Wincor Nixdorf CMD-V4 Service Manual

Cash Media Dispenser

Version 4

Service Manual

Questions and suggestions

Cash Media Dispenser Versi on 4 - Service Manual 01750060162 A

Do you have ...

...

any questions or suggestions

regarding this manual

Please contact the following address giving the order number of this manual in your message

Address:

Wincor Nixdorf International GmbH Handbuchredaktion BD P34 33094 Paderborn Germany

Fax: +49 (0) 52 51 693-62 09 E-mail:

manuals.hardware@wincor-nixdorf.com

Cash Media Dispenser Version 4

Service Manual

Edition April 2003

Cash Media Dispenser Versi on 4 - Service Manual 01750060162 A

All rights, including rights of translation and rights of reproduction by reprinting, copying or similar methods, even of parts, are reserved. Any violations give rise to a claim for damages

All rights, including rights created by patent grants or registration of a utility model or design, are reserved. Delivery subject to availability; right of technical modifications reserved.

All names of hardware and software products mentioned in this manual are trade names and/or trademarks of their respective manufactures.

This manual was produced using paper treated with chlorine-free bleach

01750060162 A Cash Media Dispenser Version 4 - Service Manual 0-1

C Contents..…...…………....………...…......

1 Introduction.....................................…....

(Safety precautions, technical data)

2 Function and Integration…….................

3 Device Overview and Operation…….....

4 Getting Started............................…….....

5 Troubleshooting.....................………......

6 Removal / Installation of Components..

7 Maintenance and Service.......................

8 Pin Assignments......................………....

9 Spare Parts..........................……………..

I Index....................………………………….

0-2 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

01750060162 A Cash Media Dispenser Version 4 - Service Manual C-1

Contents

Introduction ..................................................................................................1-1

Symbols used in this manual..........................................................................1-1

Important safety precautions..........................................................................1-2

General power interrupt..................................................................................1-4

Description of the device................................................................................1-5

Structure of the manual..................................................................................1-7

Outline.......................................................................................................1-7

Supplementary documentation ................................................................. 1-8

Technical data................................................................................................1-9

Cash media dispenser without output trans port........................................1-9

Stacker....................................................................................................1-10

Output transport...................................................................................... 1-10

Shutter .................................................................................................... 1-12

CMD controller........................................................................................ 1-13

4-cassette housing (without contents) ....................................................1-14

1-cassette housing (without contents) ....................................................1-14

Double dispensing unit without DDU ......................................................1-14

Double dispensing unit with DDU ...........................................................1-15

Single dispensing unit without DDU........................................................ 1-15

Single dispensing unit with DDU............................................................. 1-15

Reject / retract cassettes ........................................................................ 1-16

Cash-out cassettes................................................................................. 1-16

Environmental conditions........................................................................1-17

Climatic environmental conditions in accordance with EN 60721..... 1-17

Mechanical environmental conditions in accordance with EN 60721 1-17

Noise emission in accordance with EN 27779 .................................. 1-17

Compliance with standards and certifications......................................... 1-18

Environmental protection..............................................................................1-20

Environmentally friendly product design and development.....................1-20

Saving energy......................................................................................... 1-20

Disposing of used consumables.............................................................1-20

Labels on plastic case parts.................................................................... 1-20

Returning, recycl ing and disposing of used units and consumables......1-21

Further information..................................................................................1-21

Abbreviations................................................................................................1-22

Function and Integration.............................................................................2-1

Sensors and electromechanical components.................................................2-1

Contents

C-2 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Horizontal output transport ....................................................................... 2-1

Vertical output transport............................................................................ 2-2

Stacker and output transport .................................................................... 2-3

Components of dispensing unit and cassette........................................... 2-4

Procedures in the CMD-V4 (schematic)......................................................... 2-5

Dispensing in customer direction (vertical, frontload)............................... 2-6

Bundle reject.............................................................................................2-7

Single reject.............................................................................................. 2-8

Bundle retract when notes are not removed........................................... 2-10

Procedures in the CMD-V4.......................................................................... 2-11

Start-up behavior .................................................................................... 2-11

Controller test.................................................................................... 2-11

Firmware tt ........................................................................................ 2-11

Memory reset .................................................................................... 2-11

Determination of the device type....................................................... 2-12

Checking the cassettes..................................................................... 2-12

Checking the photosensors............................................................... 2-12

Checking the device l ocks................................................................. 2-12

Checking mechanical and electronic components ............................ 2-13

Checking the transport paths ............................................................ 2-13

Checking the shutter ......................................................................... 2-13

Dispensing.............................................................................................. 2-14

Checking the basic s tate ................................................................... 2-14

Double dispense/note sizes out of tolerance..................................... 2-14

Undefined notes................................................................................ 2-15

Dispensing of notes not possible....................................................... 2-15

Banknote jam .................................................................................... 2-15

Transport ................................................................................................ 2-16

Transport to waiting position ............................................................. 2-16

Bundle reject ..................................................................................... 2-16

Single reject....................................................................................... 2-16

Cash presentation (incl. waiting for removal), cash output................ 2-17

Retracting and storing banknotes...................................................... 2-17

Retracting cash without storing it ...................................................... 2-18

Cassette handling ........................................................................................ 2-19

CMD controller ............................................................................................. 2-20

Position of function groups ..................................................................... 2-22

Connectors on the CMD controller ......................................................... 2-23

Logical interface...................................................................................... 2-24

Command from host system ............................................................. 2-25

Acknowledgement by the CMD-V4 ................................................... 2-25

Overview of commands.......................................................................... 2-25

Contents

01750060162 A Cash Media Dispenser Version 4 - Service Manual C-3

Control block...........................................................................................2-27

CPU...................................................................................................2-28

Memory..............................................................................................2-28

Serial interface...................................................................................2-28

Status display.................................................................................... 2-28

Function button..................................................................................2-28

Photosensor electronics..........................................................................2-29

Measuring banknotes with the double detection unit (DDU)...................2-30

Component control..................................................................................2-31

Dispensing unit control......................................................................2-31

Cassette control.................................................................................2-31

Stacker transport..........................................................................................2-33

Stacker transport - EEPROM....................................................................... 2-35

Output transport ........................................................................................... 2-36

Shutter..........................................................................................................2-37

Dispensing unit.............................................................................................2-38

4-cassette housing without dispensing units...........................................2-38

4-cassette housing with two double dispensing units and 4-channel

distributor board...................................................................................... 2-39

Dispensing unit with dispensing shaft and magnetic clutch...............2-40

Photosensors in the dispensing unit.......................................................2-41

Pressure sensor......................................................................................2-41

Reject / retract cassette................................................................................2-42

Cash-out cassettes.......................................................................................2-44

Device Overview and Operation ................................................................. 3-1

Device overview .............................................................................................3-1

Horizontal cash-out Frontload...................................................................3-2

Horizontal cash-out Rearload ................................................................... 3-3

Vertical cash-out Frontload.......................................................................3-4

Vertical cash-out Rearload........................................................................ 3-5

1-cassette housing with single dispensing unit......................................... 3-6

Function elements and controls................................................................3-7

The cassettes................................................................................................. 3-8

Cash-out cassette.....................................................................................3-8

Reject / retract cassette............................................................................ 3-9

Removing the cassette ...........................................................................3-10

Opening the cassette..............................................................................3-11

Emptying the reject / retract cassette......................................................3-12

Setting the low c ash sensor....................................................................3-13

Setting the banknote width......................................................................3-14

Removing banknotes.........................................................................3-14

Contents

C-4 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Removing the banknote rails............................................................. 3-15

Inserting the banknote rails............................................................... 3-16

Setting the banknote height.................................................................... 3-20

Filling the cash-out cassette................................................................... 3-22

Preparing the cash-out cassette........................................................ 3-22

Preparing the banknote bundles ....................................................... 3-24

Inserting banknote bundles ............................................................... 3-25

Special comments for deformed banknotes...................................... 3-28

Inserting the cassette.............................................................................. 3-30

Closing the cassette.......................................................................... 3-30

Inserting the cassette........................................................................ 3-31

Cassette initialization ................................................................................... 3-32

Determining the reference value.................................................................. 3-32

Function test................................................................................................. 3-34

Start-up ......................................................................................................... 4-1

Initial start-up.................................................................................................. 4-1

Start-up after component replacement........................................................... 4-2

Electronic adjustments for the CMD-V4......................................................... 4-3

Initializing the CMD-V4................................................................................... 4-4

Jumper settings on the CMD c ontroller .................................................... 4-5

Position of the jumper panel on the CMD controller............................ 4-5

Default settings.................................................................................... 4-7

Adjusting cash cassettes to the note size...................................................... 4-8

Filling cassettes with real cash and inserting them........................................ 4-8

Updating note parameters and cassette replenishment data......................... 4-8

Calculating reference values for the various note types ................................ 4-8

Authenticating the cash.................................................................................. 4-8

Troubleshooting........................................................................................... 5-1

Displays at startup.......................................................................................... 5-2

Displays in normal operation.......................................................................... 5-3

Dirty photosensors / sensors.................................................................. 5-17

Checking the note paths.............................................................................. 5-21

Locking/unlocking handle blocked ............................................................... 5-22

Checking the vertical transport............................................................... 5-23

Checking the dispensing areas............................................................... 5-24

Checking the stacker and output transport............................................. 5-25

Removal/Installation of Components......................................................... 6-1

Pulling out / pushing in the CMD-V4 .............................................................. 6-1

Contents

01750060162 A Cash Media Dispenser Version 4 - Service Manual C-5

CMD controller ............................................................................................... 6-2

Stacker........................................................................................................... 6-3

Horizontal output transport.............................................................................6-5

Ouput transport ProCash 2000xe RL.............................................................6-6

Output transport ProCash 2050xe..................................................................6-7

Ouput transport ProCash 2100xe RL.............................................................6-8

Shutter ProCash 2000xe RL .......................................................................... 6-9

Shutter ProCash 2050xe RL ........................................................................ 6-10

Shutter ProCash 2100xe RL ........................................................................ 6-11

Shutter ProCash 2150xe RL ........................................................................ 6-12

Distributor board...........................................................................................6-13

Dispensing units...........................................................................................6-15

Upper dispensing unit with thickness measuring station ........................ 6-15

Lower dispensing unit.............................................................................6-17

Clamp...........................................................................................................6-19

Maintenance and Service ............................................................................7-1

Maintenance...................................................................................................7-1

Maintenance intervals............................................................................... 7-1

Performing maintenance...........................................................................7-1

Stacker ................................................................................................7-3

Output transport...................................................................................7-3

Shutter.................................................................................................7-3

Cash-out cassettes..............................................................................7-3

Reject / retract cassette.......................................................................7-4

General................................................................................................7-4

Approved maintenance materials .............................................................7-5

Pin Assignments .......................................................................................... 8-1

Power supply connector (supply voltage).......................................................8-1

Safety switch..................................................................................................8-1

Basic module..................................................................................................8-1

Main motor M1 ............................................................................................... 8-3

Stacker........................................................................................................... 8-3

Frontload module ........................................................................................... 8-5

Dispensing unit 1 (module positions 1 and 2)................................................8-6

Cassette connector at dispensing unit 1 ........................................................8-8

Dispensing unit 2............................................................................................8-9

Cassette connector at dispensing unit 2 ......................................................8-11

Extension connec tor for dispensing unit 3....................................................8-12

Connector for shutter (incl. Z module).......................................................... 8-14

Connector for thickness measuring station..................................................8-16

Contents

C-6 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Connection of door switch ............................................................................ 8-17

Battery connector.................................................................................... 8-17

RS232C connecti on ..................................................................................... 8-18

CMD controller ............................................................................................. 8-19

4-channel distributor board........................................................................... 8-39

Spare Parts ................................................................................................... 9-1

Overview of individual parts........................................................................... 9-1

Index............................................................................................................... I-1

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-1

Introduction

This service manual has been compiled for authorized service personnel only. The operating manual, the installation guide and the service manual of the basic device should also be read since certain details are only described in those manuals.

Symbols used in this manual

− Text following a dash represents an item in a list. " " Text in quotation marks refers to other chapters or sections in this

document.

• Text following this symbol describes actions to be performed in the

specified order.

Text following this symbol should be given special attention in order to

avoid damage and injury.

Text following this symbol contains general information to facilitate use

of the device and help avoid operating errors.

Important safety precautions Introduction

1-2 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Important safety precautions

Please read the following notes carefully before doing any work on the

device.

This device complies with the relevant safety regulations for information processing equipment and is designed for use in a regular office environment.

− When moving the device from a cold to a warm environment, do not operate it for at least two hours to prevent possible damage caused by condensation.

− Only use the original packaging material to transport the device.

− The device is equipped with a safety-tested power cable which must be

connected only to a suitable grounded outlet.

− Always hold the plug when removing the power cable. Never pull the cable itself.

− Install all cables in such a way that they will not be stepped on or tripped over or damaged and crushed in any other way.

− Have damaged cables replaced immediately.

− Make sure that there is always free access to the sockets used or to the

electrical circuit-breakers of the house installation.

− In case of an emergency (e. g. damaged cabinets, controls or power cables, liquids or f oreign objects in the device) observe the following instructions:

Deactivate the device immediately by:

Switching off the automatic circuit-breaker or removing the fuse inset from the fuse holder in the distribution box of the building installation;

Disconnecting the plug connector of the power supply cable from the grounded socket in the building installation;

Switching the power switch on the power distributor to OFF (refer to the operating manual of the basic device);

Disconnecting power between the UPS (uninterruptible power supply) and the device (refer to the operating manual of the basic device).

Introduction Important safety precautions

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-3

− During a thunderstorm, data transmission lines may not be connected or disconnected.

− Only use accessories and extension components which have been approved by us. Nonobservance can result in damage to the system or violations of regulations concerning saf ety, radio interference and ergonomical requirements.

− Note that there are only safety extra-low voltage circuits (SELV circuits) if you want to feed voltage from an external source into prepared cables to install additional electronics (e.g. connection for an intruder alarm system).

− To clean the device only use cleaning agents approved by Wincor Nixdorf International GmbH (see chapter "Maintenance and Service").

Repair work

Repair work may only be carried out by authorized personnel.

Unauthorized opening of the device or repair work carried out improperly could result in considerable danger to the user.

In case of noncompliance, Wincor Nixdorf International GmbH excludes all liability.

General power interrupt Introduction

1-4 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Lithium batteries

There is danger of fire or explosion if the batteries are handled incorrectly. It is therefore important to note the following points:

− Avoid short circuits.

− Never recharge the battery.

− Avoid temperatures above 100 °C.

− Do not try to open the battery by force.

− Do not allow the battery to come into contact with water or fire.

Replace only with the same or an equivalent type recommended by Wincor Nixdorf International GmbH.

Dispose of used batteries in compliance with national regulations and the manufacturer's specifications.

General power interrupt

A general power interrupt has the following effects:

– All currently running transactions are immediately aborted. – Dispensed banknotes remain in the transport paths of the cash

media dispenser. They will be transported to the reject/retract cassette of the CMD-V4 or they remain in the collecting position of the clamp after the device has been turned on again.

Introduction Description of the device

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-5

Description of the device

Function and use

The most important components in an automated teller machine is the Cash Media Dispenser (CMD-V4).

TheCMD-V4replacestheAZM-NG.TheCMD-V4andtheAZM-NGare software-compatible but not hardware-compatible.

CMD cassettes are basically upward- and downward-compatible with some restrictions. They are about 5 mm longer so they cannot simply be deployed in the ProCash BBA mini 3K (up to February 2003) and the ProCash BBA UT with a CEN safe. The ProCash BBA mini 3K requires a technic al modification forCMDcassettestobeinstalled.Theoldcassetteshavetobeusedinthe ProCash BBA UT with a CEN safe.

This manual describes the Cash Media Dispenser, version 4.

Here are some of the characteristics of the Cash Media Dispenser:

− High functional reliability (low reject rate, detection of dispenses of two notes)

− Convenient to use and maintain: Electronic and mechanical adjustments have been minimized Maintenance intervals: Every two years or after 200,000 transactions

− All known requirements for ecological reuse and disposal have been satisfied.

Description of the device Introduction

1-6 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

The CMD-V4 can be tailored to the user's specific requirements thanks to model variants (frontload/rearload) and a variable number of dispensing units in the various housings. The CMD-V4 can consist of the following components, depending on the conf iguration:

− Stacker transport facility with or without single reject

− Horizontal/vertical output transport facility Rearload/Frontload

− 1-cassette housing with single dispensing unit

− 4-cassette housing with one double dispensing unit or two double

dispensing units

− CMD controller

− Cash-out cassette and reject / retract cassette

The single reject function is only available in devices which are delivered to countries outside the European Union.

Introduction Structure of the manual

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-7

Structure of the manual

Outline

The chapter "Introduction" describes the important safety precautions. It also gives an overview of the Cash Media Dispenser Version 4 (CMD-V4).

The features of the CMD-V4 are also described in the chapter "Introduction" in the section "Technical data”.

In the chapter "Function and Integration" you will find a description of the individual components of the cash media dispenser.

The "Device Overview and Operation" chapter describes, among other things, how to change the cash-out and reject/retract cassettes, replenish the cashout cassette and set the banknote size.

The "Start-up" chapter explains how the CMD-V4 is initialized. The "Troubleshooting" chapter lists the s tatus messages that may be output,

together with explanations and action to be taken. The next chapter "Removal/Installation of Components" provides detailed

information on how to replace the components. The chapter "Maintenance and Service" contains information on maintenance

work to be carried out regularly. The assignment of c onnector pins is described in the "Pin Ass ignments"

chapter. Finally, components that can be replaced in the Cas h Media Dispenser are

listed in the "Spare Parts" chapter.

Structure of the manual Introduction

1-8 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Supplementary documentation

For the operation and installation of the basic devices, separate manuals are available in several languages which also include a short description of the CMD-V4.

These manuals can be ordered from our print partner. They are also available in the intranet.

Usually the manufacturers' original manuals for OEM components are included in the shipment. They may c ontain more detailed information.

Introduction Technical data

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-9

Technical data

Cash media dispenser without output transport

Power supply: 5.5 A operation

11 A peak (approx. 20 ms)

Dimensions: The overall dimensions depend on

the actual configuration of the CMDV4.

Height

Four cassettes: 758 mm Five cassettes: 895.5 mm

Six cassettes: 1033 mm Width: 340 mm Depth with cassettes in place: 537 mm

Device weight without cass ettes and without single reject: max. 30 kg Banknote dimensions in mm: 54 x 85 x 0.08 to

92 x 182 x 0.12 Maximum number of notes per transaction: 60 Dispensing and transport rate: 6 - 8 banknotes / sec. Number of dispensing units: 2 to 6 Security functions implemented: Data Encryption Standard (DES)

for line encryption

Technical data Introduc tion

1-10 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Stacker

Dimensions

Depth: 505 mm Width: 301 mm Height: 208 mm

W eight

with single reject: 8.820 kg without single reject: 8.500 kg

Output transport

Vertical output transport Frontload in ProCash 2000xe and ProCash 2100xe Dimensions

Depth: 400 mm Width: 200 mm Height: 230 mm

W eight: 1.5 kg

Vertical output transport Rearload in ProCash 2000xe and ProCash 2100xe Dimensions

Depth: 400 mm Width: 200 mm Height: 230 mm

W eight: 1.5 kg

Introduction Technical data

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-11

Horizontal output transport Frontload 101 mm in ProCash 1500xe and ProCash BBA mini 3K

Dimensions

Depth: 130 mm Width: 200 mm Height: 50 mm

W eight: 1 kg

Horizontal output transport Frontload 241 mm in ProCash 2350xe and ProCash BBA UT

Dimensions

Depth: 250 mm Width: 200 mm Height: 50 mm

W eight: 1 kg

Horizontal output transport Rearload 124 mm in ProCash 1500xe and ProCash BBA UT

Dimensions

Depth: 130 mm Width: 200 mm Height: 50 mm

W eight: 1 kg

Horizontal output transport Rearload 232 mm in ProCash 2050xe, ProCash 2150xe and ProCash 2250xe

Dimensions

Depth: 345 mm Width: 227 mm Height: 57 mm

W eight: 0.52 kg

Technical data Introduc tion

1-12 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Shutter

Dimensions Shutter vertical Rearload and vertical Frontload

Depth: 310 mm Width: 150 mm Height: 100 mm

W eight: 0.5 kg

Dimensions Shutter horizontal Rearload

Depth: 305 mm Width: 126 mm Height: 67 mm

W eight: 0.9 kg

Dimensions Shutter horizontal Frontload

Depth: 310 mm Width: 150 mm Height: 100 mm

W eight: 0.9 kg

Introduction Technical data

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-13

CMD controller

Processor: 80C188XL 20 MHz Memory: 512 Kbyte static RAM

512 Kbyte Flash-PROM (PUT, bootloader)

Interface: V.24 (RS232), USB interf ace in

preparation

Transmission parameters

Line speed: 19.2 / 56 KBaud

automatic baud rate recognition Data format: NRZ Parity: ODD Code width: 8 Bit + Parity Stop bits: 2

Dimensions

Depth: 430 mm Width: 160 mm Height: 25 mm

W eight: 0.42 kg

Technical data Introduc tion

1-14 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

4-cassette housing (without contents)

Dimensions

Depth: 450 mm Width: 305 mm Height: 600 mm

W eight: 10.9 kg

1-cassette housing (without contents)

Dimensions

Depth: 450 mm Width: 305 mm Height: 162 mm

W eight: 3.34 kg

Double dispensing unit without DDU

Dimensions

Depth: 282 mm Width: 305 mm Height: 200 mm

W eight: 3.30 kg

Introduction Technical data

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-15

Double dispensing unit with DDU

Dimensions

Depth: 282 mm Width: 305 mm Height: 200 mm

W eight: 3.34 kg

Single dispensing unit without DDU

Dimensions

Depth: Still open W i dth: Still open Height: Still open

W eight: Still open

Single dispensing unit with DDU

Dimensions

Depth: Still open W i dth: Still open Height: Still open

W eight: Still open

Technical data Introduc tion

1-16 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Reject / retract cassettes

Capacity

Reject compartment: max. 400 notes Retract compartment: max. 100 notes

Dimensions

Depth: 250 mm Width: 100 mm Height: 100 mm

W eight: 1.5 kg

Cash-out cassettes

Banknote dimensions

Size: 54 x 85 mm to 92 x 182 mm Thickness: 0.08 mm to 0.12 mm

Filling capacity: Banknote bundles up to 310 mm thick

Dimensions

Depth: 441 mm Width: 264 mm Height: 125 mm

W eight: 3.5 kg

Introduction Technical data

01750060162 A Cash Media Dispenser Version 4 - Service Manual 1-17

Environmental conditions

Climatic environmental conditions in accordance with EN 60721

Class Ambient temperature°CRelative humidity

%r.h.

Operation 3K3 + 5 to + 55* 5 to 85 Transport 2K2 - 25 to + 70

(12 hours flying time)

10 to 95 (12 hours flying time)

Storage 1K2 + 5 to + 40

(max. 30 days)

10 to 85

* The temperature value of + 55 °C deviates from the value of the standard

(+ 32 °C).

Mechanical environmental conditions in accordance with EN 60721

Class Comment

Operation 3M2 Building with minimum external

vibration.

Transport (in original packing)

2M2 All types of commercial vehicles and

trailers as well as rail and air transport

Storage (in original packing)

1M3 Noticeable vibration and shocks, e.g.

by machines or passing vehicles

Noise emission in accordance with EN 27779

Noise values acc. to ISO 9296 Idle mode Operation*

Sound power level LWAd 6.1 B 6.9 B Workplace-related sound pressure level L

pAm (at

adjacent workplace)

44 dB 50 dB

* typical operating cycle.

Technical data Introduc tion

1-18 Cash Media Dispenser Version 4 - Service Manual 01750060162 A

Compliance with standards and certifications

Standards met

Safety standards: EN 60950

CSA C22.2-60950 UL 1950 UL 60950

EMC standards: EN 55022 class B

FCC CFR 47, part 15, subpart B, class A EN 55024

Conformity

The CE mark of conformity attached to the product or its package indic ates that the product complies with the requirements of the following EC directives:

− EMC Directive 89/336/EEC including the amending directive 93/68/EEC

− Low Voltage Directive 73/23/EEC including the amending directive

93/68/EEC The corresponding statement of compliance has been issued by Wincor Nixdorf International GmbH

Heinz-Nixdorf-Ring 1 33106 Paderborn Germany

Notes concerning radio interference suppression and electrical safety

All other devices connected to this product must comply with the EMC Directive 89/336/EEC including the amending directive 93/68/EEC and the Low Voltage Directive 73/23/EEC including the amending directive 93/68/EEC.

+ 204 hidden pages

Wincor Nixdorf CMD-V4 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual