Wincor Nixdorf BEETLE /S-II plus User Manual
BEETLE /S-II plus
(D425- Mot her bo ard)
Modular POS System
User Manual
Your opinion:
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Wincor Nixdorf International GmbH
Documentation RD HWD01
Rohrdamm 7
D-13629 Berlin
E-Mail: retail.documentation@wincor-nixdorf.com
Order No.: 01750220413A
BEETLE /S-II plus
(D425 Motherboard)
Modular POS System
User Manual, Edition June 2011
Co py right© Win cor Nix dorf In ter na tio nal GmbH, 2011
The re pro duc ti on, trans mis si on or use of this do cu ment or its con tents is not
per mit ted wit hout ex press aut ho ri ty.
Of fen ders will be li ab le for da ma ges.
All rights, in clu ding rights crea ted by pa tent grant or re gi stra ti on of a uti li ty
mo del or de sign, are re ser ved.
De li very sub ject to avai la bi li ty; tech ni cal mo di fi ca tions pos si ble.
All brand and pro duct na mes men tio ned in this do cu ment are tra de marks of
their re spec ti ve owners.
Contents
Ma nu fac tu rer´s Cer ti fi ca ti on...............................................1
Tes ted Sa fe ty..............................................................................................1
FCC-Class A De cla ra ti on............................................................................1
Im por tant no tes...........................................................................................1
In tro duc ti on..........................................................................4
About this ma nu al.......................................................................................5
Care of the BEET LE /S-II plus ....................................................................5
Re cy cling the BEET LE /S-II plus ................................................................6
War ran ty.....................................................................................................7
BEET LE /S-II plus- the POS Sys tem...................................8
Over view.....................................................................................................8
Be fo re swit ching on the Sys tem..................................................................9
Un pa cking and che cking the Sys tem ....................................................9
Set ting up the de vi ce.............................................................................9
Cab ling of the BEET LE /S-II plus..............................................................12
Ba sic set tings............................................................................................13
The Sys tem BEET LE /S-II plus .........................................14
Front Side View.........................................................................................14
ON But ton ...........................................................................................15
Light-emit ting Di ode (LED)..................................................................15
USB (Uni ver sal Se ri al Bus)- A, USB 2.0 .............................................15
In te ri or view...............................................................................................16
Po wer Supp ly.....................................................................17
Con nec tor Pa nel .......................................................................................17
Po wer In put.........................................................................................18
Mo du lar Prin ter (DC24V).....................................................................18
Cash Dra wer (CASHDR, RJ12)...........................................................18
Sys tem Unit........................................................................20
D- Sub- Jack, po wer supp lied (COM2*- COM5*) ......................................21
USB (Uni ver sal Se ri al Bus)- A, USB 2.0...................................................21
Mini-DIN (KYBD).......................................................................................21
D- Sub Plug (COM1).................................................................................21
Jack Plug 3.5 mm (IN, OUT, MIC)............................................................22
D- Sub, 25 pin (LPT1, Mo du lar Prin ter).....................................................22
D- Sub, 15 pin (VGA)................................................................................22
LAN (RJ45)...............................................................................................22
Dis con nec ting ca bles........................................................23
Sto ra ge Me dia....................................................................25
Chan ge of the Data Sto re .........................................................................25
P- USB- Hub (op tio nal)......................................................29
COM6*, COM7*- In ter fa ces (op tio nal)...............................30
Star ting up the sys tem......................................................31
Ap pen dix............................................................................33
Tech ni cal Data BEET LE /S-II plus............................................................33
In ter fa ces..................................................................................................34
To tal Cur rent Con sump ti on Of In ter fa ces .................................................35
Glos sa ry....................................................................................................36
Ab bre via tions............................................................................................38
Manufacturer´s Certification
The de vi ce com plies with the re qui re ments of the EEC
di rec ti ve 2004/108/EC with re gard to ‘Electromagnetic
com pa ti bi li ty" and 2006/95/EG “Low Vol ta ge Directive”.
Therefore, you will find the CE mark on the device or packaging.
Tested Safety
The BEET LE has re cei ved the UL sym bol and cUL
sym bol.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful inter-ference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense. Modifications not authorized by the
manufacturer may void users authority to operate this device. This class A
digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003
du Canada.
Important notes
The mo du lar POS sys tem BEETLE /S-II plus con forms to the cur rent sa fe ty
stan dards for data pro ces sing equip ment.
BEETLE /S-II plus 1
n
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device mus t be absolutely dry
before being put into service; an acclimatization period of at least two
hours must therefore be observed.
n
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
n
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
n
To disconnect the device from the supply voltage completely, switch off
the device and disconnect the power plug of the power supply.
n
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
n
Never plug in or unplug data communication lines during thunderstorms.
n
Protect devices from vibrations, dust, moisture and heat.
n
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
n
The ventilation slots must remain unobstructed to ensure sufficient
ventilation of the equipment. If the equipment is to be fitted, you must
ensure that the specified minimum distances are maintained and constant
ventilation is provided.
n
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service of
Wincor Nixdorf or your dealer must be notified.
n
The li thi um bat te ry must be dis po sed of in ac cor dan ce with lo cal
re gu la tions for spe ci al was te. In case of an im pro per chan ge of the
li thi um bat te ry there is an explosion risk. Exchange of batteries only by
aut ho ri zed qua li fied service per son nel!
n
The de vi ce may only be re pai red by aut ho ri zed qua li fied per son nel.
Un aut ho ri zed ope ning of the de vi ce and in ex pert ly car ried-out re pairs may
not only se ri ous ly jeo par di ze the sa fe ty of the user, but also can cel all
war ran ty and liability agreements.
2 BEETLE /S-II plus
n
Your BEETLE sys tem is the re sult of mo dern tech ni cal in no vat ion. So
plea se see for ac cor ding struc tu ral and tech ni cal sur roun dings to
gua ran tee a fault less and ef fi cient work of your BEETLE. The re fo re, you
should con nect your BEETLE or ot her IT-de vi ces only to po wer supp ly
sys tems with se pa ra te ly gui ded pro tec ti ve earth con duc tor (PE). This kind
of elec tri ci ty sys tem is known as TN-S net work. Do not use PEN
conductors!
Plea se also ob ser ve the re com men da tions of the norm DIN VDE 0100,
Part 540, Ap pen dix C2 as well as EN50174-2, §5.4.3.Thus you can help
to avoid pos si ble mal functions.
n
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org. Other peripheral devices with higher power
requirement (such as PoweredUSB printer) must be connected to or
disconnected from your BEETLE system only after the BEETLE has been
switched off.
BEETLE /S-II plus 3
Introduction
The BEETLE /S-II plus is the powerful POS System for multi-functional
solutions. This entry level POS system unit with low power, state-of-the-art
Intel Atom™ processor technology provides a basis for all of today’s and
future POS store and back office solutions.
The BEETLE /S-II plus features numerous standard PC and
retail-specific powered interfaces for connection of peripheral devices.
Additional USB ports are accessible from the front for greater
convenience. The type and number of interfaces can be customized
very flexibly.
The BEETLE /S-II plus uses cutting-edge Intel processors that offer
better performance yet consume more than 30 % lesspower than those
of previous generations. The power supply unit complies with the strict
80 PLUS Bronze supply standard, operating with a constant energy
efficiency of over 82 %.
The addition of a powered interfaces for peripherals, power-saving functions
in the BIOS and operating system results in a marked reduction in power
consumption and the resulting CO2 emissions. These technologies enable
you not only to protect the environment but also to reduce running costs
and total cost of ownership.
Whatever configuration you need: Wincor Nixdorf International GmbH offers
a suitable solution. If you want to know more about our products visit us on
Internet:
http://www.wincor-nixdorf.com/internet/site_EN/EN/Home/homepage_node.
html
4 BEETLE /S-II plus
About this manual
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents help you
find the desired information quickly and easily.
No tes in the ma nu al are mar ked by this sym bol.
This symbol is used for war nings.
The type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
You will find a description of the BIOS Setup and the Central Processing
Unit in a separate manual (“POS Motherboard”), see:
http://www.wincor-nixdorf.com/internet/us/Services/Support/TechnicalSuppo
rt/POSSystems/index.html.
Care of the BEETLE /S-II plus
Clean your BEETLE /S-II plus at regular intervals with a suitable
plastic-surface cleaner which can be ordered from Wincor Nixdorf
International GmbH. Make sure that the power plug is disconnected
and that no liquid finds its way into the device.
BEETLE /S-II plus 5
Recycling the BEETLE /S-II plus
En vi ron men tal pro tec ti on does not be gin
when the time has come to dis po se of
the BEET LE; it be gins with the
ma nu fac tu rer. This pro duct was
de sig ned ac cor ding to our in ter nal norm
“En vi ron men tal cons ci ous pro duct
de sign and de ve lop ment”.
The modular BEETLE /S-II plus system is manufactured without the use of
CFCs and CCHS and is produced mainly from reusable components and
materials.
The processed plastics can, for the most part, be recycled. Even the
precious metals can be recovered, thus saving energy and costly raw
materials.
Please do not stick labels onto plastic case parts. This would help us to
re-use components and material.
At this time, there are still some parts that are not reusable. Wincor Nixdorf
International GmbH guarantees the environmentally safe disposal of these
parts in a Recycling Center, which is certified pursuant to ISO 9001 and
ISO 14001.
So don’t discard your BEETLE /S-II plus system on the garbage when it has
served its time, but take advantage of the environmentally smart, up-to-date
recycling methods!
Plea se con tact your com pe tent branch or the Re cy cling Cen ter Pa der born
(for Eu ro pe an coun tries) for in for ma ti on on how to re turn and re-use de vi ces
and dis po sa ble ma ter ials un der the following mail address.
Email: info@wincor-nixdorf.com
or on the internet.
We look for ward to your mail.
6 BEETLE /S-II plus
Warranty
Generally, Win cor Nix dorf gua ran tees a war ran ty en ga ge ment for twelve
months be gin ning with the date of de li very. This war ran ty en ga ge ment
co vers all da ma ges which oc cur de spi te a nor mal use of the pro duct.
Da ma ges be cau se of
n
im pro per or in suf fi cient care or main ten an ce,
n
im pro per use of the pro duct or un aut ho ri zed mo di fi ca tions of the pro duct,
n
ina de qua te lo ca ti on or sur roun dings
will not be co ver ed by the war ran ty.
For furt her in for ma ti on on the sti pu la ti on consult your con tract.
All parts of the pro duct which are sub ject to wear and tear (e.g. batteries)
are not in clu ded in the war ran ty en ga ge ment. For detailed warranty
arrangements please consult your contract documents.
Plea se or der spa re parts at the Win cor Nix dorf cus to mer ser vi ce.
BEETLE /S-II plus 7
BEETLE /S-II plus- the POS System
Overview
You can connect a variety of peripherals to your modular POS system
BEETLE /S-II plus and thus impl ement a wide range of expansion st ages.
You can connect a four-line alphanumeric customer display and a four
line cashier display. Alternatively, you can connect flat screens.
You can
n
use various types of bar code scanners such as distance, touch or
stationary scanners,
n
use scales and scanner scales (please take into account the official
certification regulations),
n
connect various printers,
n
use POS keyboards,
n
use different types of cash drawers,
n
integrate the BEETLE /S-II plus in a network and
n
upgrade the BEETLE /S-II plus, since it can accommodate one expansion
card (1x PCI).
This means that the BEETLE /S-II plus can meet your requirements at all
times, without having to exchange the complete system for a new one.
8 BEETLE /S-II plus
Loading...