Winbook A100, A212, A200, A215, A210 Getting Started

Recovery Options

There are two

options to recover

the software to

your hard drive.

The Recovery

Partition contains

copies of all the

software originally

installed on your

computer.

Before you do a
System Recovery, try
Windows Non­Destructive System
Recovery first. You
may be able to "Roll­back" without needing
to reinstall software.

Option 1

Non-Destructive System Recovery

Non-Destructive System Recovery will recover the original software
to your hard drive without formatting it first. This process preserves
data files on your hard drive but requires you to reinstall any soft­ware not originally on the hard drive.

Steps for Option 1, Non-Destructive System Recovery

1. Turn on your computer. Immediately after the WinBook
logo is displayed, a 5 second countdown message will
appear on the screen as follows: "Press F10 to start
recovery".

2. Press the F10 key before the countdown expires to start
the recovery console.

3. Read the End User Notice concerning the operation of
the recovery software and click on the 'I Agree' button
to continue or the 'I disagree' button to cancel the
recovery process.

4. The recovery process defaults to "Non-Destructive
System Recovery." If this is what you want, press the
"Next" button to continue.

5. The following screen explains that Windows XP has an
option to repair itself by going back to a point where
the operating system was working properly.

This is an option that works well with drivers or other
software programs that may have caused instability in
the operation of Windows, for more information see
the Windows Help file.

6. The next screen displays the status of the recovery
process.

7. After the recovery process has completed, press the
'Restart' button to reboot the notebook into the newly
recovered operating system.

Congratulations you have recovered your system!

Option 2

System Recovery Quick Format

System Recovery Quick Format will first format your hard drive and
all data on the drive will be lost. Again all software not originally
on the hard drive must be reinstalled.

Steps for Option 2, System Recovery Quick Format

1. Turn on your computer. Immediately after the WinBook
logo is displayed, a 5 second countdown message will
appear on the screen as follows: "Press F10 to start
recovery".

2. Press the F10 key before the countdown expires to start
the recovery console.

3. Read the End User Notice concerning the operation of
the recovery software and click on the 'I Agree' button
to continue or the 'I disagree' button to cancel the
recovery process.

4. The recovery process defaults to "Non-Destructive System
Recovery." To perform a "System Recovery-Quick
Format," press the "Advanced Options" button at the left
to continue.

5. The following screen will show that "System Recovery-No
Format" is pre-selected (green arrow) and you must click
on "System Recovery-Quick Format" to begin the process.

Warning: If you choose to continue this option, often
called "Destructive Recovery," it will completely erase
any data on the hard drive and restore software
settings as shipped from the factory.

Press the "Next" button to continue. (Figure A)

6. The following screen explains that Windows XP has
an option to repair itself by going back to a point where
the operating system was working properly. (Figure B)

This is an option that works well with drivers or other
software programs that may have caused instability in
the operation of Windows, for more information see
the Windows Help file.

7. To continue with "System Recovery Quick Format"

press "Yes" button.

This is the FINAL WARNING that all data on the hard
drive will be lost if you continue past this point. To
continue and format the hard drive press the "Yes"
button.

8. The next screen displays the status of the format

process.

9. The next screen displays the status of the recovery

process.

10. After the recovery process has completed, press the

'Restart' button to reboot the notebook into the newly
recovered operating system.

Congratulations you have recovered
your system!

Figure B

Figure A

Limited Warranty

WinBook Corporation, ("WinBook"), warrants to you, the original purchaser, that this WinBook (the "Product") will be free from defects in
materials and workmanship for a period of three full months from the original date of purchase. Should the Product fail to conform with this
warranty during the warranty period, WinBook will repair the Product at no charge.

You may extend the warranty period for an additional nine months at no charge by registering the Product at www.winbook.com/registration
and completing the registration form on-line.

Exclusions

This Limited Warranty does not cover software, batteries, disks or related documentation. WinBook will not be liable for alteration or loss
of software programs, operating systems, or data stored on equipment sent in for repair or upgrade. The Purchaser is advised to back up all
data prior to any servicing of the Product.

Items attached to or installed in the WinBook Computer will be removed at the Technician’s discretion prior to service. WinBook is not
responsible for repairs or testing of non-covered items.

This Limited Warranty covers normal use. Preventive maintenance is not included. WinBook does not warrant and will not be held responsi­ble in any way for damages or loss resulting from a cause other than defects in materials or workmanship, including damage or loss caused
by: neglect, accident, unreasonable use, servicing or modification by anyone other than WinBook or its designee; transit of equipment to
WinBook for service, return or evaluation; any natural disaster, including flood, fire, earthquake, or lightning; or electrical surges or use of
improper power sources.

WinBook’s liability under this Limited Warranty shall be limited solely to repair as provided for above, and WinBook assumes no risk of, and
shall not in any case be liable for, any other damages, including, without limitation, any special, incidental, consequential or punitive dam­ages, arising from breach of warranty or contract, negligence or any other legal theory, including, without limitation, loss of goodwill, prof­its or revenue, loss of use of the Product or any associated equipment, cost of capital, cost of any substitute equipment, facilities or servic­es, downtime costs, or claims of any party dealing with the Purchaser for such damages.

The employees and agents of WinBook are not authorized to make modifications to warranties, or additional warranties binding on WinBook;
accordingly, additional statements, whether oral or written, do not constitute warranties and should not be relied upon by the Purchaser.

The warranties set forth in this warranty statement allocate the risks of Product failure between seller and buyer as authorized by the
Uniform Commercial Code and other applicable law. WinBook’s Product pricing reflects the allocation risk and the limitations of liability
contained in this statement.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL WARRANTIES, OTHER THAN WARRANTY OF TITLE, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OR MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or
consequential damages, so any such limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You also
have other rights which may vary from state to state.

To obtain Service under this Agreement

To obtain service under this Limited Warranty merchandise must be received within three months of purchase and be accompanied by proof
of purchase. If you ship the unit to WinBook for service, WinBook will not be responsible for shipping charges, loss or damage in transit,
shipping containers or packing supplies. You are responsible for all shipping materials should the original packing materials not be available.
The customer must call WinBook Technical Support and obtain an RMA number before the unit can be sent to WinBook.

For Tech Support, please contact WinBook at [phone].
For Customer Support, please contact WinBook at [phone].

www.winbook.com www.winbookcorp.com 1-800-722-4396

Here's what you need to:

Get started with the Quickstart Guide

Recovery Options

Warranty Information

(on the back)

Here's the

Quickstart Guide

to get your new

PC connected fast!

notebook

Getting Started

with the

A Series

3-04 Getting Started

What is the model number of my WinBook notebook computer?

There are two methods for determining the exact model of WinBook that you have purchased.

The first and
easiest method is
to turn the note­book over and view
the model number
printed on the
rating label sticker
on the bottom of
the unit.

The second method is to view the
General System Properties dialog
box within Windows. To access the
system properties window perform
the following steps:

1. ‘Left click’ on the Start Menu
button found in the lower left
hand corner of the display.

2. ‘Right click’ on the My Computer
icon to bring up an action list,
then ‘left click’ on properties
to open up the General System
Properties window.

3. The model number is located
immediately after the series
designator.

561567880021

© 2004 All rights reserved. WinBook is a registered trademarks of Micro Electronics, Inc. All trademarks or registered

trademarks are property of their respective corporations.

Congratulations and thank you
for purchasing your WinBook
notebook.

Follow these easy step-by-step
instructions for quick installation
of your notebook.

Read First

Don’t attempt to install any additional hardware into your new system until
your system has been turned on for the first time and the setup process has
been completed.

Prepare your work space

• Don’t place your computer near a sunlit window. Excessive
heat will shorten the life of a computer.

• Don’t use your computer in areas of excessive dust, humidity
or temperature.

1

Install the battery

2

4

5

Open the display

3

Don’t

• Don’t supply power to the notebook until all cords are connected.

Do

• Save this Quickstart Guide, all manuals, and any other software
CDs for future reference. Save the carton and the packing materials

in case you ever have to store or ship your system.

• Use a quality, UL-approved surge protector or power strip to guard
against power surges.

WARNING

Your WinBook notebook has been designed to be expandable. There are a number of components
that can be installed by the user. Before opening the case, you should be aware that you can
injure yourself and damage your computer if you do not perform the operations correctly. If you
are not comfortable with upgrading components on your own, refer to the Help and Support
Center or have a Service Technician perform upgrades for you.

Finding Help resources

6

Don’t

For help with any questions about your WinBook notebook or
Windows XP, refer to the Help and Support Center within Windows.

Additional assistance can be found at www.winbookcorp.com

Using the Help and Support
Center

Obtaining access to the Help and
Support Center is just a key press
or mouse click away. From the
Windows desktop, press the [F1]
key in order to bring up the Help
and Support Center. Alternatively
you can click once on the Start

Menu and then select Help and
Support.

The battery should be installed
before starting your notebook for the
first time. Remove the battery pack
from the accessories box and install
it into the system by following these
instructions:

• Carefully turn the unit upside
down.

• Line up the battery for insertion
into the battery bay channel.

• Gently slide the battery towards
the center of the unit until an
audible click indicates that the
latches have been secured.

• Locate the display latch on the front of the notebook.

• Slide the display latch to the right and raise the panel.

• Adjust the display to a comfortable viewing angle.

Connect the AC Adapter

The first time you use your WinBook
notebook, use the AC power adapter to
fully charge the battery.

• Connect the power cable to the AC adapter.

• Connect the AC adapter to the DC-IN jack of the notebook.

• Connect the plug end of the power cable to an electrical outlet.

Power up and Windows XP setup

Locate the power button above the
keyboard. Press and hold the power
button until the power light comes on.

Windows XP setup

Follow the screen prompts for setting
up Windows XP.

Latch

A Series Battery

Power
Button