Wincor Nixdorf BA80 Operating Manual
BA80
8.4" TFT LCD Monitor
Operating Manual
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Your opinion:
Wincor Nixdorf International GmbH
Documentation RD HWD01
Rohrdamm 7
D-13629 Berlin
E-Mail: retail.documentation@wincor-nixdorf.com
Order No.: 01750215139C
BA80
8.4” (21,3 cm) TFT LCD Monitor
Operating Manual
Edition December 2011
All brand and product names mentioned in this document are trademarks of their
respective owners.
Copyright © Wincor Nixdorf International GmbH, 2011
The reproduction, transmission or use of this document or its contents is not permitted without
express authority.
Offenders will be liable for damages. All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
Delivery subject to availability; technical modifications possible.
Contents
Contents .........................................................................................................6
Manufacturer’s Declaration and Approval ...................................................1
General Authorization ......................................................................................1
FCC-Class A Declaration .................................................................................1
Tested Safety...................................................................................................1
User Information ..............................................................................................2
Safety Instructions ...........................................................................................2
Cleaning the BA80 ...........................................................................................3
Warranty ..........................................................................................................3
Recycling .........................................................................................................4
Introduction....................................................................................................5
Advantages at a Glance................................................................................... 5
Unpacking and checking the Delivery Unit .......................................................6
BA80 Components.........................................................................................7
Screen Module.................................................................................................7
Dual Display Holder (optional) ......................................................................... 8
Mounting the Tube Adapter..............................................................................9
Installing the Base..........................................................................................10
Table Mounting..........................................................................................13
Ergonomical Adjustment of the BA80.............................................................14
Installation....................................................................................................15
Connecting the VGA cable............................................................................. 15
DC12V INPUT................................................................................................ 15
Push Buttons at the Bottom Side ...................................................................16
Status LED Information..................................................................................16
On Screen Display (OSD)............................................................................ 17
Menu Buttons.................................................................................................17
Main Menu .....................................................................................................18
Auto Adjust ................................................................................................18
Luminance .....................................................................................................18
Submenu Luminance (Brightness) ............................................................19
Submenu Luminance (Contrast)................................................................ 20
Geometry...................................................................................................20
H.Position ..................................................................................................21
V.Position ..................................................................................................21
Pixel Clock................................................................................................. 22
Phase ........................................................................................................22
Color..........................................................................................................23
User Preset ...............................................................................................23
OSD............................................................................................................... 24
H.Position.................................................................................................. 24
V.Position .................................................................................................. 25
OSD Timeout.............................................................................................25
Language....................................................................................................... 26
Recall............................................................................................................. 26
Color Recall............................................................................................... 27
Recall All ................................................................................................... 27
Miscellaneous................................................................................................ 28
Sharpness ................................................................................................. 28
Display Information.................................................................................... 29
EXIT............................................................................................................... 29
Technical Data ............................................................................................. 30
Dimensions .................................................................................................. 31
Manufacturer’s Declaration and Approval
General Authorization
This device fulfills the requirements of Electromagnetic
Compatibility (EEC) standards, 2004/108/EC.
Therefore, you will find the CE mark on the device or
packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful inter-ference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense. Modifications not authorized by the manufacturer may
void users authority to operate this device. This class A digital apparatus
complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à la norme NMB-003 du
Canada.
Tested Safety
The BA80 has been awarded the symbol of CCC (China
Compulsory Certification).
The BA80 has also received the BSMI (Bureau of
Standards, Metrology and Inspection) symbol.
Additionally, the BA80 has also been awarded to cULand UL- symbol.
1
User Information
Wincor Nixdorf (WN) does not accept responsibility for radio and TV interference and faults that care caused by unauthorized changes that have been
made to the devices. Furthermore, cables or other devices that have not
been approved by WN may not be connected to the device. The user is
responsible for any faults and interference that are caused as a result.
Safety Instructions
This device conforms to the corresponding safety regulations for information
technology devices, including electronic office machines for use in the office
environment.
Repair work on the devices should only carried out by
authorized and specially trained personnel. Improper
repairs will lead to the loss of any guarantee and liability
claims.
Extension boards with electro statically endangered
components can be identified with this label.
A certain room lighting is required, if the BA80 is also to
be used as an office terminal. Daylight has proved to be
the best.The brightness of the surrounding area and
brightness of the display screen should approximate.
If the device is moved from a cold environment to a warmer room where
it is to be operated, condensation could occur. The device must be completely dry before being put into operation. Therefore an acclimatization
time of at least two hours should be accounted for.
Lay all cables and supply lines so that nobody can tread on them or trip
over them.
Data cables should neither be connected nor removed during electrical
storms.
Protect the device from vibrations, dust, moisture and heat, and only
transport the device in its original packaging (to protect it against impact
and blows).
Take care to ensure that no foreign objects (e.g. paper clips) or liquids
can get into the inside of the device, as this could cause electrical
2
shocks or short circuits.
In case of emergencies (e.g. damaged housing, liquid or foreign objects
getting into the device), the device should be switched off immediately,
the mains plug of the BEETLE or the BA80 should be removed, and the
Wincor Nixdorf customer service should be contacted.
If the LCD display element is broken and the liquid crystal solution leaks
out of the display and onto your hands, clothing etc, wash your hands or
clothing immediately with soap or alcohol, holding them under running
water for at least 15 minutes. If the liquid comes into contact with your
eyes, please consult a doctor immediately.
Generally you should connect IT-devices only to power supply systems
with separately guided protective earth conductor (PE), known as TN-S
networks. Do not use PEN conductors! Please also observe the recommendations of the norm DIN VDE 0100, part 540, Appendix C2, as
well as EN50174-2, §5.4.3.
Cleaning the BA80
Always turn off the system before cleaning.
The glass surface of your Touch Screen should be cleaned with a mild,
abrasive-free, commercially available glass cleaning product. All pH-neutral
materials (pH 6 to 8) are good for cleaning. Cleaners with pH values 9 to 10
are not recommended. Cleaning with water and isopropyl alcohol is possible
as well. Do not use solvents containing acetic acid. Use a soft, fine-meshed
cloth to clean the surface. Dampen the cloth slightly and then clean the
screen. A wrong maintenance may cause damages to the screen, which are
not covered by guarantee or warranty.
Warranty
Generally, Wincor Nixdorf guarantees a limited warranty engagement
for twelve months beginning with the date of delivery. This warranty
engagement covers all those damages that occur despite a normal use
of the product. Damages because of
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the
inadequate location or surroundings
product,
3
will not be covered by the warranty. All parts of the product which are
subject to wear and tear (e.g. backlight of the LED) are not included in
the warranty engagement. Please order spare parts at the Wincor Nixdorf
customer service.
Recycling
Environmental protection does not begin when the time has come to dispose
of the BA80; it begins with the manufacturer. This product was designed according to our internal norm “Environmental conscious product design and
development”.
The BA80 is manufactured without the use of CFCs and CCHS and is produced mainly from reusable components and materials. The processed
plastics can, for the most part, be recycled. Even the precious metals can be
recovered, thus saving energy and costly raw materials.
Please do not stick labels onto plastic case parts. This would help us to reuse components and material.
At present, there are still some parts that are not reusable.
Wincor Nixdorf guarantees the environmentally safe disposal of these parts
in a Recycling Centre, which is certified pursuant to ISO 9001.
So don’t simply throw your BA80 on the scrap heap when it has served its
time, but take advantage of the environmentally smart up-to-date recycling
methods!
Please contact your competent branch or the Recycling Centre Paderborn
(for European countries) for information on how to return and re-use devices
and disposable materials under the following fax number:
Fax. +49 (0) 5251 8-26709
Or send us an email to:
referat.umweltschutz@wincor-nixdorf.com
We look forward to your fax or message.
4
Introduction
The ergonomic and user friendly flat-panel display BA80 can be applied in all
trade market segments like specialist retailers, departmental stores, selfservice stores, petrol stations or in restaurants. There is indeed a great deal
of scope for implementing a BA80.
They can be used, for example, as:
an ordering terminal
an information terminal
a lottery terminal
a point-of-sale terminal
a training terminal.
The low-energy, flicker-free and low radiation colour monitor of the BA80 is
an Active-Matrix-Display in TFT-technology (Thin Film Transistor).
Therefore, it is especial y suited for multimedia applications as it offers
brilliant colour representation, a better contrast ratio and a high display
speed. The screens can be installed directly on the cashier’s desk.
Advantages at a Glance
Low foot print
Energy-saving-mode
Flickerfree and free from radiation
Very good contrast ratio, adjustable loudness, sharpness, width, phase,
colour temperature and brightness via OSD menu
LCD TFT-Technology
Simple installation via plug and play feature
Mounting VESA 75 & 75 standard
5
Unpacking and checking the Delivery Unit
Unpack the parts and check to see whether the delivery matches the information on the delivery note.
The delivery comprises of the respective screen module and a standard
VGA cable (1,8 m). VGA cables of 3 m or 5 m length, cables for connecting
DVI-I and VGA and the required controller and data cables can be ordered
separately.
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly inform your Wincor Nixdorf sales outlet.
6
Loading...