIRECT O RS, OFFICERS, EMPLOYEES OR
AGENTS BE LIABLE FOR ANY INDIRECT. SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF
USE O R DATA, INTERUPTION OF BUSINESS AND THE LIKE), EVEN IF MANUFACTURER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT
BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES,
AND ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S
BENEFIT, WITHOUT INTENT TO INFRINGE
IBM, IBM PC, IBM PC/AT, PC-DO S, OS/2 AND OS/2 WARP ARE REGISTERED TRADEMARKS
OF INTERNATIONAL BUSINESS MACHINES CORPORAT ION.
MS-DOS, WINDOWS, WINDOWS NT, WINDOWS 98 AND WINDOWS 95 ARE REGISTERED
TRADEMARKS OF MICROSOFT CORPORATION.
AWARD BIOS IS A PRODUCT OF AWARD SOFTWARE INC.
THIRD-PARTY BRANDS AND NAMES MENTIONED IN THIS USER’S GUIDE ARE THE
PROPERTY OF THEIR RESPECTIVE OWNERS.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT
NOTICE, AND SHOULD NOT BE CONSTURED AS A COMMITMENT BY MANUFACTURER.
MANUFACTURER ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
BEETLE™ IS A REGISTERED T RADEM ARK OF WINCOR NIXDORF GMBH & CO. KG
CELERON™ IS A REGISTERED TRADEMARK OF THE INTEL CORPORATION
PENTIUM™ IS A REGISTERED TRADEMARK OF THE INTEL CORPORATION
COPYRIGHT © 2005 MANUFACTURER ALL RIGHTS RESERVED.
DELIVERY SUBJECT TO AVAILABILITY; TECHNICAL MODIFICATIONS POSSIBLE.
Contents
01750100200 A P4-EPC Compact /B-E2 – Operating Manual
Contents
MANUFACTURER’S CERTIFICATION ..................................................1
TESTED SAFETY ...........................................................................................1
FCC-CLASS A DECLARATION........................................................................1
NOTE ON THE LASER ..................................................................................... 1
IMPORTANT NOTES........................................................................................2
REPLACING THE LITHIUM BATTERY.................................................................3
POWER CORD SELECTION.............................................................................4
FEATURES – P4-EPC COMPACT.....................................................7
MAIN FEATURES...........................................................................................7
PROCESSOR SUPPORTED..............................................................................9
DISPLAY RESOLUTION SUPPORTED ................................................................9
F
UNCTIONS & INDICATORS ON THE
P4-EPC COMPACT................10
1 – ON/OFF BUTTON .................................................................................10
2 – RESET SWITCH ...................................................................................10
3 – POWER-ON INDICATOR .......................................................................10
4 – HARD-DISK INDICATOR .......................................................................10
5 – FLOPPY-DISK INDICATOR ...................................................................10
6 – CD-ROM INDICATOR ............................................................................10
7 – USB CONNECTOR (FRONT PANEL).........................................................11
D
RIVES ON THE
P4-EPC COMPACT............................................12
FLOPPY DRIVE ...........................................................................................12
HARD-DISK DRIVE...................................................................................... 12
CD-ROM/DVD DRIVE ................................................................................12
B
ACK PANEL CONNECTORS ON THE
P4-EPC COMPACT..............13
POWER-SUPPLY UNIT .................................................................................14
ON-BOARD DVI (TFT FLAT PANEL DISPLAY) ................................................15
VGA CONNECTOR (BLUE 15-PIN VGA)........................................................15
PS/2 MOUSE CONNECTOR (GREEN 6-PIN MINI-DIN)......................................16
PS/2 KEYBOARD CONNECTOR (PURPLE 6-PIN MINI-DIN) ..............................16
USB PORTS 1 & 2 (TWO 4-PIN UNIVERSAL SERIAL BUS) ...............................17
USB PORTS 3 & 4 (TWO 4-PIN UNIVERSAL SERIAL BUS) ...............................17
MIDI/GAME CONNECTOR (GOLD 15-PIN GAME_AUDIO)..............................18
AUDIO PORT CONNECTORS (THREE 1/8” GAME_AUDIO) ............................18
SERIAL PORT COM1 CONNECT OR (TEAL/TURQUOISE 9-PIN MALE).................19
SERIAL PORT COM2 CONNECT OR (WHITE 9-PIN FEMALE) .............................19
PARALLEL PORT CONNECTOR (BURGUNDY 25-PIN PRINTER)....................... 20
Contents
P4-EPC Compact /B-E2 – Operating Manual 01750100200 A
A
PPENDIX
....................................................................................21
TECHNICAL DATA FOR THE P4-EPC COMPACT...........................................21
MODEL TYPE AND SERIES FOR P4-EPC COMPACT.....................................22
Manufacturer’s Certification
01750100200 A P4-EPC Compact /B-E2 – Operating Manual 1
Manufacturer’s Certification
The device complies with the requirements of the EEC
directive 89/336/EEC with regard to “Electromagnetic
compatibility” and 73/23/ECC “Low Voltage Directive”.
Therefore, you will find the CE mark on the device or packaging.
Tested Safety
In addition, the P4-EPC COMPACT has received the UL
symbol and cUL symbol.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, use s, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Modifications not authorized by the manufacturer may void users authority to operate
this device.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NBM-003 du Canada.
Note on the laser
If your device is equipped with a CD-ROM drive, the following condition applies:
The CD ROM drive contains a light-emitting diode (LED), classified according to IEC
825-1:1993:LASER CLASS 1; it must not be opened.
Important notes
2 P4-EPC Compact/B-E2 – Operating Manual 1750100200 A
Important notes
The P4-EPC COMPACT system is a computer for manufacturer’s usage.
It is conforming to the current safety standards for data processing equipment.
If this device is taken from a cold environment into the operating room, moisture
condensation may form. The device must be absolutely dry before being put into
service; an acclimatization period of at least two hours must therefore be
observed,
This device is equipped with a safety-tested power cable and may be connected
only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device and the
grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off the device
and disconnect the power plug.
Ensure that no foreign ob jects (e.g. office clips) find their way into the device, as
this may lead to electric shocks or short-circuits.
In order to ensure that the device is well ventilated and to prevent over heating, do
not obstruct the ventilation slots on your device.
Never plug in or unplug data communi cation lines during thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts in an environmentally safe manner.
In emergencies (e.g. damaged housing or damaged power cable, penetration by
liquids or foreign bodies), the device must be switched off immediately, the power
plug disconnected and the Customer Service of Wincor Nixdorf (WN) or your
dealer must be notified.
Your P4-EPC COMPACT system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guarantee a
faultless and efficient work of your system.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may not only
seriously jeopardize the safety of the user, but also cancel all warranty and liability
agreements.
WARNINGS:
Loading...