Wincor Nixdorf BA66 Product Manual

BA66

Cashier Display

Product Manual

Edi ti on March 2003

Pen ti um™ is a re gis te red tra de mark of the In tel Cor po ra ti on
MS-DOS™, Wind ows 95™, Wind ows 98™, Wind ows NT™ and Wind ows CE™ are
re gis te red tra de marks of the Mi cro soft Cor po ra ti on
BEET LE™ is a re gis te red tra de mark of Win cor Nix dorf In ter na tio nal GmbH

Co py right© Win cor Nix dorf In ter na tio nal GmbH, 2003

The re pro duc ti on, trans mis si on or use of this do cu ment or its con tents is not
per mit ted wit hout ex press aut ho ri ty.
Of fen ders will be li ab le for da ma ges.
All rights, in clu ding rights crea ted by pa tent grant or re gi stra ti on of a uti li ty mo del or de ­sign, are re ser ved.
De li very sub ject to avai la bi li ty; tech ni cal mo di fi ca tions pos si ble.

Contents

Ma nu fac tu rer’s De cla ra ti on and Ap pro val .............................1

FCC-Class A De cla ra ti on............................................................................1

No tes on Care.............................................................................................2

War ran ty .....................................................................................................2

Re cy cling the BA66.....................................................................................3

Ge ne ral No tes .......................................................................4

In stal la ti on In struc tions for the BA66 Cas hier Dis play.................................6

In stal la ti on of the Con nec tor..................................................8

Tube-ba sed ................................................................................................8

Base/ Ro ta ting Pla te .................................................................................10

Cas hier Dis play Con trol.......................................................13

Con trol Se quen ces ..............................................................14

Back spa ce (wit hout de le ting) ....................................................................14

Line feed ...................................................................................................14

Car ria ge re turn..........................................................................................15

De le te dis play ...........................................................................................15

Po si ti on cur sor ..........................................................................................15

De le te to end of line ..................................................................................16

Set coun try code .......................................................................................16

Call dis play iden ti fi ca ti on ...........................................................................18

Sys tem Con nec ti on .............................................................19

Ca ble Con nec ti on ................................................................21

Test Functions .....................................................................22

Star ting the test by en te ring a code ..........................................................22

Tech ni cal Data.....................................................................23

FCC-CLASS A DECLARATION

Manufacturer’s Declaration and Approval

This de vi ce ful fills the re qui re ments of the EEC di rec ti ves
89/336/EEC “Elec tro mag ne tic Com pa ti bi li ty” and 73/23/EEC
“Low Vol ta ge Di rec ti ve”.

Therefore, you will find the CE mark on the back of the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.

Le présent appareil numéique n’ émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la “Classe A”
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.

Wincor Nixdorf International GmbH (WN) accepts no responsibility for radio
and television reception interference resulting from unauthorized
modifications to the equipment. Furthermore, neither cables nor devices
which have not been approved for use by WN may be connected. The user
shall be held responsible for interference caused in this manner.

Device repairs must be carried out by authorized personnel. All guarantee
and liability claims are automatically excluded if repairs have been carried
out by unauthorized personnel.

1

NOTES ON CARE

Notes on Care

Wipe the cashier display with a damp cloth as required. Solvents must not
be used under any circumstances as they may damage the plastic.

Warranty

Wincor Nixdorf guarantees a limited warranty engagement for 12 months
beginning with the date of delivery. This warranty engagement covers all
those damages which occur despite a normal use of the product.

Damages because of

n

Improper or insufficient maintenance,

n

Improper use of the product or unauthorized modifications of the product,

n

Inadequate location or surroundings

will not be covered by the warranty.

2

RECYCLING THE BA66

Recycling the BA66

En vi ron men tal pro tec ti on does not be gin when
it co mes time to dis po se of the BA66; it be gins
with the ma nu fac tu rer. This pro duct was
de sig ned ac cor ding to our in ter nal norm
“En vi ron men tal cons ci ous pro duct de sign and
de ve lop ment”.

The BA66 is manufactured without the use of CFCs und CCHS and is
produced mainly from reusable components and materials.

The processed plastics can, for the most part, be recycled. Even the
precious metals can be recovered, thus saving energy and costly raw
materials.

Please do not stick labels onto plastic case parts. This would help us to
re-use components and material.

At this time, there are still some parts that are not reusable. Wincor Nlxdorf
guarantees the environmentally safe disposal of these parts in a Recycling
Center, which is certified pursuant to ISO 9001.

So don’t simply throw your BA66 on the scrap heap when it has served its
time, but take advantage of the environmentally smart, up-to-date recycling
methods!

Please contact your competent branch office for information on how to
return and re-use devices and disposable materials.

3

GENERAL NOTES

General Notes

The BA66 cashier display is mainly used in POS installations which are
designed in modular form. It is either securely screwed to the POS keyboard
or installed near it so that it is ideally positioned in the cashier’s field of
vision.

The display is a vacuum florescent display (VFD) with two lines, each with
20 alphanumeric characters. The standard character set and corresponding
country code are implemented. Implementation of VFD technology ensures
that the cashier display is ergonomically designed to achieve a high degree
of readability, irrespective of the cashier’s angle of vision.

The display is connection to the point of sale system via a RS232C
interface. The voltage (12 V DC) is also supplied via this interface.

The following two BA66 cashier displays are available to meet individual
installation requirements:

BA66 cas hier dis play with base/ ro ta ting plate

Connector cables are available in different lengths. The cables are ordered
and delivered separately.

4

Cas hier dis play with adap ter for tube-ba sed in stal la ti on

35°

20°

RECYCLING THE BA66

Cas hier dis play to TA61 or TA64

5