Wincor Nixdorf Beetle /i8A Operating Manual
/i8A Mo
dular POS System
Operating Manual
BEET
LE
Global Vision Co., Ltd.
www.globalvision.com.vn
Li
nux™ is a registered trademark of Linus Torvalds
Pentium™ is a registered trademark of the Intel Corporation
MS-DOS™, Windows 95™, Windows 98™, Windows NT™, Windows 2000™,
Windows XP™ and Windows CE™ are registered trademarks of the Microsoft Corporation
BEETLE™ is a registered trademark of Wincor Nixdorf GmbH
Th
e reproduction, transmission or use of this document or its contents is not
permitted without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or
design, are reserved.
Delivery subject to availability; technical modifications possible.
Copyright© Wincor Nixdorf International GmbH, 2011
Global Vision Co., Ltd.
www.globalvision.com.vn
BEE
TLE /i8A
Modular POS System
Operating Manual
Edition Feb 2011
Global Vision Co., Ltd.
www.globalvision.com.vn
Co
ntents
BEETLE /i8A POS System – Operating Manual 01750185706 D
Cont
ents
MANUFACTURERS CERTIFICATION AND NOTES......................................1
TESTED SAFETY..............................................................................................1
FCC-CLASS A DECLARATION...........................................................................1
BSMI (EMC FOR TAIWAN)...............................................................................2
IMPORTANT NOTES ..........................................................................................3
POWER CORD SELECTION ...............................................................................4
INTRODUCTION..............................................................................................5
ABOUT THIS MANUAL........................................................................................5
CARE OF THE BEETLE /I8A...............................................................................7
RECYCLING THE BEETLE /I8A...........................................................................7
WARRANTY.....................................................................................................8
BEETLE /I8A – THE MODULAR POS SYSTEM................................ .............9
OVERVIEW......................................................................................................9
BEFORE SWITCHING ON THE SYSTEM.....................................................10
UNPACKING AND CHECKING THE SYSTEM........................................................10
SETTING UP THE DEVICE ................................................................................11
Horizontal installation ..............................................................................11
Vertical installation of the equipment.......................................................11
CABLING OF THE BEETLE /I8A ........................................................................13
BASIC SETTINGS............................................................................................14
REPLACING THE LITHIUM BATTERY .................................................................15
THE SYSTEM BEETLE /I8A..........................................................................17
FRONT SIDE VIEW..........................................................................................17
ON Button................................................................................................18
Light-emitting Diode (LED)......................................................................18
USB (Universal Serial Bus) - A, USB 2.0.................................................18
INTERIOR VIEW..............................................................................................19
POWER SUPPLY...........................................................................................20
Power Input .............................................................................................21
DC24V (Modular Printer).........................................................................22
POWER CONSUMPTION ................................ ..................................................23
SYSTEM UNIT................................................................................................24
Global Vision Co., Ltd.
www.globalvision.com.vn
Co
ntents
0175018570
6 D BEETLE /i8A POS System – Operating Manual
AUDI
O (MIC, LINE-OUT).................................................................................25
MINI-DIN (KEYBOARD & MOUSE) ...................................................................25
DSUB PLUG (COM1)....................................................................................25
DSUB JACK POWERED (COM2*/COM3*/COM4*)..........................................25
USB (UNIVERSAL SERIAL BUS)-A, USB 2.0....................................................26
RJ45 (LAN)..................................................................................................26
CRT.............................................................................................................26
12V DC JACK ...............................................................................................27
4-PIN 12V LCD OUT......................................................................................27
DISCONNECTING CABLES..........................................................................28
STORAGE MEDIA .........................................................................................31
CHANGE OF THE HARD DISK DRIVE ................................................................31
OPTIONAL ADD-ON......................................................................................36
POWERED USB HUB .....................................................................................37
POWERED COM HUB - COM5*,6*,7*.............................................................38
STARTING UP THE SYSTEM .......................................................................39
START AND RUNUP BEHAVIOUR.......................................................................39
APPENDIX .....................................................................................................41
TECHNICAL DATA FOR THE BEETLE /I8A..........................................................41
INTERFACES..................................................................................................42
REAR I/O CONFIGURATIONS...........................................................................43
Basic........................................................................................................43
with Powered USB Hub...........................................................................43
with Powered COM Hub..........................................................................44
TOTAL CURRENT CONSUMPTION OF INTERFACES............................................45
MOTHERBOARD CONNECTORS .......................................................................46
GLOSSARY....................................................................................................47
ABBREVIATIONS ............................................................................................49
Global Vision Co., Ltd.
www.globalvision.com.vn
Ma
nufacturers Certification and notes
1
BEETLE /i8A POS System – Operating Manual 01750185706 D
Man
ufacturers Certification and notes
Tested Safety
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not in-stalled and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Le présent appareil numérique ne génère pas de bruits radioélectriques
dépassant les limites applicable aux appareils numériques de la “Class A”
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
Th
e device complies with the requirements of the EEC directive
2004/108/EC with regard to ‘Electromagnetic compatibility" and
2006/95/EC “Low Voltage Directive”.
In
addition, the BEETLE has received the UL symbol and cUL symbol.
Global Vision Co., Ltd.
www.globalvision.com.vn
Ma
nufacturers Certification and notes
0175018570
6 D BEETLE /i8A POS System – Operating Manual 2
BS
MI (EMC for Taiwan)
Th
e device complies with the requirements of the BSMI (Bureau of
Standards, Metrology and Inspection, Ministry of Economic Affairs)
directive CNS14348 with regard to “Electromagnetic compatibility” with
the limits for a Class A product.
Global Vision Co., Ltd.
www.globalvision.com.vn
Ma
nufacturers Certification and notes
3
BEETLE /i8A POS System – Operating Manual 01750185706 D
Im
portant notes
The Modular POS system BEETLE /i8A conform to the current safety standards
for data processing equipment.
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry before
being put into service; an acclimatization period of at least two hours must
therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off the
device and disconnect the power plug.
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
Never plug in or unplug data communication lines during thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally safe
manner.
The lithium battery must be disposed of in accordance with local regulations
for special waste.
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service of
Wincor Nixdorf (WN) or your dealer must be notified.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may
not only seriously jeopardize the safety of the user, but also cancel all
warranty and liability agreements.
Global Vision Co., Ltd.
www.globalvision.com.vn
Ma
nufacturers Certification and notes
0175018570
6 D BEETLE /i8A POS System – Operating Manual 4
You
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This kind
of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100, Part
540, Appendix C2 as well as EN50174-2, §5.4.3. Thus, you can help to
avoid possible malfunctions.
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org
.
Oth
er peripheral devices with higher power requirement (such as Powered
USB printer) should be connected to or disconnected from your BEETLE
system only after the BEETLE has been switched off.
Power Cord Selection
If power cord is not provided with the display, user has to ensure that a
certified power cord is used as required by the Safety Regulation of the
country.
Countries Safety Approvals
USA UL
Canad
a CSA
Ge
rmany VDE
Japan PSE
Ta
iwan BSMI
Chin
a CCC
Fo
r other countries not mentioned in the above list, please check with
the local authority.
Global Vision Co., Ltd.
www.globalvision.com.vn
In
troduction
5
BEETLE /i8A POS System – Operating Manual 01750185706 D
Intro
duction
The BEETLE /i8A is a low-cost low power POS system that can deliver the
necessary performance for the POS application. The system features an
INTEL 45nm mobile processor with excellent performance/price and
performance/power ratios that promise to lower the total cost of ownership.
About this manual
This manual describes the Modular POS system BEETLE /i8A.
This documentation is intended to help you to work with the POS system and to
serve as a reference work. The detailed table of contents helps you find the
desired information quickly and easily.
Notes call attention to important information.
Cautions are included to help you avoid damaging
hardware or losing data.
Warnings indicate conditions that, if not observed, can
cause personal injury.
! CAU
TION
! WA
RNING
NOT
E
Global Vision Co., Ltd.
www.globalvision.com.vn
In
troduction
0175018570
6 D BEETLE /i8A POS System – Operating Manual 6
Th
e type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
Separate manuals are included in the scope of the connectable peripherals. For
this reason, a more detailed description of these devices will not be provided
here. For more information see the relevant manuals.
Global Vision Co., Ltd.
www.globalvision.com.vn
In
troduction
7
BEETLE /i8A POS System – Operating Manual 01750185706 D
Ca
re of the BEETLE /i8A
Clean your BEETLE /i8A at regular intervals with a suitable plastic-surface
cleaner. Make sure that the power plug is disconnected, connector cables are
unplugged and that no liquid finds its way into the device. The glass surface of
your Touch Screen should be cleaned with a mild, commercially available glass
cleaning product. All pH neutral materials (pH 6 to 8) are to be used for cleaning
purposes.
Recycling the BEETLE /i8A
The Modular BEETLE /i8A System is manufactured without the use of CFCs and
CCHS and is produced mainly from reusable components and materials.
The processed plastics can, for the most part, be recycled. Even the precious
metals can be recovered, thus saving energy and costly raw materials.
Please do not stick labels onto plastic case parts. This would help us to re-use
components and material.
You can protect our environment by switching on your equipment only when it is
actually needed. If possible, even avoid the stand-by-mode as this wastes
energy, too. Also switch your equipment off when you take a longer break or
finish your work.
There are still some parts that are not reusable. Wincor Nixdorf guarantees the
environmentally safe disposal of these parts in a Recycling Center, which is
certified pursuant to ISO 9001.
Environmental protection does not begin when time comes to
dispose of the BEETLE; it begins with the manufacturer. This
product was designed according to our internal norm
“Environmental conscious product design and development”
! WA
RNING
Global Vision Co., Ltd.
www.globalvision.com.vn
In
troduction
0175018570
6 D BEETLE /i8A POS System – Operating Manual 8
So
don’t simply throw your BEETLE POS system on the scrap heap when it has
served its time, but take advantage of the environmentally smart, up-to-date
recycling methods!
Please contact your competent branch office for information on how to return
and re-use devices and disposable materials.
Wincor Nixdorf is always ready to answer any questions you may have about
our environmental protection policies. We look forward to your message.
Warranty
Wincor Nixdorf guarantees a limited warranty engagement for 12 months
beginning with the date of delivery. This warranty engagement covers all those
damages which occur despite a normal use of the product.
Damages because of
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the product,
inadequate location or surroundings
will not be covered by the warranty.
All parts of the product which are subject to wear and tear are not included in
the warranty engagement.
Please order spare parts at the Wincor Nixdorf customer service.
Global Vision Co., Ltd.
www.globalvision.com.vn
BEE
TLE /i8A – the modular POS System
9
BEETLE /i8A POS System – Operating Manual 01750185706 D
BEE
TLE /i8A – the modular POS System
Overview
You can connect a variety of peripherals to your modular POS system
BEETLE /i8A and thus implement a wide range of expansion stages. You can
connect a 4-line or 2-line alphanumeric customer display and cashier display.
Alternatively, you can connect flat screens.
You can
use various types of scanners such as distance, touch or stationary
scanners,
use scales and scanner scales (please take into account the official
certification regulations),
connect various printers,
use POS keyboards,
use different types of cash drawers (via printer’s cash drawer port)
connect a monitor,
integrate the BEETLE /i8A in a network and
upgrade the BEETLE /i8A, since it can accommodate one PCI card.
This means that the BEETLE /i8A can meet your requirements at all times,
without having to exchange the complete system for a new one, thus saving
you time and money.
Global Vision Co., Ltd.
www.globalvision.com.vn
Be
fore switching on the system
0175018570
6 D BEETLE /i8A POS System – Operating Manual 10
Be
fore switching on the System
Unpacking and checking the System
Unpack the parts and check to see whether the delivery matches the information
on the delivery note.
The carton contains the basic unit and a country-specific accessories kit. Some
ordered composition may be installed.
Should you notice any transport damages or discrepancies between package
contents and delivery ticket or functional defects please inform your contracting
parties or the branch office of Wincor Nixdorf immediately. Please indicate the
number of your delivery ticket and delivery ticket position and serial numbers of
the respective devices.
The serial numbers can be found on the labels which are located at the bottom
side of the housing.
Transport the device only in its original packaging (to protect it against impact
and shock).
NOT
E
Global Vision Co., Ltd.
www.globalvision.com.vn
Be
fore switching on the system
11
BEETLE /i8A POS System – Operating Manual 01750185706 D
Set
ting up the device
Set up the BEETLE/I8A system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust, moisture,
heat and strong magnetic fields.
Make sure that the side ventilation slots on the BEETLE /i8A POS system are
not obstructed in order to ensure that the device has sufficient ventilation.
Horizontal installation
Mind the minimum distances indicated below! If the equipment is to be fitted,
you also must ensure that the specified minimum distances are maintained
and constant ventilation is provided. The immediate ambient temperature of
the system must not exceed 40° C (104° F).
Vertical installation of the equipment
BEETLE /i8A can be vertically mounted seating on the right-side.
The minimum top and bottom distances listed in the figure must be
maintained; otherwise , a su ffi ci en t ven til ati on o f th e eq uip men t i s not
guaranteed.
! CAU
TION
Global Vision Co., Ltd.
www.globalvision.com.vn
Be
fore switching on the system
0175018570
6 D BEETLE /i8A POS System – Operating Manual 12
Th
e BEETLE /i8A is designed for h ori zo nta l m ou nti ng . If y ou install the
BEETLE /i8A in vertical position, you have to pay attention to the following:
Mind the following minimum clearances also for vertical mo unting to
ensure sufficient ventilation:
Right-side mounting
Fr
ont 50 mm
Back 60
mm
Si
de (left) 50 mm
Th
e unit must be secured to the mounting surface by straps or other
mechanical means to prevent it from toppling.
A surface made of nonflammable material (e.g. concrete or metal) must
be located underneath the vertically mounted BEETLE /i8A unit.
50
mm
60
mm
50
mm
Global Vision Co., Ltd.
www.globalvision.com.vn
Loading...