Win Accord PTT726A Users Manual

winaccord

Personal Touch Tablet/MID

Preliminary Spec

2011-09-30

- 1 -





Table of content

- GETTING STARTED

Important Safety Precautions 3
Cleaning the Panel 3
Cleaning the Personal Touch Tablet 3
Introduction 4
Buttons Overview 5
Accessories 5
What’s in the Box 6
Charging the Battery 6
Power On/Off and Unlock Tablet 6

-FUNCTIONNING OF THE TABLET

Navigation 7
Home Screen 7
Application Launcher Screen 7
Status Bar 8
Onscreen Keyboard 9

- SETTINGS

Set Up Wi-Fi Connection 10
Set up 3G Function
Set Date and Time 11
Set Up Email 12
Set Up Calendar 13
Create Shortcuts on Home Screen 14
Create Widgets on Home Screen 14
Change Wallpapers 14

Install Third-Part Applications from micro SD 15

- CONNECTIONS

Browser 16
Wi-Fi 17
Bluetooth 17
PC Connection 18
Connect to TV set (optional) 19

- APPLICATIONS

Camera (optional) 20
Clock 21
Calculator 22

Downloads 23
Gallery 24
Music 25
Video Player 26

File Browser 27



- LICENCE NOTICE AND TRADEMARK ACKNOWLEDGEMENT 28



-PRODUCT SPECIFICATION 29

- 2 -

- GETTING STARTED

Important Safety Precautions

Always follow these basic safety precautions when using your Personal Touch Tablet.
This will reduce the risk of fire, electric shock and injury.

Warning: To reduce the risk of fire of shock hazard, do not expose this product to rain

or water.

Warning: To prevent the risk of electric shock, do not remove the cover. There are no

user-serviceable parts inside. Opening will void your warranty.

 Unplug the Personal Touch Tablet before performing maintenance.
 Keep your Personal Touch Tablet out of direct sunlight and heat sources.
 Protect the power cord. Route power cords so that they are not likely to be walked on

or pinched by items placed on or against them. Pay particular attention to the point

where the power cord is attached to the Personal Touch Tablet.
 Only use the AC adapter included with the Personal Touch Tablet. Using any other

power adapter will void your warranty.
 Unplug the power cord from the outlet when the unit is not in charging condition.

Cleaning the Panel

Treat the screen gently. The screen is made of glass and can be scratched or broken.
To clean fingerprints or dust from the screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the screen.
If you use a commercial Cleaning Kit, do not apply the cleaning liquid directly to the
screen. Clean the screen with cleaning cloth moistened with the liquid.

Cleaning the Personal Touch Tablet

Clean the outer surface of the Personal Touch Tablet (excluding the screen) with a soft
cloth dampened with water.

- 3 -

Introduction

Welcome to the Personal Touch Tablet! The Personal Touch Tablet includes these key
features:

 Displays Alarm, AppInstaller, Browser, Calculator, Calendar, Camera, Clock, Email,

File Browser, Gallery, HDMI Switch, Music, Setting, Video Player and etc

 Displays digital photos, Play Music and Video
 Wi-Fi function to connect with your AP router for internet browsing
 Micro Secure Digital™ (micro SD) slot for external storage
 Capacitive touch screen for all user operations
 4GB Internal Memory
 USB2.0 OTG for connection to the PC or USB flash drive

- 4 -

Buttons Overview

Accessories

Power Adapter (depending on the regional requirement, the plug may look different)

- 5 -

USB Cable

What’s in the Box

Personal Touch Tablet
AC Power Adapter (5V/2A)
USB Cable
Quick Start Guide

Charging the Battery

Plug the AC power adapter into the Personal Touch Tablet and into a wall outlet.

Icon will be turn flashing with charging sign while the battery is charging.

When charging is completed, the battery icon will turn into a steady green.

* It is strongly recommended you fully charge the device for about 4-6 hours before use.
* When charging battery, the better indicator for a fully charged battery is a steady green
battery icon on the notification bar. A flashing battery icon means the battery is still
being charged, even when 100% has been displayed for battery level on the Settings 
About deviceStatus screen.

Power on/off and Unlock Personal Touch Tablet

The Personal Touch Tablet is easy to set up. Just follow these steps:

1. To power on the device, press and hold Power button for 2 seconds to turn on tablet.

2. Wait until a screen with a lock and speaker icon show up, gently tap the “Lock” icon

and slide it toward the speaker icon to unlock tablet.

3. To power off the device, press and hold the Power button for 2 seconds until a MID

options message show up on screen where you can choose Power off option to power
off the device.

Note: The screen with the lock icon will time out in 10 seconds if you do not unlock it.

In case it happens, the Power button can be pressed briefly to make it show up
again.

- 6 -

- FUNCTIONNING OF THE TABLET

Navigation

Tablet has five home screens by default. You can tailor shortcuts or widgets to home
screen to fit your needs by using Add to Home screen function. For more information,
refer to “Create Shortcuts on Home Screen” on page 14.

Home Screen

A typical Home screen with wallpaper, status bar, and few applications at the bottom.

* The background wallpaper may be different from model to model

 A shortcut to browser

 A shortcut to application Launcher screen.

 A shortcut to system Settings

Application Launcher Screen

A typical application Launcher screen is shown below. One icon represents one
application which can be run by tapping on the icon.

- 7 -

Wi-Fi connection and signal strength

Battery level. Will turn orange when battery is low and turn red
Current time

Volume down

*The screen icon may be different from model to model

Status Bar

On the top corner of the screen, the status bar mainly indicates Home icon, Wi-Fi
status, battery level, current time and volume, etc.

Icon Action

On any functional screen, tap this icon to go to Home screen

Shows the status of micro SD (this icon shows micro SD is
removed.)

Shows 3G signal status (optional)

when battery is very low.

Volume up
On any functional screen, tap this icon to go back one screen or
exit application.
Tap this icon to open a contextual menu screen. The available
options will vary, depending on what application is running on
the screen.

- 8 -

Onscreen Keyboard

The onscreen keyboard appears automatically anytime you tap on a text line for input.
While entering text with the onscreen keyboard, each character will be entered into
the position pointed by a vertical cursor. You can change the cursor position by
tapping with your finger on the position you want to enter the next character. To
select different language keyboard, touch and hold the text line. A pop menu will
show up to let you select the “Input Method”

*Setting up an International keyboard: see “Install Third-Part Applications from

micro SD” section.

- 9 -

- SETTINGS

Set Up Wi-Fi Connection

Make Wi-Fi Connection In Settings ! Wireless & networks ! Wi-Fi

Settings, check on the Wi-Fi to turn on the Wi-Fi.

Normally, the device will automatically scan the available Wi-Fi Access Point (AP).
If this does not happen, press Menu (upper right corner icon in the Status bar) and
select Scan to scan for the available Wi-Fi APs. Then, tap on the desired AP to make
the connection. If it is a secured AP, system will prompt you for the password. Enter
it by tapping on the password entry line, and use the onscreen keyboard to enter the
password. Then, tap on the Connect to start connecting to that AP.

When connection is established, the Wi-Fi connected icon will show up on the

status bar.

Set up 3G Function (Optional)

1. In Mobile networks of Wireless & network settings, make sure the Date enabled is

checked on before you connect to the mobile network.

2. To enable 3G function of your Personal Touch Tablet, insert a SIM card to the

Personal Touch Tablet. After power on, it will search for 3G signal automatically.

3. When connection is established, the 3G connected icon will show up on the

status bar.

4. In Access Point Names, select your favor APN.

- 10 -