Wincor Nixdorf BA73R-1, BA73R-3 Operating Manual

Operating Manual

BA73R-1

15" TFT LCD Monitor

Wincor Nixdorf Pte Ltd
2, Kallang Sector
Singapore 349277

Fax: [phone]

http://www.wincor-nixdorf.com

BA73R-1

15" TFT LCD Monitor

Operating Manual

Edition Jun 2006

Contents

Contents

Manufacturer’s Declaration and Approval ...............................1

General Authorization ................................................................................1

FCC-Class A Declaration...........................................................................1

Tested Safety............................................................................................2

User Information........................................................................................2

Safety Instructions.....................................................................................3

Instructions for Maintenance......................................................................4

Warranty....................................................................................................4

Recycling...................................................................................................5

Introduction................................................................................6

Advantages at a Glance............................................................................. 7

Unpacking and checking the Delivery Unit..................................................7

BA73R-1 Components...............................................................8

Screen Module...........................................................................................8

Power adapter and power cord..................................................................9

Cables.......................................................................................................9

Capacitive Touch Screen (Option)............................................................10

General ...............................................................................................10

Touch Screen and Sleep Mode............................................................11

How to Operate ...................................................................................12

Cleaning Instructions ...........................................................................12

Resistive Touch Screen (Option)..............................................................13

General ...............................................................................................13

Construction of the resistive Touch screen...........................................14

How to Operate ...................................................................................14

Cleaning Instructions ...........................................................................14

Installing the BA73R-1 (Table Top version) ..............................................15

Securing the screens (Tubular Stand Version) .........................................16

Adjustable Screen Angle..........................................................................17

Ergonomic Terminal Workplace...............................................................18

Installation................................................................................19

Connecting the VGA cable....................................................................... 19

01750098304 D BA73R-1 LCD Display – Operating Manual

Contents

Connecting the Touch cable (option)........................................................20

Cable routing ...........................................................................................21

Software Installation.................................................................................22

Status LED information............................................................................22

On-Screen Display (OSD)........................................................................23

Input source.........................................................................................25

Display setting.....................................................................................26

Color setting........................................................................................27

Image setting.......................................................................................29

Tools menu..........................................................................................30

Audio setting........................................................................................32

Exit OSD Menu....................................................................................33

Technical Data..........................................................................34

Models.....................................................................................................34

Operating Conditions...............................................................................35

Touch Screen (optional)........................................................................... 35

Display Specification................................................................................36

Display Mode........................................................................................... 38

Interface Definition ..................................................................39

VGA interface..........................................................................................39

Touch Interface........................................................................................ 40

BA73R-1 LCD Display – Operating Manual 01750098304 D

Manufacturer’s Certificate and Notes

Manufacturer’s Declaration and Approval

General Authorization

This device fulfills the requirements of Electromagnetic
Compatibility (EEC) standards, 89/336/EEC and 73/23/EEC
"Low Voltage Directive". Therefore, you will find the CE mark on
the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to c ause harmful
interference in which case the user will be required to correct the interference at
his own expense.

Le présent appareil numérique ne produit pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de la "classe A" prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des
Communications du Canada.

1 BA73R-1 LCD Display – Operating Manual 01750098304 D

Tested Safety

The BA73R has been awarded the GS symbol for "Gepruefte Sicherheit" (test
safety). BA73R fulfills the requirements for ergonomy according to ZH1/618:1980­10

User Information

Wincor Nixdorf (WN) does not accept responsibility for radio and TV interference
and faults that care caused by unauthorized changes that have been made to the
devices. Furthermore, cables or other devices that have not been approved by
WN may not be connected to the device. The user is responsible for any faults
and interference that are caused as a result.

Manufacturer’s Certificate and Notes

Additionally, the BA73R has also been awarded to cUL­and UL- symbol.

Repair work on the devices should only carried out by authorized
and specially trained personnel. Improper repairs will lead to the
loss of any guarantee and liability claims.

Extension boards with electrostatically endangered components can be identified
with this label.

If this monitor is to be used for office task, it’s required a specially controlled
luminous environment.

Wenn der Monitor fuer Bürozwecke eingesetzt wird, ist eine speziell

lichtgesteuerte Umgebung gefordert.

01750098304 D BA73R-1 LCD Display – Operating Manual 2

Safety Instructions

Safety Instructions

This device c onforms to the corresponding safety r egulations for information
technology devices, including electronic office machines f or use in the office
environment.

 If the device is moved from a cold environment to a warmer room where it is

to be operated, condensation could occur. The device must be completely dry
before being put into operation. Therefore an acclimatization time of at least
two hours should be accounted for.

 Lay all cables and supply lines so that nobody can tread on them or trip over

them.

 Data cables should neither be connected nor removed during electrical

storms.

 Protect the device from vibrations, dust, moisture and heat, and only transport

the device in its original packaging (to protect it against impact and blows).

 Take care to ensure that no foreign objects (e.g. paper clips) or liquids can

get into the inside of the device, as this could cause electrical shocks or short
circuits.

 In case of emergencies (e.g. damaged housing, liquid or foreign objects

getting into the device), the device should be switched off immediately, the
mains plug of the BEETLE or PC should be removed, and the Wincor Nixdorf
customer service should be contacted.

 If the LCD display element is broken and the liquid crystal solution leaks out

of the display and onto your hands, clothing etc, wash your hands or clothing
immediately with soap or alcohol, holding them under running water for at
least 15 minutes. If the liquid comes into contact with your eyes, please
consult a doctor immediately.

 Generally you should connect IT-devices only to power supply systems with

separately guided protective earth conductor (PE), known as TN-S networks.
Do not use PEN conductors! Please also observe the recommendations of
the norm DIN VDE 0100, part 540, Appendix C2, as well as EN50174-2,

§5.4.3.

3 BA73R-1 LCD Display – Operating Manual 01750098304 D

Instructions for Maintenance

Clean your BA73R-1 regularly with an appropriate surface cleaning product. Make
sure that the device is switched off, connector cables are unplugged and that no
moisture is allowed to get into the inside of the device.

Please observe the maintenance and cleaning instructions for each of the
BA73R-1 components. These instructions can be found in their respective
chapters.

Warranty

Wincor Nixdorf guarantees a limited warranty engagement for 12 months
beginning with the date of delivery. This warranty engagement covers all those
damages that occur despite a normal use of the product.

Damages because of

 improper or insufficient maintenance,

 improper use of the product or unauthorized modifications of the product,

Instructions for Maintenance

 inadequate location or surroundings

will not be covered by the warranty. All parts of the product which are subject to
wear and tear (e.g. backlight of the LED) ar e not includ ed i n th e warranty
engagement. Please order spare parts at the Wincor Nixdorf customer service.

01750098304 D BA73R-1 LCD Display – Operating Manual 4

Instructions for Maintenance

Recycling

Environmental protection does not begin when the time has come to dispose of
the BA73R-1; it begins with the manufacturer. This product was designed

acc ordin g t o our in ternal n orm “E nvironmental c onsci ous pr oduct design and
development”.

The BA73R-1 is manufactured without the use of CFCs and CCHS and is
produced mainly from reusable components and materials. The processed
plastics can, for the most part, be recycled. Even the precious metals can be
recovered, thus saving energy and costly raw materials.

Please do not stick labels onto plastic case parts. This would help us to re-use
components and material. You can protect our environment by only switching on
your equipment when it is actually needed. If possible, even avoid the stand-by­mode as this wastes energy, too. Also switch your equipment off when you take a
longer break or finish your work.

Currently at present, there are still some parts that are not reusable. Wincor
Nixdorf guarantees the environmentally safe disposal of these parts in a
Recycling Center, which is certified pursuant to ISO 9001.

So don’t simply throw your BA73R-1 on the scrap heap when it has served its
time, but take advantage of the environmentally smart up-to-date recycling
methods!

Please contact your competent branch or the Recycling Centre Paderborn (for
European countries) for information on how to return and re-use devices and
disposable materials under the following fax number:

Fax. [phone]

Or send us an email to:

[e-mail]

We look forward for your fax or message.

5 BA73R-1 LCD Display – Operating Manual 01750098304 D

Introduction

The BA73R-1 is a new addition to our range of flat-panel display. This display
features a standard analog RGB interface allowing connection to PC's CRT
output. There is no need to add a digital graphics adapter. Using the BA73R-1
provides you with a terminal-orientated, ergonomic and customer-friendly
cashier’s workplace. The BA73R-1 can also be optionally equipped with a Touch
Screen.

The display can be applied in all trade market segments like specialist retailers,
departmental stores, self-service stores, petrol stations or in restaurants. There is
indeed a great deal of scope for implementing a BA73R-1. Introduction

They can be used, for example, as:

 an ordering terminal

 an information terminal

 a lottery terminal

Introduction

 a point-of-sale terminal

 a training terminal.

The low-energy, flicker-free and radiation-free colour monitor of the BA73R-1 is
an Active-Matrix-Display in TFT-technology (Thin Film Transistor). Therefore, it is
especially suited for multimedia applications as it offers brilliant colour
representation, a better contrast ratio and a high display speed.

The screens can be installed directly on the cashier’s desk or fastened to a

tubular stand. Furthermore, they can also be set up on the central unit of a
modular BEETLE system.

01750098304 D BA73R-1 LCD Display – Operating Manual 6

Introduction

Advantages at a Glance

 low footprint

 ergonomic terminal workplace

 key to customer service

 basis for animation and multimedia

 flicker-free and free from radiation

 high resolution

 high brightness

 very good contrast ratio

 high brilliant colours (up to 16 millions)

 wider viewing angle (less glare through crosslight)

Unpacking and checking the Delivery Unit

Unpack the parts and check to see whether th e delivery matches the information
on the delivery note. The delivery comprises of the respective screen module.
Controllers and data cables, necessary for operation, can be ordered separately.
If damage has occurred during shipping or if the package contents do not match
the delivery note, promptly inform your Wincor Nixdorf sales outlet. Transport the
device only in its original packaging (to protect it against impact and shock).

7 BA73R-1 LCD Display – Operating Manual 01750098304 D

BA73R-1 Components

Screen Module

The screen module represents the main unit of the BA73R-1. It comprises of a
TFT-LCD colour screen, the auto-scaling display Controller and an inverter that
generates the voltage for backlighting the screen. As an option the screens are
available with Touch Screen.

BA73R-1 Components

Remove the cable cover by pushing
it in the direction of arrow (see
picture) and then taking it off
upwards.

The TFT LCD flat screen is an XGA 15” that is flicker-free and free of radiation
and has only a low heat emission. The BA73R-1 has a native resolution of 1024 x
768, but it features high-quality advanced auto-scaling display controllers that
allow scaling from VGA to XGA.

WARNING:

If the display element is damaged and the liquid crystal solution leaks out onto
your hands or clothing, please wash your hands or clothing immediately under
running water for at least 15 minutes, using soap or alcohol. If the liquid comes
into contact with your eyes, consult a medical doctor immediately.

01750098304 D BA73R-1 LCD Display – Operating Manual 8

BA73R-1 Components

Power adapter and power cord

If the AC power adapter and power cord are not provided with the display, user
has to ensure that a certified AC power adapter and power cord are used as
required by the S afety R egulation of the country. The power requirement of the

display is shown under the section “Display Specification”. Please refer to this

when selecting a suitable AC power Adapter.

Countries Safety Approvals

USA UL
Canada CSA
Germany GS
Japan PSE
Taiwan BSMI
China CCC

For other c ountries not mentioned in the above list, please check with the local
authority.

Cables

 Standard VGA cable, 1.8m

 Touch Cable, 1.8m (option)

9 BA73R-1 LCD Display – Operating Manual 01750098304 D