Win Accord PTT826D User Manual

winaccord

Personal T o uch Tablet

Preliminary Spec

2012-08-22

- 1 -

Table of content

Ⅰ- GETTING STARTED

Important Safety Precautions 3
Cleaning the Panel 3
Cleaning the Personal Touch Tablet 3
Introduction 4
Buttons Overview 5
Accessories 5
What’s in the Box 6
Charging the Battery 6
Power On/Off and Unlock Personal Touch Tablet 6

Ⅱ-FUNCTIONING OF THE TABLET

Navigation 7
Home Screen 7
Application Launcher Screen 7
Status Bar 8
Onscreen Keyboard 9

Ⅲ- SETTINGS

Set Up Wi-Fi Connection 10
Set up 3G Function (optional) 10
Set Date and Time 11
Set Up Email 12
Set Up Calendar 13
Widgets 14
Change Wallpapers 14
Use folders 14

Install Third-Part Applications from micro SD 15

Ⅳ- CONNECTIONS

Browser 16
Wi-Fi 17
Bluetooth 17
PC Connection 18
Connect to TV set (optional) 19

Ⅴ- APPLICA TIONS

Camera 20
Clock 21
Calculator 22

Downloads 23
Gallery 24
Music 25
MoviePlayer 26

File Browser 27

Ⅵ-PRODUCT SPECIFICATION 28
Ⅶ FCC Statement

- 2 -

Ⅰ- GETTING STARTED
Important Safety Precautions

Always follow these basic safety precautions when using your Personal Touch Tablet.
This will reduce the risk of fire, electric shock and injury.

Warning: To reduce the risk of fire of shock hazard, do not expose this product to rain

or water.

Warning: To prevent the risk of electric shock, do not remove the cover. There are no

user-serviceable parts inside. Opening will void your warran ty.

● Unplug the Personal Touch Tablet before performing maintenance.

● Keep your Personal Touch Tablet out of direct sunlight and heat sources.

● Protect the power cord. Route power cords so that they are not likely to be walked on

or pinched by items placed on or against them. Pay particular attention to the point

where the power cord is attached to the Personal Touch Tablet.

● Only use the AC adapter included with the Personal Touch Tablet. Using any other

power adapter will void your warranty.

● Unplug the power cord from the outlet when the unit is not in charging condition.

Cleaning the Panel

Treat the screen gently. The screen is made of glass and can be scratched or broken.
To clean fingerprints or dust from the screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the screen.
If you use a commercial Cleaning Kit, do not apply the cleaning liquid directly to the
screen. Clean the screen with cleaning cloth moistened with the liquid.

Cleaning the Personal Touch Tablet

Clean the outer surface of the Personal Touch Tablet (excluding the screen) with a soft
cloth dampened with water.

- 3 -

Introduction

Welcome to the Personal Touch T ablet! The Personal Touch Tablet includes these key
features:

● Displays Alarm, AppInstaller, Browser , Calculator, Calendar, Camera, Clock, Email,

File Browser, Gallery, HDMI Switch, Music, Setting, Video Player and etc

● Displays digital photos, Play Music and Video

● Wi-Fi function to connect with your AP router for internet browsing

● Micro Secure Digital™ (micro SD) slot for external storage

● Capacitive touch screen for all user operations

● 4GB Internal Memory

● USB2.0 OTG for connection to the PC or USB flash drive

- 4 -

Buttons Overview

Accessories

Power Adapter (depending on the regional requirement, the plug may look different)

USB Cable

- 5 -

What’s in the Box

Personal T o uch Tablet
AC Power Adapter (5V/2A)
USB Cable
Quick Start Guide

Charging the Battery

Plug the AC power adapter into the Personal Touch T ablet and into a wall outlet.
Icon

will turn to icon while the battery is charging.

When charging is completed, the battery icon will turn into a steady blue.

* It is strongly recommended you fully charge the device for about 4-6 hours before use.
* When charging battery, the better indicator for a fully charged battery is a steady blue

battery icon on the notification bar. icon means the battery is still being charged,
even when 100% has been displayed for battery level on the Settings → About tablet→

Status screen.

Power on/off and Unlock Personal Touch Tablet

The Personal Touch Tablet is easy to set up. Just follow these steps:

1. To power on: Press and hold Power button for 2 seconds.

2. To unlock: Wait until a screen with a lock icon shows up, gently tap the “Lock” icon

and slide it toward the unlock icon.

3. To power off: Press and hold the Power button for 2 seconds until “Power off”

window pops up on screen where you can choose OK option to power off the device.

4. T o reset：Press the power button for 6 to 8 seconds.

Note: The screen with the lock icon will time out in 10 seconds if you do not unlock it.

In case it happens, the Power button can be pressed briefly to make it show up
again.

- 6 -

Ⅱ- FUNCTIONING OF THE TABLET

Navigation

Tablet has five home screens by default. The first time you turn on the tablet or after
having factory data reset, you will see a navigation screen.
* To see all you applications, touch inside the circle.
* You can put your favorite applications on Home screen.

Home Screen

A typical Home screen with wallpaper, status bar, and few applications on the screen.

* The background wallpaper may be different from model to model

◆ A shortcut to Google search

◆ A shortcut to application Launcher screen.

Application Launcher Screen

A typical application Launcher screen is shown below. One icon represents one
application which can be run by tapping on the icon.

*The screen icon may be different from model to model

- 7 -

Status Bar

At the bottom of the screen, the status bar mainly indicates Back icon, Home icon,
Recent viewed applications icon, Current time, Wi-Fi status, 3G status, Bluetooth
status and battery level, etc.

Icon Action

On any functional screen, tap this icon to go back one screen or

/

exit application.
On any functional screen, tap this icon to go to Home screen

Shows a list of thumbnail images of applications you’ve work
with recently. To open an application, touch it. To remove a
thumbnail from the list, swipe it left or right.
Current time
Wi-Fi connection and signal strength
Shows 3G signal status (optional)
Shows Bluetooth status

Battery level. Will turn orange when battery is low and turn red
when battery is very low.

Onscreen Keyboard

The onscreen keyboard appears automatically anytime you tap on a text line for input.
While entering text with the onscreen keyboard, each character will be entered into
the position pointed by a vertical cursor. You can change the cursor position by
tapping with your finger on the position you want to enter the next character. To
select different language keyboard, touch and hold icon

.A pop menu will show up

to let you select the “Input Options”

- 8 -

*Setting up an International keyboard: see “Install Third-Part Applications from

micro SD” section.

- 9 -