Winbest Premiere Edition User Manual

www.barska.com

WINBEST® by BARSKA®, as manufacturer, warrants this new product to be free of original defects in
materials and/or workmanship for the length of time specified by this warranty. This warranty does not
include damage caused by abuse, improper handling, installation, maintenance, normal wear-and-tear,
unauthorized repairs or modifications and tampering in anyway.

This warranty is limited to the original purchaser and is not transferable. This warranty applies only to
products purchased in the United States of America.

In the event of a defect within 30 days, the consumer must return the defective unit to the WINBEST

®

by BARSKA

®

dealer (the place of purchase) at his/her own expense.

Beyond 30 days, WINBEST

®

by BARSKA® products should be sent to the following address for
warranty repairs. Products must be packed carefully and sturdily to prevent damage in transit, and
returned freight prepaid to:

WINBEST

®

by BARSKA

®

855 Towne Center Drive

Pomona, CA 91767

For additional and updated information

please visit www.barska.com

Please email [e-mail] or call 1.888.666.6769 for Return Merchandise Number (RMA#) before
any returns.
NOTE: All merchandise received without a valid RMA# will be returned to shipper at his/her own
expense.

Please include all of the following when returning WINBEST

®

by BARSKA® products for service and/or

replacement:

1. Please write your complete details (Name, Address, Telephone #, E-mail address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect

4. A Check/Money Order of $35.00 to cover inspection, shipping and handling
*Please allow 6-8 weeks for delivery

This product will either be replaced or repaired at the discretion of the warrantor. If it's a discontinued
item, we will replace the product with an equivalent product. Should the repair not be covered by this
warranty, an estimate will be sent for your approval. Non-warranty repairs or refurbishing are always
provided at a reasonable cost.

WINBEST

®

by BARSKA® shall not be liable for any consequential, incidental and/or contingent
damages whatsoever. We will not pay shipping, insurance or transportation charges from you to us, or
any import fees, duties and or taxes.This warranty supersedes all previous Winbest

®

by BARSKA

warranties.

© 2016 BARSKA

®

11/16BC318

Metal Detector

1 YEAR LIMITED WARRANTY

by

Premiere Edition

Metal Detector

Easy to Use

Automatic tuning and ground balancing

LED Indicator

Flashes red when a target is detected

Submersible Detector

100% Waterproof works in fresh and
salt water up to 32.8 feet/ 10 meters

www.barska.com

0

1

2

3

4

10

9

8

7

6

5

DISCRIMINATION

UNDERWATER

METAL

DETECTOR

SENSITIVITY

BATTERY TEST

VOLUME

0

1

2

3

4

10

9

8

7

6

5

POWER OFF

0

1

2

3

4

10

9

8

7

6

5

BC507 11/16

TREASURE HUNTER’S CODE OF ETHICS

A few basic rules you should follow while using your detector

- Always get permission before searching any site

- Respect the rights and property of others

- Observe all national,state and local laws when treasure hunting

- Never destroy historical or archaeological treasures. If you are
not sure about an object you have found, contact a museum or
historical society in your area.

 -Leavethelandandvegetationasis,andllinanyholesyoudig.

- Use the detector only in safe areas

 -Disposeofanyjunkyoumaynd,onlyinapprovedareas.Donot
leaveitforthenexttreasurehunternd.

PARTS OF THE METAL DETECTOR

Search

Coil

Lock

Knob

Cable

Control

Box

Battery

Compartment

Handle

Arm

Support

Stem

Coil

Knob

Control

Panel

ASSEMBLY

Only a few adjustments are needed and requires no tools.

Insert Rod to
Join Together

Coil

Knobs

1. Insert stem into lock knob.

2. Adjust the stem to the appropriate length. To extend or retract the
lower stem, loosen the lock knob clockwise and pull or push in the
lower stem to desired length. Then, turn counter clockwise to tighten
the lock knob in place.

3. Adjust the search coil to the scanning position. If necessary, loosen
the coil knob and then tighten coil knob.

Notes:

2

www.barska.com

3

www.barska.com

Treasure Hunter’s Code of Ethics 3

Parts of the Metal Detector 3

Assembly 4

Batteries 4

Checking Battery Levels 4

Control Panel 5

Sensitivity 5

Discrimination 6

Using the Metal Detector 7

On Land 7

Underwater 7

Search Coil Sweeping Hints 7

Search Coil Positioning 7

Ultra Slow Motion 8

Audio Pitch 8

Correct Arm Position 8

Pinpointing a Target 8

Using Headphones 9

Care and Maintenance 9

Warranty 10