Wincor Nixdorf BA66-1 Product Manual

BA66-1 RS232

Cashier Display

Product Manual

Edi ti on April 2006

Li nux™ is a re gis te red tra de mark of Li nus Tor valds
Pen ti um™ is a re gis te red tra de mark of the In tel Cor po ra ti on
MS-DOS™, Wind ows 95™, Wind ows 98™, Wind ows NT™, Wind ows ME™,
Wind ows2000™and Wind ows XP™ are re gis te red tra de marks of the Mi cro soft
Cor po ra ti on
BEET LE™ is a re gis te red tra de mark of Win cor Nix dorf In ter na tio nal GmbH

Co py right© Win cor Nix dorf In ter na tio nal GmbH, 2006

The re pro duc ti on, trans mis si on or use of this do cu ment or its con tents is not
per mit ted wit hout ex press aut ho ri ty.
Of fen ders will be li ab le for da ma ges.
All rights, in clu ding rights crea ted by pa tent grant or re gi stra ti on of a uti li ty mo del or de ­sign, are re ser ved.
De li very sub ject to avai la bi li ty; tech ni cal mo di fi ca tions pos si ble.

Contents

Manufacturer’s De cla ra ti on and Ap pro val ........................1

FCC-Class A De cla ra ti on............................................................................1

No tes on Care.............................................................................................1

War ran ty .....................................................................................................2

Re cy cling the BA66.....................................................................................3

Ge ne ral No tes ......................................................................4

In stal la ti on of BA66 to TA61/TA64 key bo ard ..............................................6

In stal la ti on of the Con nec tor..............................................8

Tube-ba sed ................................................................................................8

Base/ Ro ta ting Pla te .................................................................................10

Cas hier Dis play Con trol ....................................................13

Con trol Se quen ces ............................................................14

Bac kspa ce (wit hout de le ting) ....................................................................14

Line feed ...................................................................................................14

Car ria ge re turn..........................................................................................15

De le te dis play ...........................................................................................15

Po si ti on cur sor ..........................................................................................15

De le te to end of line ..................................................................................16

Set coun try code .......................................................................................16

Call dis play iden ti fi ca ti on ...........................................................................18

Sys tem Con nec ti on ...........................................................19

Ca ble Con nec ti on ..............................................................21

Test Functions ...................................................................22

Star ting the test by en te ring a code ..........................................................22

Tech ni cal Data ...................................................................23

FCC-CLASS A DECLARATION

Manufacturer’s Declaration and Approval

This de vi ce ful fills the re qui re ments of the EEC di rec ti ves
2004/108/EC “Elec tro mag ne tic Com pa ti bi li ty”.

Therefore, you will find the CE mark on the back of the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful inter-ference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense. Modifications not authorized by the
manufacturer may void users authority to operate this device. This class A
digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la classe A est conforme à la norme NMB-003
du Canada.

Notes on Care

Wipe the cashier display with a damp cloth as required. Solvents must not
be used under any circumstances as they may damage the plastic.

1

WARRANTY

Warranty

Win cor Nix dorf gua ran tees ge ne ral ly a war ran ty en ga ge ment for 12 months
be gin ning with the date of de li very. This war ran ty en ga ge ment co vers all
da ma ges which oc cur de spi te a nor mal use of the pro duct.

Da ma ges be cau se of

n

im pro per or in suf fi cient main ten an ce,

n

im pro per use of the pro duct or un aut ho ri zed mo di fi ca tions of the pro duct,

n

ina de qua te lo ca ti on or sur roun dings

will not be co ver ed by the war ran ty.

For furt her in for ma ti on of the sti pu la ti on look at your con tract.

All parts of the pro duct which are sub ject to wear and tear are not in clu ded
in the war ran ty en ga ge ment.

Plea se or der spa re parts at the Win cor Nix dorf cus to mer ser vi ce.

2

RECYCLING THE BA66

Recycling the BA66

En vi ron men tal pro tec ti on does not be gin when
the time has come to dis po se of the BA66; it
be gins with the ma nu fac tu rer. This pro duct was
de sig ned ac cor ding to our in ter nal norm
“En vi ron men tal cons ci ous pro duct de sign and
de ve lop ment”.

The BA66 is manufactured without the use of CFCs and CCHS and is
produced mainly from reusable components and materials.

The processed plastics can, for the most part, be recycled. Even the
precious metals can be recovered, thus saving energy and costly raw
materials.

Please do not stick labels onto plastic case parts. This would help us to
re-use components and material.

You can protect our environment by only switching on your equipment when
it is actually needed. If possible, even avoid the stand-by-mode as this
wastes energy, too. Also switch your equipment off when you take a longer
break or finish your work.

At this time, there are still some parts that are not reusable. Wincor Nixdorf
International GmbH guarantees the environmentally safe disposal of these
parts in a Recycling Center, which is certified pursuant to ISO 9001 and ISO

14001.

So don’t discard your display on the garbage when it has served its time, but
take advantage of the environmentally smart, up-to-date recycling methods!

Plea se con tact your com pe tent branch or the Re cy cling Cen ter Pa der born
(for Eu ro pe an coun tries) for in for ma ti on on how to re turn and re-use de vi ces
and dis po sa ble ma ter ials un der the following mail address:

Email: info@win cor-nix dorf.com
or on the internet.

We look for ward to your mail.

3

GENERAL NOTES

General Notes

The BA66 cashier display is mainly used in POS installations which are
designed in modular form. It is either securely screwed to the POS keyboard
or installed near it so that it is ideally positioned in the cashier’s field of
vision.

The display is a vacuum florescent display (VFD) with two lines, each with
20 alphanumeric characters. The standard character set and corresponding
country code are implemented. Implementation of VFD technology ensures
that the cashier display is ergonomically designed to achieve a high degree
of readability, irrespective of the cashier’s angle of vision.

The display is connection to the point of sale system via a RS232C
interface. The voltage (12 V DC) is also supplied via this interface.

The following two BA66 cashier displays are available to meet individual
installation requirements:

BA66 cas hier dis play with base/ ro ta ting plate

Connector cables are available in different lengths. The cables are ordered
and delivered separately.

4

Cas hier dis play with adap ter for tube-ba sed in stal la ti on

35°

20°

RECYCLING THE BA66

Cas hier dis play to TA61 or TA64

5