Winco 5001 User Manual

OWNER’S OPERATING &

MAINTENANCE MANUAL

PATENT PENDING

PLEASE DO NOT DISCARD THIS MANUAL! KEEP FOR FUTURE REFERENCE AND TRAINING

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION........................................................................................ 3-4

ASSEMBLY INSTRUCTIONS......................................................….............................................. 5-6

ATTENDANT OPERATING INSTRUCTIONS............................................................…............... 7-9

OCCUPANT OPERATING INSTRUCTIONS...............................................................................10-11

GENERAL MAINTENANCE...............................................……..................................................12-13

SPECIFICATIONS........................................................................................................................14

AUGUSTINE CHAIR OPTIONS...................................................................................................15

CONTACT & WARRANTY INFORMATION..........................................................…....BACK COVER

Winco assumes no responsibility for damage or injury caused by the improper assembly,

installation, use or maintenance of this product.

IMPORTANT!

PLEASE READ THIS ENTIRE MANUAL BEFORE USING RECLINER. DO NOT INSTALL, MAINTAIN OR OPERATE THIS EQUIPMENT WITHOUT READING AND FOLLOWING THIS MANUAL. OTHERWISE INJURY AND/ OR DAMAGE MAY RESULT.

THE INFORMATION CONTAINED IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. PHOTOS ARE REPRESENTATIVE OF THE PRODUCT AND MAY VARY SLIGHTLY FROM ACTUAL PRODUCTION MODELS.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!

NO PART OF THIS MANUAL MAY BE DUPLICATED IN ANY FORM WITHOUT THE PRIOR WRITTEN CONSENT OF WINCO MFG, LLC. UNAUTHORIZED DUPLICATION MAY RESULT IN CIVIL PROSECUTION TO THE MAXIMUM

EXTENT ALLOWED BY LAW.

Products with the following markings are intended for commercial use only.

SYMBOLS

FOLLOW INSTRUCTIONS

GENERAL WARNING SIGN

DC VOLTAGE

CENTRAL-LOCKING BRAKE

TYPE B APPLIED PART

PINCH POINT WARNING SIGN

IMPORTANT - PLEASE READ

FOR PRODUCTS WITH POWERED OPTIONS (Heat, Massage, etc...)

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

(Read all instructions before using this product.)

When using an electrical appliance, basic precautions should always be followed, including the following:

DANGER - To reduce the risk of electric shock always unplug this product from the electrical outlet before cleaning, maintenance or servicing.

WARNING:

1. Unplug this product from the electrical outlet when not in use.

2. Supervision should be provided when using this product.

3. Use this product only for its intended use as described in this manual.

4. Do not use attachments not recommended by the manufacturer.

5. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water, contact an authorized Winco service center for instructions.

6. DO NOT carry or pull this product by power supply cord or use the cord as a handle.

7. Keep the cord away from heated surfaces.

8. Do not use outdoors.

9. To disconnect, turn all controls to the "off" position, then remove plug from outlet. Pull plug only to remove cord.

10. Clean switch with a damp cloth only – Warranty will be VOID if liquid is introduced into switch mechanism.

11. Extension cords are not recommended.

12. DO NOT roll recliner or other equipment over cord.

13. Recliner comes with a grounded three prong plug. If the plug does not ﬁ t into the outlet, contact a certiﬁ ed electri- cian to install the proper outlet. DO NOT MODIFY THE PLUG IN ANY WAY.

14. Keep children away from extended foot support (or other similar parts).

DANGER: i. Never insert pins, or attach other metallic fasteners into/onto any part of this chair. ii. Do not use this product if the covering shows signs of deterioration, such as checking, blistering, or cracking. iii. KEEP DRY - Do not operate in a wet or moist condition or environment.

WARNING: i. Long term, continuous exposure to heat may cause burns. It is recommended that skin in contact with heated

area be checked for redness and blistering during long term usage. Do not use on an infant, invalid or incapacitated person. Do not use on insensitive skin or on a person with poor blood circulation. If you are uncertain if you should use this product, please consult your physician about the use of heat and massage.

ii. Do Not Crush/Pinch heating elements or wiring.

WARNING: Connect this product to a properly grounded outlet only.

IMPORTANT - PLEASE READ

BASIC SAFETY PRECAUTIONS:

1. READ AND FOLLOW ALL DIRECTIONS.

2. NEVER STAND on slide-out foot support – foot support is not a step; INJURY MAY OCCUR.

3. DO NOT put hands, feet, or clothing into any openings when changing positions on recliner. Attendant MUST confirm that users arms, legs, hands and feet are clear while changing recliner positions or SERIOUS INJURY MAY OCCUR.

4. Lock casters at all times, except when moving chair.

5. STAY CLEAR of the recliner mechanisms when operating chair.

6. DO NOT use recliner for transporting in or with ANY type of vehicle or trailer. Winco recliners have not been tested or approved for use by an occupant in any type of vehicle or trailer.

7. NEVER use the chair arms or backrest, or tables as a seat; SERIOUS INJURY OR DAMAGE MAY OCCUR.

8. Periodically check the tightness of all nuts, bolts and screws.

9. Immediately REMOVE FROM SERVICE any recliner with broken recline mechanisms, torn upholstery, and/or other mechanical or visible damage.

10. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.

11. NEVER EXCEED the recommended weight capacity.

12. This chair is NOT intended nor suitable for patient transport.

ASSEMBLY INSTRUCTIONS

PREPARATION:

1. Carefully examine your product for any damage. Inspect all components. IF DAMAGE IS EVIDENT, REFUSE SHIPMENT, & CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY.

2. Remove all packaging material that was secured for shipping.

3. Carefully remove the product from the carton.

4. Save all boxes and packaging material until after you have assembled your product and have verified that all components are functioning properly.

REAR BRAKE ASSEMBLY INSTRUCTIONS:

This chair is shipped with the central-locking casters in the LOCKED position.

To assemble the REAR central-lock lever:

1. Loosen thumb screw and slide the lever (A) onto the "HEX" portion of the bar.

2. Tighten thumb screw (B).

3. Lift UP on the lever to UNLOCK the central-locking casters.

BACK ASSEMBLY INSTRUCTIONS:

1. Lock casters by pushing down the central-lock lever located at the rear of chair. (See Lock/Unlock Casters pg.7)

IMPORTANT:

• Keep objects and persons clear of the chair before performing

step 2.

2. Pull one of the recline levers (A), located on either side of the chair, until fully extended to bring the recline mechanism (B) into its upright position.

NOTE: Legrest is spring loaded and will be rapidly released into

the recline position when recline lever is pulled.

3. Release the recline lever and push legrest in, to its stored position.

+ 11 hidden pages