Wincor Nixdorf BEETLE /M-III User Manual
BEETLE /M-III
Modular POS System
User Guide
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Wincor Nixdorf International GmbH
Documentation R&D SAT36
Wohlrabedamm 31
D-13629 Berlin
E-Mail: retail.documentation@wincor-nixdorf.com
Order No.: 01750262070A
Your opinion:
BEETLE /M-III
Modular POS System
(K1/K2- Motherboard, 80-Plus Gold Power Supply)
User Manual
Edition July 2014
All brand and product names mentioned in this document are trademarks of their respective owners.
Copyright © Wincor Nixdorf International GmbH, 2014
The reproduction, transmission or use of this document or its contents is not permitted without
express authority. Offenders will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical
modifications possible.
Contents
Manufacturer´s Certification .......................................................... 1
Tested Safety ..................................................................................... 1
FCC-Class A Declaration ..................................................................... 1
Safety Notes ....................................................................................... 1
Important Notes ................................................................................ 2
Introduction ................................................................................... 4
About This Manual ............................................................................. 4
Care Of the BEETLE /M-III .................................................................. 5
Recycling the BEETLE /M-III ............................................................... 5
Warranty ............................................................................................ 6
BEETLE /M-III - The Modular POS System ....................................... 7
Overview ............................................................................................ 7
Before Switching On the System .................................................... 8
Unpacking And Checking the System ................................................. 8
Setting Up the Device ........................................................................ 9
Horizontal Installation ................................................................... 9
Vertical Installation Of the Equipment .......................................... 9
Mounting the Cable Cover ............................................................... 10
Cabling Of the BEETLE /M-III ........................................................ 12
Basic Settings ................................................................................... 13
The System BEETLE /M-III ............................................................ 14
Front Side View ................................................................................ 14
Power Button .............................................................................. 14
Light-Emitting Diode (LED) .......................................................... 15
USB (Universal Serial Bus)- A, USB 2.0 ......................................... 15
Interior View .................................................................................... 16
Connector Panel ........................................................................... 17
Power Supply ................................................................................... 17
PoweredUSB ................................................................................ 18
RJ12 (CASHDR) ............................................................................. 18
Power Connector ......................................................................... 18
System Unit ...................................................................................... 19
D- Sub- Socket Power Supplied (COM2*-COM4*) ....................... 20
Display 1 oder 2 ........................................................................... 20
D- Sub Plug (COM1) ..................................................................... 20
Mini D-sub connector (VGA) ........................................................ 20
Mini- DIN (KYBD) .......................................................................... 21
USB (Universal Serial Bus) A 2.0, 3.0............................................ 21
RJ45 (LAN) .................................................................................... 21
Jack Plug 3.5 mm (In/Out/Microphone) ...................................... 22
PoweredUSB ................................................................................ 22
Disconnecting Cables .................................................................... 23
Opening BEETLE /M-III ................................................................. 25
Storage Media .............................................................................. 27
Change of one 3.5” Data Store ......................................................... 27
Change of one or two 2.5” Data Store/s .......................................... 29
Change of one or two 2.5” Data Store/s with Frontal Disk Access .. 32
PoweredUSB- Hub (optional) ....................................................... 35
COM5
(*)
-COM6
(*)
- Interfaces (optional) ........................................ 36
Changing RAM Module ................................................................. 37
Starting Up the System ................................................................. 39
Appendix ...................................................................................... 41
Technical Data BEETLE /M-III ........................................................... 41
Interfaces ......................................................................................... 42
Total Current Consumption of Interfaces ........................................ 43
Abbreviations ............................................................................... 44
BEETLE /M-III User Manual 1
Manufacturer´s Certification
The device complies with the requirements of the
EC directive 2004/108/EC with regard to ‘Electro- magnetic compatibility" and 2006/95/EC “Low Voltage
Directive” and RoHS 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
Tested Safety
The BEETLE has received the UL symbol and cUL
symbol.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Modifications not authorized by the manufacturer may void users authority to operate this device.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003
du Canada.
Safety Notes
The device may only be repaired by authorized qualified personnel. Unauthorized opening of the device and inexpertly carried-out
repairs may not only seriously jeopardize the safety of the user,
but also cancel all warranty and liability agreements.
2 BEETLE /M-III User Manual
Expansion cards with electrostatically sensitive devices (ESD) may
be marked with this sticker.
Opening the device or handling boards fitted with ESDs, you must observe
the following aspects under all circumstances:
You must always discharge yourself (e. g. by touching a grounded
object) before working with boards containing ESDs.
The equipment and tools you use must be free of static charges.
Pull out the power plug before inserting or pulling out board
containing ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
Important Notes
The modular POS system BEETLE /M-III conforms to the current safety
standards for data processing equipment.
If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be absolutely dry before being put into service; an acclimatization period of at
least two hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the de-
vice and the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the power supply.
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications according to usb.org. Other peripheral devices (such as PoweredUSB
printer) should be connected to or disconnected from your BEETLE system only after the BEETLE has been switched off.
BEETLE /M-III User Manual 3
Before you begin an installation on the device, you should static
discharge, for example, by touching a grounded object (such as
heating).
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
Never plug in or unplug data communication lines during thunder-
storms.
Protect the device from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
The ventilation slots of the power supply must remain unobstructed to
ensure sufficient ventilation of the equipment. If the equipment is to
be fitted, you must ensure that the specified minimum distances are
maintained and constant ventilation is provided.
In emergencies (e.g. damaged housing or damaged power cable, pene-
tration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service
of Wincor Nixdorf or your dealer must be notified.
The lithium battery must be disposed of in accordance with local regu-
lations for special waste. In case of an improper change of the lithium
battery it exist an explosion risk.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs
may not only seriously jeopardize the safety of the user, but also
cancel all warranty and liability agreements.
Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guarantee a fault less and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3. Thus you can help
to avoid possible malfunctions.
4 BEETLE /M-III User Manual
Introduction
The BEETLE /M-III is the powerful, high performance POS system for multifunctional solutions. A powerful and energy-efficient processor technology
ensures a quick processing of all operations.
The BEETLE / M-III contributes particularly to energy saving and environmental protection by using a 80-Plus gold power supply.
The Power Supply Unit (PSU) carries the 80plus Gold certificate.
So, less energy is needed and less noise is generated as the fan is
much lesser activated with a low revolution speed.
The BEETLE /M-III boasts a wide range of standard PC and retail-specific
powered interfaces to connect the numerous peripherals. Additional USB
ports are accessible from the front to provide even more convenience. The
type and number of interfaces can be customized very flexibly.
Optionally there is a second SATA Hard Disk Drive available for your
BEETLE /M-III. The choice of the software is not limited to a certain
product. This provides you with a considerable degree of flexibility when
arranging the configuration of your POS system.
Whatever configuration you need: Wincor Nixdorf International GmbH
offers the right solution. So, whenever you want to expand your
BEETLE /M-III, please contact your Wincor Nixdorf International GmbH
branch office or your dealer (
http://www.wincor-
nixdorf.com/internet/site_EN/EN/Home/homepage_node.html )
About This Manual
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents help you
find the desired information quickly and easily.
Notes in the manual are marked by this symbol.
BEETLE /M-III User Manual 5
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s
own selection; therefore, software will not be discussed further in this
manual.
For the peripheral devices of the BEETLE /M-III you can find detailed information in the respective manuals.
See
http://www.wincor-nixdorf.com/internet/site_EN//EN/Support/
Downloads/POSLotterySystems/Manuals/manuals_node.html
Care Of the BEETLE /M-III
Clean your BEETLE /M-III at regular intervals with a dry, lint-free cloth. If
that does not suffice please use a suitable plastic-surface cleaner which
can be ordered from Wincor Nixdorf International GmbH. Make sure that
the power plug is disconnected and that no liquid finds its way into the device.
Recycling the BEETLE /M-III
Environmental protection does not begin when the time has come to dispose of the BEETLE; it begins with the manufacturer. This product was designed according to our internal norm “Environmental conscious product
design and development”.
The modular BEETLE /M-III system is manufactured without the use of CFC
and CHC and is produced mainly from reusable components and
materials.
Please do not stick labels onto plastic case parts. This would help us to reuse components and material. At the moment, there are still some parts
that are not reusable. Wincor Nixdorf International GmbH guarantees the
environmentally safe disposal of these parts in a Recycling Center, which is
certified pursuant to ISO 9001 and ISO 14001.
So, when your BEETLE /M-III it has served its time take advantage of the
environmentally smart, up-to-date recycling methods!
6 BEETLE /M-III User Manual
Please contact your competent branch or the Recycling Center Paderborn
(for European countries) for information on how to return and re-use devices and disposable materials under the following mail address.
Email: info@wincor-nixdorf.com
We look forward to your mail.
Warranty
Generally, Wincor Nixdorf guarantees a warranty engagement for 12
months beginning with the date of delivery. This warranty engagement
covers all damages which occur despite a normal use of the product.
Damages because of
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the
product,
inadequate location or surroundings
will not be covered by the warranty.
For further information on the stipulation consult your contract.
All parts of the product which are subject to wear and tear are not included in the warranty engagement. For detailed warranty arrangements
please consult your contract documents.
Please order spare parts at the Wincor Nixdorf customer service.
BEETLE /M-III User Manual 7
BEETLE /M-III - The Modular POS System
Overview
You can connect a variety of peripherals to your modular POS system
BEETLE /M-III and thus implement a wide range of expansion stages.
You can
use various types of scanners such as distance, touch or stationary
scanners,
use scales and scanner scales (please take into account the official
certification regulations),
connect various printers,
use POS workplaces with various screen displays
use different types of cash drawers,
use POS keyboards,
integrate the BEETLE /M-III in a network and
upgrade the BEETLE /M-III, since it can accommodate expansion cards
(1x PCI Express x1 + 1x PCI-Express x16).
This means that the BEETLE /M-III can meet your requirements at all times.
8 BEETLE /M-III User Manual
Before Switching On the System
Unpacking And Checking the System
Unpack the components and verify that the scope of delivery is identical to
the information on the delivery ticket.
The carton contains the basic unit and a country-specific accessories kit.
Some ordered composition may be installed.
Should you notice any transport damages or discrepancies between package contents and delivery ticket or functional defects please inform your
contracting parties or the branch office of Wincor Nixdorf immediately.
Please indicate the number of your delivery ticket and delivery ticket position and serial numbers of the respective devices.
The serial number can be found on the label illustrated below (sample).
The label is located at the bottom side of the housing.
Serial number
Transport the device only in its original packaging (to protect it against
impact and shock).
BEETLE /M-III User Manual 9
Setting Up the Device
Set up the BEETLE /M-III system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust,
moisture, heat and strong magnetic fields.
Horizontal Installation
Mind the minimum distances indicated below! If the equipment is to be
fitted, you also must ensure that the specified minimum distances are
maintained and constant ventilation is provided. The immediate ambient
temperature of the system must not exceed 40 °C (104 °F).
Find four feet covered by a non-skid rubber foil at the rear side of the
BEETLE.
Vertical Installation Of the Equipment
Mind the following minimum clearances also for vertical mounting to
ensure sufficient ventilation:
Backward: 60 mm
Forward: 50 mm
You can position the device at the right or left side.
60 mm
50 mm
10 BEETLE /M-III User Manual
Mounting the Cable Cover
Before mounting the optional cable cover, you should first remove the
cable openings where necessary. This depends on the cables which you
wish to lay. Tools are not required as the plastic parts can be removed by
hand.
To mount the cover, insert the two bars into the tabs on the back side of
the BEETLE.
tabs
Loading...