Wincor Nixdorf BEETLE /XS User Manual
BEETLE /XS
Modular POS System
User Guide
Edition June 2003
Copyright© Wincor Nixdorf International GmbH, 2003
The reproduction, transmission or use of this document or its contents is not
permitted without express authority.
Linux™ is a registered trademark of Linus Torvalds
Pentium™ is a registered trademark of the Intel Corporation
MS-DOS™, Windows 95™, Windows 98™, Windows NT™ and Windows CE™ are
registered trademarks of the Microsoft Corporation
BEETLE™ is a registered trademark of Wincor Nixdorf International GmbH
Contents
Manufacturers Certification................1
Tested Safety ...............................1
FCC-Class A Declaration .........................1
Important notes ..............................2
Introduction ........................4
About this manual .............................5
Care of the BEETLE /XS .........................5
Recycling the BEETLE /XS ........................6
Warranty..................................7
BEETLE /XS ........................8
Overview .................................8
BEETLE /XS Peripherals........................9
BEETLE /XS in a network.......................10
Before switching on the System .....................11
Unpacking and checking the System .................11
Setting up the device .........................11
Cabling of the BEETLE /XS ......................11
Disconnecting cables .........................12
Mounting the cable cover .......................13
Connecting to the mains power supply ................14
Basic settings .............................15
Adjusting the system loudspeaker ..................15
Light emitting diode (LED) ......................15
Connecting peripherals .........................15
Keyboard (KYBD)...........................16
COM1* and COM2* ..........................16
Monitor ................................17
TFT - LCD display...........................17
Dual screen ..............................17
Network ................................18
Modular printers ...........................18
USB (Universal Serial Bus) .....................18
BEETLE /XS - the components .............19
Overview .................................19
Configuration variants ..................21
Submodules for the CPU.........................21
POS Board ..............................21
LAN Adapter 10/100 MBit.......................21
PCI/ Mini PCI Adapter with WLAN Modul ...............21
PCI CRT Controller (Dual Screen) ..................21
CRT- or TFT-adapter .........................21
Installing the submodules when using a TFT/CRT adapter......23
Installing the submodules .......................24
Change of the hard disk .........................25
Retail Software ......................26
Wincor Nixdorf store solutions ......................26
Platforms and products .........................27
Microsoft ...............................27
Linux .................................28
Technology evaluation ........................28
Start and runup behaviour................29
Appendix .........................31
Technical data for the BEETLE /XS ...................31
Installation BA7x on BEETLE /XS ....................32
Supplement ..............................35
Glossary .................................36
Abbreviations...............................38
Manufacturers Certification
The device complies with the requirements of the EEC
directive 89/336/EEC with regard to ‘Electromagnetic
compatibility" and 73/23/ECC “Low Voltage Directive”.
Therefore, you will find the CE mark on the device or packaging.
Tested Safety
The POS system has been provided with the symbol for
“Tested Safety”.
In addition, the BEETLE has received the UL symbol and cUL
symbol.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful inter-ference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense. Modifications not authorized by the
manufacturer may void users authority to operate this device. This class A
digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003
du Canada.
1
TESTED SAFETY
geprüfte
Sicherheit
Important notes
The modular POS system BEETLE /XS conforms to the current safety
standards for data processing equipment.
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry before
being put into service; an acclimatization period of at least two hours must
therefore be observed.
n
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
n
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
n
To disconnect the device from the supply voltage completely, switch off
the device and disconnect the power plug.
n
Ensure that no foreign objects (c.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
n
Never plug in or unplug data communication lines during
thunderstorms.
n
Protect devices from vibrations, dust, moisture and heat.
n
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
n
The lithium battery must be disposed of in accordance with local
regulations for special waste.
n
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off immediately, the power plug disconnected and the Customer
Service of Wincor Nixdorf (WN) or your dealer must be notified.
n
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs
may not only seriously jeopardize the safety of the user, but also cancel
all warranty and liability agreements.
IMPORTANT NOTES
2
n
You should connect your BEETLE or other IT-devices only to power
supply systems with serarately guided protective earth conductor (PE).
This kind of electricity system is known as TN-S network. Do not use
PEN conductors!
n
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3. Thus, you can
help to avoid possible malfunctions.
3
IMPORTANT NOTES
Introduction
The BEETLE /XS is the compact, powerful and economical basis for your
POS system.
The BEETLE conforms to the PC industry standard. Powerful processors
ensure a quick processing of all operations.
You can connect a variety of different peripheral devices to your BEETLE
and even the choice of the software is not limited to a certain product.
This provides you with a considerable degree of flexibility when arranging
the configuration of your POS system.
Optionally the BEETLE /XS can be equipped with a RF-LAN adapter.
Whatever configuration you need: Wincor Nixdorf offers the right solution.
So, whenever you want to expand your BEETLE /XS, please contact your
Wincor Nixdorf branch office or your dealer.
INTRODUCTION
4
About this manual
This manual describes the modular POS system BEETLE /XS.
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents helps you
find the desired information quickly and easily.
The first section describes
n
everything you need to do before switching on the POS system and
how to connect peripherals to the BEETLE /XS.
The second section contains
n
a brief overview of the components of your BEETLE POS system.
The third section provides
n
a brief overview of the Wincor Nixdorf Retail Software.
The Appendix
n
contains the most important technical data, a glossary and a list of
abbreviations.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
Separate manuals are included in the scope of the connectable peripherals.
For this reason, a more detailed description of these devices will not be
provided here. For more information see the relevant manuals.
Care of the BEETLE /XS
Clean your BEETLE /XS at regular intervals with a suitable plastic-surface
cleaner. Make sure that the power plug is disconnected, connector cables
are unplugged and that no liquid finds its way into the device.
5
ABOUT THIS MANUAL
Recycling the BEETLE /XS
Environmental protection does not begin when
it comes time to dispose of the BEETLE; it
begins with the manufacturer. This product was
designed according to our internal norm
“Environmental conscious product design and
development”
The modular BEETLE /XS POS System is manufactured without the use of
CFCs and CCHS and is produced mainly from reusable components and
materials.
The processed plastics can, for the most part, be recycled. Even the
precious metals can be recovered, thus saving energy and costly raw
materials.
Please do not stick labels onto plastic case parts. This would help us to
re-use components and material.
You can protect our environment by switching on your equipment only when
it is actually needed. If possible, even avoid the stand-by-mode as this
wastes energy, too. Also switch your equipment off when you take a longer
break or finish your work.
There are still some parts that are not reusable. Wincor Nlxdorf guarantees
the environmentally safe disposal of these parts in a Recycling Center,
which is certified pursuant to ISO 9001.
So don’t simply throw your BEETLE POS system on the scrap heap when it
has served its time, but take advantage of the environmentally smart,
up-to-date recycling methods!
Please contact your competent branch office for information on how to
return and re-use devices and disposable materials.
RECYCLING THE BEETLE /XS
6
Warranty
Wincor Nixdorf guarantees generally a warranty engagement for 12 months
beginning with the date of delivery. This warranty engagement covers all
those damages which occur despite a normal use of the product.
Damages because of
n
improper or insufficient maintenance,
n
improper use of the product or unauthorized modifications of the
product,
n
inadequate location or surroundings
will not be covered by the warranty.
All parts of the product which are subject to wear and tear are not included
in the warranty engagement.
Please order spare parts at the Wincor Nixdorf customer service.
7
WARRANTY
BEETLE /XS
Overview
You can connect a variety of peripherals to your modular POS system
BEETLE /XS and thus implement a wide range of expansion stages. You
can connect a two or four-line alphanumeric customer display and a four
line cashier display. Alternatively you can connect Flat screens, such as
BA72 and BA73, use various types of scanners such as distance, touch or
stationary scanners, use scales and scanner scales (please take into
account the official certification regulations), connect various printers, use
POS keyboards with or without a swipecard reader, use different types of
cash drawers, connect a monitor,install the POS workplace SNIkey,
integrate the BEETLE /XS in a network.
This means that the BEETLE /XS can meet your requirements at all times,
without having to exchange the complete system for a new one, thus saving
you time and money.
The illustration below show you how your modular POS system can grow from a scanner to integration in a network.
OVERVIEW
8
BEETLE /XS Peripherals
9
OVERVIEW
PrinterScanner
Cash drawer
Scales
Monitor
Flatscreen
display
Keyboard
Customer or cashier display
SNIkey
Loading...