Winbond Electronics W88631F, W88611P Datasheet

VCD 4X RF AMP/DIGITAL SERVO & DSP
W88611P
GENERAL DESCRIPTION
FEATURES
RF amplifier, tracking error amplifier, focus error amplifier, APC circuit, and reference amplifier included on a single chip
Single 5V power supply
32-pin PLCC package
W88611P/W88631F
Wide data capture range (+/- 1.5 channel clock, up to 4X speed)
Wide frame jitter margin (+/- 4 frames) with built-in deinterleaved SRAM
EFM protected demodulator
Digital spindle motor control by CLV
Error correction capabilities
Subcode data processing
Audio data processing, Concealment strategy, digital attenuation and soft mute
Audio data output interface
--- standard EBU digital audio output interface
--- D/A converter interface and CD-ROM interface
Extended general I/O port simplifies system design
100-pin QFP package
APPLICATIONS
W88631F
GENERAL DESCRIPTION
W88631F provides CD signal processing decoding functions and all servo functions needed in a three-spot CD system. This chip has a high degree of integration to reduce the number of external components required.
FEATURES
1X, 2X and up to 4X speed modes are supported
Chip clock 33.8688 MHz
Serial microcomputer interface
Fully digital servo processing (focus, tracking, sledge, spindle servo)
Fully automatic adjustment (focus / tracking gain, offset, balance)
Wide range of adjustable servo characteristics possible
Built-in access procedure
Focus automatic start up
Trackloss, Shock, Defect, Dropout detection
Fully digital data recovery (digital equalizer, data slicer, PLL)
VCD player
SVCD player
Multimedia system
Following figure shows a typical VCD/SVCD connection diagram of W88611P/W88631F
Sony KSS213
Servo Board
Digital Servo & DSP W88631F
RF Amplifier W88611P
Motor Driver
VCD/SVCD MPEG Board
•MPEG Decoder
•MCU
•TV Encoder
•Audio DAC
Winbond Corporate Headquarters Taipei Sales Office Winbond Electronics North America Corp. Winbond Electronics H.K. Ltd.
Tel : 886-3-5790666 Tel : 886-2-27190505 Tel : 1-408-943666 Tel : 852-27513100 Fax : 886-3-5796139 Fax : 886-2-27197502 Fax : 1-408-9436668 Fax : 852-27552064
Details are subject to change without notice. All trademarks are property of their respective holders. Jan 1999
Loading...