Wincor Nixdorf L1, L2 User Manual
L1 and L2 POS Motherboard
(with BIOS Setup)
User Manual
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Wincor Nixdorf International GmbH
Documentation R&D SAT 11
Wohlrabedamm 31
D-13629 Berlin
E-Mail: retail.documentation@wincor-nixdorf.com
Order No.: 010750266922A
Your opinion:
L1 and L2 POS Motherboard
User Manual
Edition November 2014
All brand and product names mentioned in this document are trademarks of
their respective owners.
Copyright © Wincor Nixdorf International GmbH, 2014
The re production, transmission or use of this document or its contents is not permitted without
express authority. Offenders will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical
modifications possible.
Contents
Overview ....................................................................................... 1
Introduction ....................................................................................... 1
Some Highlights of the L1 and L2 Motherboard ................................ 1
Motherboard Specification ............................................................ 3
Block Diagram .................................................................................... 3
Internal Connectors ........................................................................... 4
Mainboard assembly variants ............................................................ 5
CPU support ....................................................................................... 5
Mainboard internal connectors and onboard features ..................... 5
USB 2.0 (internal) .......................................................................... 5
Mini PCI Express ............................................................................ 6
Memory (internal) ......................................................................... 7
SATA (internal) .............................................................................. 7
Fan (internal) ................................................................................. 7
Chassis intrusion connector (internal)........................................... 8
Front panel connector (internal) ................................................... 8
ATX / 12V Power connector (internal) .......................................... 9
LPT (internal) ............................................................................... 10
TPM (onboard) ............................................................................ 10
PCI Express Slots (internal) .......................................................... 11
Mainboard onboard connectors with external access .................... 12
Motherboard I/O shield overview (external) .............................. 12
DVI-D (external) ........................................................................... 12
VGA (external) ............................................................................. 12
LAN (external) .............................................................................. 12
USB 2.0 / USB 3.0 (external) ........................................................ 12
COM (external) ............................................................................ 13
Audio (external) ........................................................................... 13
Technical Data ............................................................................. 14
Supported Sleep States .................................................................... 15
Changing the Battery ................................................................... 17
UEFI BIOS Setup ........................................................................... 18
Standard UEFI BIOS Version ............................................................. 18
BIOS Menu Bar ................................................................................. 19
Legend Screen .................................................................................. 19
General Help .................................................................................... 20
Scroll Bar .......................................................................................... 20
Sub-Menu ......................................................................................... 21
Info Screen ....................................................................................... 21
Product Name: ............................................................................. 22
BIOS Version: ............................................................................... 22
Ethernet MAC Address: ............................................................... 22
UUID Info: .................................................................................... 22
System, Main board, Power Supply: ............................................ 22
Main Menu .................................................................................. 23
System Date [MM/DD/YYYY] ........................................................... 23
System Time [XX: XX: XX] ................................................................. 23
Processor and Chipset Information .................................................. 23
Advanced Menu ........................................................................... 24
Sub Menu ACPI Settings ............................................................... 24
Enable ACPI Auto Configuration .................................................. 25
Sub Menu Trusted Computing ..................................................... 25
Security Device Support [Disable] ............................................ 25
TPM State [Disabled] ................................................................ 25
Pending operation [None] ....................................................... 25
Sub Menu Hardware Configuration ............................................. 26
PCH LAN Controller [Enabled] .................................................. 26
Launch PXE OpROM policy [Do not launch] ............................. 26
Wake On LAN [Disabled] .......................................................... 26
Wake On Ring [Disabled].......................................................... 26
Wake On USB/PS2 [Disabled] ................................................... 27
Wake On PCIe Slot [Disabled] .................................................. 27
Wake-on Modes .......................................................................... 27
Restore AC Power Loss [Follow AC Power] .............................. 27
Bootorder Menu [Enabled] ...................................................... 28
Sub Menu CPU Configuration ...................................................... 28
Hyper-threading [Enabled] ....................................................... 28
Active Processor Cores [All] ..................................................... 29
Overclocking lock [Disabled] .................................................... 29
Limit CPUID Maximum [Disabled] ............................................ 29
Execute Disable Bit [Enabled] .................................................. 29
Intel Virtualization Technology [Enabled] ................................ 29
Hardware Prefetcher [Enabled] ............................................... 29
Adjacent Cache Line Prefetch [Enabled] .................................. 30
CPU AES * [Enabled] ................................................................ 30
Boot performance mode [Max Non-Turbo Performance] ....... 30
EIST [Enabled] .......................................................................... 30
Turbo Mode * [Enabled] .......................................................... 30
Intel TXT (LT) Support * [Enabled] ........................................... 30
Sub Menu SATA Configuration .................................................... 31
SATA Controller(s) [Enabled] ................................................... 31
SATA Mode selection [IDE] ...................................................... 31
SATA 0, 1, 5 .................................................................................. 31
SATA 4 ......................................................................................... 32
Sub Menu Platform Thermal Configuration ................................ 32
Automatic Thermal Reporting [Enabled] ................................. 32
Active Trip Point 0 Fan Speed 100 ........................................... 32
Active Trip Point 1 [55 C] ......................................................... 32
Active Trip Point 1 Fan Speed 75 ............................................. 33
Passive TC1 Value 1 .................................................................. 33
Passive TC2 Value 5 .................................................................. 33
Passive TSP Value 10 ................................................................ 33
PCH Thermal Device [Disabled] ............................................... 33
Sub Menu PCH-FW Configuration ................................................ 34
Intel ME (Management Engine) Subsystem ................................ 34
MEBx Type [None] ................................................................... 34
MDES BIOS State Code [Disabled] ........................................... 34
Sub Menu AMT Configuration ..................................................... 35
Intel AMT [Enabled] ................................................................. 35
BIOS Hotkey Pressed [Disabled] ............................................... 35
MEBx Selection Screen [Disabled] ........................................... 36
Hide Un-Configure ME Confirmation [Disabled] ...................... 36
MEBx Debug Message Output [Disabled] ................................ 36
Un-Configure ME [Disabled] .................................................... 36
AMT Wait Timer 0 .................................................................... 36
Disable ME [Disabled] .............................................................. 36
ASF [Enabled] .......................................................................... 36
Activate Remote Assistance Process [Disabled] ...................... 36
USB Configure [Enabled] .......................................................... 36
PET Progress [Enabled] ............................................................ 36
WatchDog [Disabled] ............................................................... 37
Sub Menu USB Configuration....................................................... 37
Legacy USB Support [Enabled] ................................................. 37
USB3.0 Support [Enabled] ........................................................ 37
XHCI Hand-off [Enabled] .......................................................... 38
EHCI Hand-off [Enabled] .......................................................... 38
USB Ports Per-Port Disable Control [Enabled] ......................... 38
USB Mass Storage Driver Support [Enabled] ........................... 38
PORT 60/64 Emulation [Enabled]............................................. 38
Sub Menu NTC6106D Super IO Configuration ............................. 38
Parallel Port Configuration .......................................................... 39
Sub Menu NTC6106D H/W Monitor ............................................ 39
Sub Menu Serial Port Console Redirection .................................. 40
Console Redirection [Enabled] ................................................. 40
Sub Menu CMOS ...................................................................... 41
Sub Menu Intel(R) Ethernet Network Connection .................. 42
Chipset Menu ................................................................................... 43
Sub Menu PCH-IO Configuration ............................................. 43
Sub Menu System Agent (SA) Configuration ........................... 44
Boot Menu ....................................................................................... 46
Quiet Boot [Disabled] ............................................................... 47
Fast Boot [Disabled] ................................................................. 47
Boot mode select [LEGACY] ..................................................... 47
Fixed Boot Order Priorities ‘#n’ Boot Device ............................... 47
Security Menu .................................................................................. 48
Administrator Password .............................................................. 48
Intrusion Detection [Disabled] ................................................ 48
Sub Menu Security Menu Secure Boot menu ..................... 49
Save & Exit Menu ............................................................................. 50
Discard Changes and Exit ............................................................. 50
Save Changes and Reset .............................................................. 50
Discard Changes and Reset .......................................................... 51
Restore Defaults .......................................................................... 51
Boot Override .............................................................................. 51
Launch EFI Shell from File System Device .................................... 51
Test Points Codes ............................................................................. 51
Checkpoint Ranges ...................................................................... 51
SEC Phase ..................................................................................... 52
PEI Phase ..................................................................................... 52
PEI Beep Codes ............................................................................ 55
DXE Phase .................................................................................... 55
DXE Beep Codes .......................................................................... 58
Abbreviations .............................................................................. 59
L1 and L2 Motherboard, User Manual 1
Overview
Introduction
This manual describes the features of two variants of a Motherboard based
on the Intel 8 series chipset Q87 and H81, formerly known as Lynx Point.
These L1 and L2 Motherboards were primarily designed for the Wincor
Nixdorf Systems EPC_5G, EPC_5G_DC and EPC_5G_Upgrade.
Some Highlights of the L1 and L2 Motherboard
4th Generation Intel® Core™ Processors, formerly known as Haswell
Intel 8 series chipset Q87 and H81, formerly known as Lynx Point
CPU integrated graphic controller up to Intel® HD Graphics 4600,
depending on used processor
AMT 9.1 support at L1 motherboards
1x VGA Interface
1x DVI-D interface
Gigabit LAN onboard (Intel® Ethernet Connection; Q87: I217-LM,
H81: I217-V)
3 SATA ports (Q87: 3xSATA III, H81: 2x SATA III + 1x SATA II)
2x DDR3 SODIMM sockets, supporting up to 16GB (2x8GB) at
1600MHz. Only ~3GB available for 32bit OS
1x PCI Express x16 gen3
2x PCI Express x1 gen2
2 Standard COM ports
1 LPT port
2 L1 and L2 Motherboard, User Manual
MiniPCIe socket (full size) supporting the WN NVRAM module
2 USB3.0 ports
Q87: 12 USB2.0 ports, H81: 8x USB ports
TPM onboard
PC Beeper onboard
TFT- displays without DDC are not supported.
L1 and L2 Motherboard, User Manual 3
Motherboard Specification
Block Diagram
VGA
LPC
Dual Channel DDR3
DVI Level Shifter
PI3VDP411
PCIe x16
DVI-D
DMI
FDI
PCI Express x1
SATA II/III
USB2.0
USB3.0
2x PCIe x1 Slot
3x SATA Ports
Up to 12
USB2.0 Ports
2x USB3.0
Ports
VGA
HD Audio Link
PCI Express x1
HD Audio
Codec ALC662
SPI
BIOS
64 / 128Mbit
COM
LPT
LPT
SIO
NCT6106D
COM 1+2
LPC
LPC
miniPCIe
Lynx Point PCH
Q87 / H81
1Gb LAN
I217LM /1217V
LGA 1150
Haswell + Haswell
Refresh CPU
65W TDP max.
2x DDR3
SODIMM
Socket
PCI Express x16
PCI Express x1
TPM
4 L1 and L2 Motherboard, User Manual
Internal Connectors
JP3
JP4
L1 and L2 Motherboard, User Manual 5
Mainboard assembly variants
As mentioned above there are two motherboard variants: The L1 board
with Q87 chipset supporting AMT and RAID and the L2 board with H81
chipset as value edition supporting lesser features.
CPU support
CPU
CPU#
#CPU
core
#Threads GHz
Core
GHz
GFX
Cache
size
TDP
[W]
i5
i5-4570TE
2 4 2.7 (3.3)
0.35 (1)
4MB
35
i5 i5-4570S 4 4 2.9 (3.6) 0.35(1.15) 6MB 65
i3 i3-4330TE 2 4 2.4 0.35 (1) 4MB 35
i3
i3-4330
2 4 3.5
0.35 (1.15)
4MB
54
Pentium G3320TE 2 2 2.3 0.35 (1) 3MB 35
Pentium G3420 2 2 3.2 0.35 (1.15) 3MB 53
Celeron G1820TE 2 2 2.2 0.35 (1) 2MB 35
Celeron G1820 2 2 2.7 0.35 (1.05) 2MB 53
Mainboard internal connectors and onboard features
USB 2.0 (internal)
6 USB ports at L1 board and 2 USB ports at L2 are routed to 10pin double
row headers with 2.54 mm pitch. Each header provides 2 ports. These
headers are intended to connect optional front USB modules or USB hubs.
Two USB ports share one fuse. USB port 11 at header USB3 (pins 1,3,5,7) is
shared with PCIe x1 connector PCIE3 (pins A5 to A8) for USB uplink connection for the "Retail Card".
6 L1 and L2 Motherboard, User Manual
Mini PCI Express
The mainboard provides a full size mini PCI Express (rev.1.1) / mSATA
connector. It is placed on top, thus being accessable without removing
other components. It supports LPC signals including serial interrupts. Auto
detection by mSATA presence detect supports automated switch between
mSATA and PCIe functionality (PCIe functionality only supported in
conjunction with Q87 chipset according to mini PCI Express Standard
Rev 1.1). The L1 motherboard supports PCIe and mSATA functionality,
the L2 motherboard supports mSATA functionality only.
Connector type: Standard MiniPCIe 1.1 connector full size
Pin
Function
Pin
Function
1
WAKE
2
VCC3
3
n.c.
4
GND
5 n.c. 6 VCC 1.5V
7 CLKRQ# 8 FRAME#
9 GND 10 LAD3
11 REFCLK- 12 LAD2
13 REFCLK+ 14 LAD1
15 GND 16 LAD0
17 SUSCLK 32KHz 18 GND
19 CLK 33MHz 20 n.c.
21
GND
22
RESET#
23
PCIE_RX- / SATA +B
24
3VSB
25
PCIE_RX+ / SATA -B
26
GND
27
GND
28
VCC 1.5V
29 GND 30 SMB_CLK
31 PCIE_TX- / SATA -A 32 SMB_DATA
33 PCIE_TX+ / SATA +A 34 GND
35 GND 36 n.c. (USB-)
37 GND 38 n.c. (USB+)
39
VCC3
40
GND
41
VCC3
42
n.c.
43
GND
44
n.c.
45
n.c.
46
n.c.
47
n.c.
48
VCC 1.5V
49
n.c.
50
GND
51
mSATA presence detect
52
VCC3
L1 and L2 Motherboard, User Manual 7
Memory (internal)
The mainboard provides two DDR3 SODIMM sockets supporting up to
16GB in dual channel mode. The horizontal mounting of the SODIMM
sockets ensures an optimal air flow.
SATA (internal)
The mainboard provides three standard SATA ports. The ports SATA1
(white) and SATA2 (blue) supporting SATA III connectivity speed.
Port SATA3 (black) supports SATA III speed at L1 board, and SATA II
speed at L2 board. The RAID functionality is only supported by the L1
motherboard.
Fan (internal)
The mainboard provides two fan connectors. The CPU fan connector
supports PWM fans with 4 pin connection.
Connector details are: 2.54mm (.100") Pitch Vertical Header, with Friction
Lock, 4 (3) Circuits, PC Tail Length: 3.50mm (.138"). Molex Part Nr: 470531000 or similar. The connector follows the Intel “4-Wire Pulse Width
Modulation (PWM) Controlled Fans” specification.
PWM Fan
Pin
Signal
Signal Description
1 GND GND
2 12 V Fan operation voltage
3 Sense Tachometric signal
4 Control PWM control signal (only
4 pin connector)
The PSU fan connector has 3 pin connection with DC fan speed regulation.
DC Fan
Pin Signal Signal Description
1 GND GND
2
PWR
Operation Voltage 6-12 V
3
Sense
Tachometric signal
8 L1 and L2 Motherboard, User Manual
Chassis intrusion connector (internal)
The mainboard supports a chassis intrusion connector.
Type: 3 pin shrouded header, B3B-PH-K-S (JST) or equivalent.
Pin Number Function
1
GND
2 Intrusion input (switch to GND
if chassis is open)
3 n.c.
Front panel connector (internal)
The mainboard supports a front panel connector to support service elements (like POWER ON pushbutton, HDD and power LEDs).
The Power LED at the chassis front connected to this front panel header
is green when system is powered on (S0). During Stand By (S3) it blinks
green and when system is in hibernation (S4) or powered down (S5) the
LED is orange.
Power Status Power LED
S0
Green
S3
Green blinking
S4, S5
Orange
The BIOS is able to disable the power button. This feature is automatically
enabled when "Follow AC power" is selected within the BIOS setup. Then it
is not possible to switch off the system by the power button, even when
pressed longer than 4s. But when the OS is shut down correctly, system
can be switched on again by the power button.
The front panel header also supports speaker connection.
L1 and L2 Motherboard, User Manual 9
Type: 2x6 pin header, 2.54 mm pitch.
Pin Number
Function
1
Power switch +
2
Reset switch +
3
Power switch -
4
Reset switch -
5
Power LED +
6 Speaker 7 Power LED 8 Coding
9 HDD LED +
10 GND
11 HDD LED 12 Speaker +
ATX / 12V Power connector (internal)
The mainboard provides a 4 pin and a 24 pin ATX power connector.
Pin Number
Function
1,2,12,13
+3.3V
3,5,7,15,17,18,19,24
GND
4,6,21,22,23
+5V
8
Power ok
9
5V SB
10, 11
+12V
14 -12V
16 PSON
20 n.c.
Pin Number Function
1,2 GND
3,4 +12V
A 20 pin ATX power cable can be plugged into the 24 pin connector on the
motherboard, too. In this case the pins 11,12,23 and 24 are not used and
10 L1 and L2 Motherboard, User Manual
left open. The 4 pin ATX power connector has to be connected to the PSU
anyway, otherwise the motherboard will not work.
LPT (internal)
Connector type: 26 pin shrouded header, 2.54mm pitch
Pin Function Pin Function
1 STR# 14 GND
2 AFD# 15 D6
3 D0 16 GND
4 ERR# 17 D7
5 D1 18 GND
6 PINIT# 19 ACK#
7
D2
20
GND
8
LPT_SLIN#
21
BUSY
9 D3 22 GND
10 GND 23 PE
11 D4 24 GND
12 GND 25 SLCT
13 D5 26 Key
TPM (onboard)
The mainboard provides the Infineon SLB 9635 TT 1.2 Trusted Platform
Module (TPM) with firmware 3.19 directly soldered on the PCB.
Jumper 4 (JP4):
Enables/Disables the TPM Chip. Default setting is position 1-2, TPM enabled. To disable the TPM set Jumper to position 2-3.
JP4 TPM
1 2 3
JP3 PP
1 2 3
L1 and L2 Motherboard, User Manual 11
Jumper 3 (JP3):
Sets the physical presents (PP). Default setting is position 2-3, PP disabled.
To enable PP set Jumper to position 1-2.
PCI Express Slots (internal)
There are two PCIe slots x1 and one 1 PCIe slot x16.
Use in the systems BEETLE /MIII, EPC_5G, EPC_5G_DC or EPC_5G_Upgrade
Only low profile cards are supported.
Height 68.90 mm (2.731 inches) maximum,
Length 167.65 mm (6.600 inches) maximum
PCIe cards are able to wake up the system.
Thermal management: The input power of a single PCIe x1 card must not
exceed 10W and x16 card does not exceed 30W.
The PCIe slot at the outer side of the mainboard supports USB signals on
PCIe pins A5 (D-) and A8 (D+) as USB uplink connection and A6+A7 (VBUS)
to Retail specific PCIe card.
The same USB port is routed to the USB3 connector.
Onboard power button and status LED (internal)
The motherboards support one onboard power button in rear I/O shield
area. The button’s position protects it from being touched accidentally
or being pushed by cables.
The motherboards support 2 dual color onboard LEDs indicating the power
status (green) and HDD activity (red). The LEDs are visible outside of the
chassis through a chassis hole.
Power status Power LED
S0 Green
S3, S4, S5 Off
Onboard status LEDs and power button work together with an external
status LED and power button connected to the front panel connector.
12 L1 and L2 Motherboard, User Manual
Mainboard onboard connectors with external access
Motherboard I/O shield overview (external)
The picture below shows the arrangement of the onboard I/O connectors.
DVI-D (external)
This intervace uses a standard DVI-D connector supporting a single link
connection to a digital display. Only displays with DDC are supported.
VGA (external)
This interface uses a 15 pin DSUB connector in the upper row of I/O shield.
Sync signals VSYNC and HSYNC have 5V logic high level.
LAN (external)
The mainboard supports 1Gbit connection to a Local Area Network (LAN).
Indication LED for link and activity is available.
Right LED Speed Indication
10mbit off
100mbit green
1000mbit orange
Left LED
Link&Activity
Link at every speed
Yellow on
Traffic at every speed
Yellow blinking
WOL (wake on LAN) and PXE are supported.
USB 2.0 / USB 3.0 (external)
8 USB ports (6 for USB2.0 and 2 for USB3) are located in the mainboard I/O
connector area.
L1 and L2 Motherboard, User Manual 13
COM (external)
There are two standard RS232 COM ports (male 9pin DSUB connectors) at
the I/O shield.
Audio (external)
The mainboard supports a microphone-in, a line-out and a line-in
connector in I/O shield. The connector type is stereo 3.5mm diameter.
Loading...