Page 1
INSTALLATION INSTRUCTIONS
TDM76 TRAILER KIT
COMPONENT LIST
REF. # PART # DESCRIPTION QTY.
1 300084-1 Base 1
2 300085-1 Axle 1
3 43657-000 Wheel 2
4 300081-1 Tongue Support 2
5 300083-1 Tongue 1
6 300161-2 Shaft Support 1
7 300161-1 Shaft Support 1
8 300082 Hitch 2
TDM76-1 Parts Bag 1
16343-000 Axle Protector 2
112050-00 TDM76I
Page 2
STEP 1
Open hardware bag and separate components.
•
FASTENERS & MISC. COMPONENTS
(not shown in actual size)
9
12
11
13
11
10
14
15
17
16
HARDWARE & FASTENER LIST
REF # PART # DESCRIPTION QTY
9 48178-000 1/2” X 1” Bolt 12
10 57580-007 1/2” X 3” Bolt 4
11 636-000 1/2“ Split Lock Washer 17
12 1744-000 1/2” Hex Nut 17
13 57580-002 1/2” X 3 1/2” Bolt 1
14 1178-000 Flat Washer 4
15 16248-000 1/4” Flange Nut 4
16 20979-000 Cotter Pin 2
17 300163 U-Bolt 2
212050-00 TDM76I
Page 3
STEP 2
Attach tongue supports (ref. 4) to the base (ref. 1) using the hardware provided
•
(ref. 9, 11, 12). Place tongue (ref. 5) into the tongue supports (ref. 4) and attach
using the hardware provided. (ref. 10, 11, 12). Place hitch pieces (ref. 8) and
tongue supports (ref. 6, 7) on the tongue (ref. 5) and attach using the hardware
provided (ref. 10, 11, 12, 13).
312050-00 TDM76I
Page 4
STEP 3
Slide the axle (ref. 2) through the holes in the base (ref. 1). Slide one washer
•
(ref. 14 onto each end of the axle. Lift the base and tongue assembly and slide
the wheels (ref. 3) on the axle. Place the other two washers (ref. 14) on the axle.
Place the cotter pins (ref. 16) through the axle and bend to secure.
STEP 4
Place the generator on the base and mount using the hardware provided (ref. 9,
•
11, 12).
Winco Inc.
Service Dept.
507-357-6831
412050-00 TDM76I
Loading...