Win Accord OR6222 7DW User Manual

Table of Contents

Table of Contents…………………………………………………………..2

Important Safety Precautions.......................................................3

Cleaning the LCD Screen………………………………………........3

Cleaning the Digital Picture Frame………………………………....3

What's in the Box…………………………………………………………...4

Identifying the Parts…………………………………………………..4

Replacing Remote Control Battery………………………………….5

Product Specification……………………………………………………...6

Features………………………………………………………………...6

Specification…………………………………………………………...6

Using the Digital Picture Frame……………………………………….....7

Select Mode…………………………………………………………….7

Card Selection………………………………………………………....7

Photo…………………………………………………………………….8
Music…………………………………………………………………….8

Video…………………………………………………………………….9

File Management……………………………………………………...9

Time…………………………………………………………………....10

Frequently Asked Questions…………………………………………....11

Important Safety Precautions

Always follow these basic safety precautions when using your Digital Picture Frame.
This will reduce the risk of fire, electric shock, and injury.

Warning: To reduce the risk of fire or shock hazard, do not expose this

product to rain or moisture.

Warning: To prevent the risk of electric shock, do not remove the cover.

There are no user-serviceable parts inside. Refer all servicing to

qualified personnel.

 The Digital Picture Frame is for indoor use only.

 Unplug the Digital Picture Frame before performing care and maintenance.

 Do not clock the ventilation holes on the back of the Digital Picture Frame at
any time.

 Keep your Digital Picture Frame out of direct sunlight and heat sources.

 Protect the power cord. Route power cords so that they are not likely to be
walked on or pinched by items places on or against them. Pay particular
attention to the point where the cord attaches to the Digital Picture Frame.

 Only use the AC adapter included with the Digital Picture Frame. Using any
other power adapter will void your warranty.

 Unplug the power cord from the outlet when the unit is not in use.

Cleaning the LCD Screen

Treat the screen gently.

To clean fingerprints or dust from the LCD screen, it is recommended to use
a soft, non-abrasive cloth such as a camera lens cloth to clean the LCD screen.

If you use a commercial LCD cleaning kit, do not apply the cleaning liquid
directly to the LCD screen. Clean the LCD screen with cleaning cloth
moistened with the liquid.

Cleaning the Digital Picture Frame

Clean the outer surface of the Digital Picture Frame (excluding the screen) with a
soft cloth dampened with water.

3

What's In the Box

Digital Picture Frame
Power Adapter
Remote Control
USB Cable
User's Manual

Identifying the Parts

DIGITAL PICTURE FRAME

4

SETUP