How it Works
Winchester
Loading...
B2332517
User Manual
16 pgs593.2 Kb0
User Manual
20 pgs789.84 Kb0
Table of contents
Loading...

Winchester B2332518, B2332517, B2332480, B2332479 User Manual

A
V
A
TECHNICAL
®
TECHNICAL
GUIDE
GUIDE
MODULAR STANDARD ECM
IR HANDLERS
5493749-BTG-B-0619

DESCRIPTION

This unique modular system allows the flexibility to handle any application. These versatile ME blowers may be used for upflow, downflow, or horizontal left or right applications. They may be combined with cased coils to function as a cooling only unit or with a heat pump including electric heat for 1 and 3 phase applications. The ME blower and 6HK electric heat kits can be used as stand alone electric furnaces. Using Standard ECM motors, system matches provide higher SEER/HSPF ratings than standard blower models at attractive price points.
FOR USE WITH SPLIT-SYSTEM COOLING AND HEAT PUMPS
1
Due to continuous product improvement, specifications are subject to change without notice.
isit us on the web at
www.simplygettingthejobdone.com

FEATURES

COMMON ME AIR HANDLER AND MATCH-UP CM COIL FEATURES
Rigid Case Construction - An interior endoskeleton for
structural support, smooth sides, and locks in insulation. Powder-painted - G30 galvanized steel case provide a coated
edge that resists corrosion and rust creep. Quality Construction - Structural components are made of
Aluminum or G90 galvanized steel to prevent corrosion. Improved Insulation Design - Single piece with no external
screws to reduce thermal transmission paths to prevent sweating. Foil faced insulation for ease of cleaning.
Case Depth - These models have 20.5” casing which provide ease of attic access and tight applications.
ME AIR HANDLERS Factory Sealed - Achieves 2% or less total airflow leakage rate
at duct leakage test conditions in positive and negative pressure for system airflow verification.
Electric Heat Kits - 6HK series of field installed electric heat kits are available for installation-friendly and easy service applications.
Blowers - All models use direct-drive, standard ECM motors. CM COILS
MaxAlloy
lasting performance, efficiency, and reliability. Thermostatic Expansion Valve - The TXV is installed using
Chatleff mechanical fittings and is easy to install on any MaxAlloy coil without brazing to create an appropriate system match. Some models are available with a factory installed TXV.
Thermoset Drain Pan - Low retention and positive slope for drainage to reduce potential mold or contaminants.
Accessories - A full line of matching accessories available for use with the blower and coils to provide for any type of application.
TM
Coil - Long life aluminum coils built to deliver
dditional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY
Standard 5-year limited parts warranty. Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replacement or closing for new home construction.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
5493749-BTG-B-0619
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
DIMENSIONS AND DUCT CONNECTION DIMENSIONS . . . . . . . . 3
DIMENSIONS - ME MODULAR AIR HANDLERS AND CM
MULTI-POSITION FULL CASED COILS . . . . . . . . . . . . . . . . . . . . . 3
COOLING CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PHYSICAL AND ELECTRICAL DATA - COOLING ONLY . . . . . . . . 5
kW AND MBH CONVERSIONS - FOR TOTAL
POWER INPUT REQUIREMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
APPLICATION FACTORS - RATED CFM VS. ACTUAL CFM . . . . . 6
ELECTRICAL DATA - COOLING ONLY . . . . . . . . . . . . . . . . . . . . . . 6
MINIMUM FAN SPEED - ELECTRICAL HEAT
WITH HEAT PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DEFAULT BLOWER SPEEDS FOR FER
COMPLIANCE - ELECTRICAL HEAT ONLY . . . . . . . . . . . . . . . . . . 6
ELECTRIC HEAT PERFORMANCE DATA: 208/230-1-60 AND
208/230-3-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ELECTRICAL DATA FOR SINGLE SOURCE
POWER SUPPLY: 208/230-1-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ELECTRICAL DATA FOR MULTI-SOURCE
POWER SUPPLY: 208/230-1-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ELECTRICAL DATA FOR SINGLE SOURCE
POWER SUPPLY: 208/230-3-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ELECTRICAL DATA FOR MULTI-SOURCE
POWER SUPPLY: 208/230-3-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
POWER WIRING - LINE CONNECTIONS . . . . . . . . . . . . . . . . . . . 10
BLOWER SPEED CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 10
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FILTER RACK DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TYPICAL APPLICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
LIMITATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
COMBUSTIBLE FLOOR BASE ACCESSORY . . . . . . . . . . . . . . . . 12
TYPICAL THERMOSTAT CONNECTION . . . . . . . . . . . . . . . . . . . . 13
AIRFLOW DATA - CFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

NOMENCLATURE

PRODUCT TYPE
POSITION MOTOR TYPE
OPTIONS
NOMINAL AIRFLOW
CABINET WIDTH
OPTIONS VOLTAGE
(Voltage-Phase-Hertz)
GENERATION (MAJOR REVISION)
STYLE LETTER (MINOR REVISION) NOT USED FOR ORDERING
M = Modular Blower
M
P = Multi PSC E = Multi Std ECM
E
V = Multi VS ECM C = Communications Ready
-
- (No Designator) = Standard (No Options) 08 = 800 CFM 12 = 1,200 CFM
12
14 = 1,400 CFM 16 = 1,600 CFM 20 = 2,000 CFM A = 14.5" B = 17.5"
B
C = 21.0" D = 24.5"
N = No options
N
2 = 208/230-1-60
2
1 = 1st Gen 2 = 2nd Gen
1
etc. A = Style A B = Style B
A
etc.
2 Johnson Controls Ducted Systems
5493749-BTG-B-0619

DIMENSIONS AND DUCT CONNECTION DIMENSIONS

E
AIR HANDLER
(OPENING)
COIL
19-1/8”
A
F
F
B
B
20-1/2”
21-1/2”
C (OPENING)
A
20-1/2”
21-1/2”
SERVICE DISCONNECT
PANEL
12-3/16”
C (OPENING)
BOTTOM OPENING
D (OPENING)
D
BOTTOM INLET
19-1/8”
DIMENSIONS
19-1/8”
TOP OUTLET DIMENSIONS
DIMENSIONS

DIMENSIONS - ME MODULAR AIR HANDLERS AND CM MULTI-POSITION FULL CASED COILS

Dimensions
Models
Height Width Opening Widths Wiring Knockouts
AB C D
ME08BN21 21-1/2 17-1/2 16-1/2 16-1/2 ME12BN21 21-1/2 17-1/2 16-1/2 16-1/2 ME12CN21 22-1/2 21 20 20 ME14DN21 22-1/2 24-1/2 23-1/2 23-1/2 ME16CN21 22-1/2 21 20 20 ME20DN21 22-1/2 24-1/2 23-1/2 23-1/2
Dimensions
Models
2
Height Width Opening Widths
A B C D Liquid Vapor
CM18A* 19-1/2 14-1/2 13-1/2 13-1/2
CM18B 19 17-1/2 16-1/2 16-1/2 CM24A* 19-1/2 14-1/2 13-1/2 13-1/2 CM24B* 19 17-1/2 16-1/2 16-1/2
CM24C 21 21 20 20 CM30A* 25-1/2 14-1/2 13-1/2 13-1/2 CM30B* 23 17-1/2 16-1/2 16-1/2
CM30C 23 21 20 20
CM30D 25 24/1/2 23-1/2 23-1/2
CM36A 25-1/2 14-1/2 13-1/2 13-1/2 CM36B* 25-5/8 17-1/2 16-1/2 16-1/2
CM36C* 25 21 20 20
CM36D 25 24-1/2 23-1/2 23-1/2
CM42C* 27 21 20 20
CM42D 27 24-1/2 23-1/2 23-1/2
CM48C* 33 21 20 20 CM48D* 32-3/4 24-1/2 23-1/2 23-1/2 CM60C* 33 21 20 20 CM60D* 32-3/4 24-1/2 23-1/2 23-1/2
CM64D 32-3/4 24-1/2 23-1/2 23-1/2
1. All dimensions are in inches.
2. Asterisk denotes coils available with Factory installed TXV.
3. Refrigerant line sizes may require larger lines for extended line lengths. See Application Data part number 247077.
4. Adapter fitting must be field installed for other line set size.
5. See outdoor unit technical guide for proper line set size.
1
EF
Power Control
7/8 (1/2), 1-3/8 (1),
1-23/32 (1-1/4)
1
Refrigerant Connections
Line Size
3/8
A0452-002
7/8 (1/2)
3,4,5
3/4
7/8
Johnson Controls Ducted Systems 3
5493749-BTG-B-0619
COOLING CAPACITY1
Models
CM18B 600
CM24B 800
CM24C 800
CM30B 1000
CM30C 1000
CM30D 1000
CM36B 1000
CM36B 1200
CM42C 1200
CM36C 1200
CM36D 1200
CM42C 1400
CM42D 1400
Continued on next page
Rated CFM
Entering Air
2
Dry/Wet Bulb (°F)
MBH@ Evap. Temp. and Corresponding R-410A Pressure (°F/PSIG)
35/107.9 40/118.9 45/130.7 50/143.3
85/72 45.7 41.6 36.8 30.5 80/67 38.5 33.9 28.5 22.3 75/62 31.5 26.5 20.5 15.9 70/57 24.4 19.5 15.2 11.5 85/72 52.2 47.5 41.8 35.0 80/67 43.6 38.3 31.9 24.5 75/62 35.2 29.5 22.7 16.2 70/57 27.1 20.7 15.5 11.4 85/72 52.2 47.5 41.8 35.0 80/67 43.6 38.3 31.9 24.5 75/62 35.2 29.5 22.7 16.2 70/57 27.1 20.7 15.5 11.4 85/72 75.3 67.8 56.8 47.1 80/67 62.6 54.6 44.2 34.5 75/62 50.2 41.3 32.0 22.9 70/57 37.8 30.1 21.5 16.2 85/72 75.3 67.8 56.8 47.1 80/67 62.6 54.6 44.2 34.5 75/62 50.2 41.3 32.0 22.9 70/57 37.8 30.1 21.5 16.2 85/72 75.3 67.8 56.8 47.1 80/67 62.6 54.6 44.2 34.5 75/62 50.2 41.3 32.0 22.9 70/57 37.8 30.1 21.5 16.2 85/72 82.1 73.7 64.1 54.4 80/67 68.6 60.1 50.5 39.5 75/62 56.3 47.0 37.3 29.2 70/57 43.5 36.0 28.3 21.6 85/72 91.6 82.4 71.3 59.4 80/67 76.5 65.4 54.6 42.8 75/62 61.3 51.2 40.0 30.5 70/57 47.5 38.1 28.7 22.3 85/72 98.0 88.6 77.4 66.4 80/67 82.6 72.6 61.7 50.6 75/62 68.5 57.6 47.5 36.6 70/57 53.9 44.8 35.0 28.4 85/72 91.6 82.4 71.3 59.4 80/67 76.5 65.4 54.6 42.8 75/62 61.3 51.2 40.0 30.5 70/57 47.5 38.1 28.7 22.3 85/72 91.6 82.4 71.3 59.4 80/67 76.5 65.4 54.6 42.8 75/62 61.3 51.2 40.0 30.5 70/57 47.5 38.1 28.7 22.3 85/72 100.6 89.8 78.2 64.7 80/67 83.5 73.7 59.8 48.0 75/62 67.8 55.8 44.7 32.5 70/57 52.3 41.5 30.7 23.7 85/72 100.6 89.8 78.2 64.7 80/67 83.5 73.7 59.8 48.0 75/62 67.8 55.8 44.7 32.5 70/57 52.3 41.5 30.7 23.7
4 Johnson Controls Ducted Systems
5493749-BTG-B-0619
COOLING CAPACITY1 (Continued)
Entering Air
Models
CM48C 1400
CM48C 1600
CM48D 1600
CM60C 1800
CM61C 1800
CM60D 1800
CM64D 1800
1. See Condensing Unit or Heat Pump Technical Guide for Total Cooling Capacity and Sensible Capacity.
2. Airflow is calculated for each system tonnage.
Rated CFM
2
Dry/Wet Bulb (°F)
85/72 108.0 98.4 88.1 73.8 80/67 93.3 82.1 69.7 57.0 75/62 75.9 64.4 53.1 41.9 70/57 60.7 49.9 39.4 32.4 85/72 115.2 105.0 93.9 79.0 80/67 88.3 78.2 65.5 52.6 75/62 72.7 60.8 50.1 37.6 70/57 57.7 46.9 36.6 29.7 85/72 115.2 105.0 93.9 79.0 80/67 88.3 78.2 65.5 52.6 75/62 72.7 60.8 50.1 37.6 70/57 57.7 46.9 36.6 29.7 85/72 115.1 103.0 91.7 78.6 80/67 96.8 85.9 73.7 60.5 75/62 80.7 69.4 57.5 43.5 70/57 58.7 48.9 37.7 32.7 85/72 122.9 111.8 98.0 82.6 80/67 102.2 89.8 75.7 59.9 75/62 82.5 69.7 54.9 38.7 70/57 64.3 50.8 38.2 29.4 85/72 115.1 103.0 91.7 78.6 80/67 96.8 85.9 73.7 60.5 75/62 80.7 69.4 57.5 43.5 70/57 58.7 48.9 37.7 32.7 85/72 133.6 118.5 103.2 86.6 80/67 111.4 96.2 80.3 62.8 75/62 90.7 75.1 60.0 43.5 70/57 70.6 56.9 42.5 32.8
MBH@ Evap. Temp. and Corresponding R-410A Pressure (°F/PSIG)
35/107.9 40/118.9 45/130.7 50/143.3

PHYSICAL AND ELECTRICAL DATA - COOLING ONLY

Models ME08B ME12B ME12C ME14D ME16C ME20D
Blower - Diameter x Width 10 x 8 10 x 8 11 x 10 11 x 10 11 x 10 11 x 10 Motor Voltage 208/230 208/230 208/230 208/230 208/230 208/230
Full Load Amps @230 V 2.6 3.8 3.8 3.8 5.4 5.4
Filter
Shipping / Operating Weight (lb) 52/51 52/51 68/67 75/74 68/67 75/74
1. Field Supplied.
HP 1/3 HP 1/2 HP 1/2 HP 1/2 HP 3/4 HP 3/4 HP Nominal RPM 1050 1050 1050 1050 1050 1050
Type DISPOSABLE OR WASHABLE Size 16 x 20 x 1 16 x 20 x 1 20 x 20 x 1 22 x 20 x 1 20 x 20 x 1 22 x 20 x 1
1
Bottom Rack Kit 1BR01117 1BR01117 1BR01121 1BR01124 1BR01121 1BR01124 Permanent Type Kit 1PF0601 1PF0601 1PF0602 1PF0603 1PF0602 1PF0603

kW AND MBH CONVERSIONS - FOR TOTAL POWER INPUT REQUIREMENT

For a power distribution voltage that is different than the provided nominal voltage, multiply the kW and MBH data from the table by the conversion factor in the following table.
DISTRIBUTION POWER NOMINAL VOLTAGE CONVERSION FACTOR
208 V 240 V 0.75 220 V 240 V 0.84 230 V 240 V 0.92
Johnson Controls Ducted Systems 5
Loading...
+ 11 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use