Table of Contents
Table of Contents……………………………………………………..……………………….....2
Important Safety Precautions………………………………………..……………………….…3
Cleaning the LCD Screen................................................................................................…..3
Cleaning the Digital Picture Frame................................................................................. …3
What’s in the Box…………………………………………………………………………….. ...4
Identifying the Parts……………………………………………………………………......4
Replacing Remote Control Battery……………………………………………………........5
Product Specification……………………………………………………………………….........5
Features……………………………………………………………………………......…....5
Specification…………………………………………………………………………….......6
How to Use Your Digital Picture Frame……………………………………………………......6
Turning On and Off…………………………………………………………………….......6
Connecting to PC……………………………………………………………………….......6
Function Select Screen…………………………………………………………………......7
Photo…………………………………………………………………………………….......7
Slideshow Mode……………………………………………………………………….7
Thumbnail Mode…………………………………………………………………........7
Single View Mode…………………………………………………………………......7
Video…………………………………
Music…
Calendar……………………………………………………………………………….........9
Monthly Calendar…………………………………………………………………......9
Calendar………………………………………………………………………….......10
Clock…………………………………………………………………………………10
File Manager…………………………………………………………………………........11
Setting………………………………………………………………………………….......11
System Setup………………………………………………………………………....11
Photo Setup……………………………………………………………………….......11
Calendar Setup……………………………………………………………………......11
Video Setup………………………………………………………………………..….11
Music Setup………………………………………………………………………......11
…………………………………………………………………………………......9
………………………………………………….......8
About EzDisplay (Optional) ………………………………………………………………........12
Install the Program………………………………………………………………......................12
Install Device Driver………………………………………………………………....................16
Program working and operating…………………………………………………………..........17
Use of application program………………………………………………………......17
Program status……………………………………………………………………......19
Frequently Asked Questions……………………………………………………………...........20
2
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Picture Frame. This
will reduce the risk of fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or
Warning: To prevent the risk of electric shock, do not remove the cover. There are no
moisture.
user-serviceable parts inside. Refer all servicing to qualified personnel.
The Digital Picture Frame is for indoor use only.
Unplug the Digital Picture Frame before performing care and maintenance.
Do not clock the ventilation holes on the back of the Digital Picture Frame at any time.
Keep your Digital Picture Frame out of direct sunlight and heat sources.
Protect the power cord. Route power cords so that they are not likely to be walked on
or pinched by items places on or against them. Pay particular attention to the point
where the cord attaches to the Digital Picture Frame.
Only use the AC adapter included with the Digital Picture Frame. Using any other
power adapter will void your warranty.
Unplug the power cord from the outlet when the unit is not in use.
Cleaning the LCD Screen
Treat the screen gently.
To clean fingerprints or dust from the LCD screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the
LCD screen. Clean the LCD screen with cleaning cloth moistened with the liquid.
Cleaning the Digital Picture Frame
Clean the outer surface of the Digital Picture Frame (excluding the screen) with a soft cloth
dampened with water.
3
What’s in the Box
Digital Picture Frame
Stand
Power Adapter
Remote Control
USB cable
User’s Manual
Identifying the Parts
POWER SWITCH
SD/MMC/MS SLOT
MANUAL
LEFT
IR
Copy / Delete
SLIDE SHOW
Zoom In
EXIT
ROTATE
STOP
MINI USB
DC 5V
USB HOST
EXIT
RIGHT
ENTER
INDICATOR
SETUP
SLEEP
Copy / Delete
Volume Control
Direction Buttons
ENTER
4
Replacing Remote Control Battery
p
If the remote control stops working or works improperly, replace the battery (CR2025 lithium
battery) with a new one.
1. Pull out the battery holder.
2. Remove the old battery from the holder and then put a new battery with “+” facing
up.
3. Insert the battery holder back to the remote control.
Warning
Battery may explode if mistreated. Do not recharge,
disassemble or dis
ose of in fire
Notes
When the lithium battery becomes weak, the operating distance of the Remote Control may shorten, or
the Remote Control may not function properly. In this case, replace the battery with a CR2025 lithium
battery. Use of another battery may present a risk of fire or explosion.
Dispose the used batteries as specified by the local authorities.
Do not leave the Remote Control in a very hot and humid place.
Incorrect use of the battery may cause leaking and corrosion.
- When the Remote control will not be used for a long period of time, remove the battery from
the remote control to prevent leaking and corrosion.
- Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire
may cause the battery to rupture and leak.
Product Specification
Features
Supports JPEG image formats
Zoom in, background music, and auto-slideshow with effects
Displays digital clock, calendar, and analog clock
Auto-Crop
Auto-Resize
Supports USB update
5
Specification
Product 8DN Libra Digital Photo Frame
Resolution 800x600 pixel
Memory Card
Formats
Image Formats JPEG
Audio Formats MP3
Video Formats Motion JPEG
Sub-Display Optional
USB Ports USB 2.0 (Host) x 1, mini-USB x 1
Power Input AC 100V~240V, 50~60Hz
Power Output DC 5V / 1.5A
Internal
Speakers
Certification CE / FCC / RoHS
Secure Digital™, Multi-Media Card™, Memory Stick™,
Memory Stick Pro™, Memory Stick Duo™, Memory Stick Pro
Duo™ and USB flash drives
0.5W x 2
How to Use Your Digital Picture Frame
Turning On and Off
To turn the Digital Picture Frame on, just simply plug the AC adapter to a wall
outlet and the Digital Picture Frame then switch the POWER switch to ON position
or press the POWER button, and the system will shows the Function interface. *
To turn off the Digital Picture Frame, just switch the POWER switch to OFF
position or press and hold the POWER button until the screen is blackened. *
* The power switch or the power button may vary from different models.
Connecting to PC
At any time connecting the Digital Picture Frame to the PC, it will enter USB mode. The
screen will show the message “connecting to PC”. In USB mode, the Digital Picture Frame
functions as a USB flash drive. To exit USB mode, simply unplug the USB cable or press
ESC key.
6
Function Select Screen
The Digital Picture Frame will enter the Mode Selection Screen when powered on. (The screen
may vary from different models)
Storage type: built-in memory, memory
cards, or USB massive storage device
Feature Options
If there is no any operation for 8 seconds in the Mode Selection Screen, the Digital Picture Frame
will start the slideshow automatically.
Photo
Slideshow Mode: the images are displayed one by one. Pressing the SLIDESHOW
button will start the slideshow. You can setup the display duration, effects, and image
display ratio in the Setup menu by pressing SETUP button on the remote control. While
playing slideshow, press ENTER to switch from “Slide with music” and “Slide photo
only”.
Thumbnail Mode: the screen is split to 2 portions; the left portion shows the
thumbnails and the right portion displays the image information (image name,
resolution, file size, image created date…etc)
Single View Mode: select the desired image in Thumbnail mode and press ENTER to
display the image in full screen. The image will be displayed constantly. Press
LEFT/RIGHT button on the remote control to view last/next image, or press ESC/Exit
7
to return to Thumbnail Mode.
noitcnuF nottuB
ENTER Slideshow start/slideshow music on(off)
STOP Exit to thumbnail
EXIT Exit to thumbnail
COPY/DELETE Copy/Delete photos
Video
Select Video in Function Select Screen will show the video file list.
File List File Information
Press ENTER to play the video file.
While playing the video, the playing time and the video length are shown at the bottom.
8
noitcnuF nottuB
tsil elif ot tixE TIXE
drawkcaB TFEL
drawrof tsaF THGIR
yalP / esuaP RETNE
oediv eht potS POTS
Music
Select Music in Function Select Screen and the screen will show the music file list.
Use UP and DOWN buttons to select the file.
Press ENTER to play the music.
Calendar
There are 3 display modes: Monthly Calendar, Calendar, and Clock.
A. Monthly Calendar
The slideshow runs at right side
noitcnuF nottuB
EXIT Exit to Function Select Screen
egami tsaL TFEL
egami txeN THGIR
htnom tsaL PU
htnom txeN NWOD
9
B. Calendar
The slideshow runs at right side
EXIT Exit to Function Select Screen
C. Clock
noitcnuF nottuB
egami tsaL TFEL
egami txeN THGIR
htnom tsaL PU
htnom txeN NWOD
noitcnuF nottuB
EXIT Exit to Function Select Screen
htnom tsaL PU
htnom txeN NWOD
10
File Manager
In Function Select Screen, select File Manager then press ENTER; the file list shows.
noitcnuF nottuB
EXIT Back to upper folder / Exit to Function Select Screen
elif drawpu eht tceleS PU
DOWN Select the downward file
COPY/DELETE Copy/Delete Files
mrifnoC RETNE
Setting
In Setting, you can setup the system, photo, calendar, video and music.
In the sub-setup menus, you can use below keys to change the settings.
noitcnuF nottuB
EXIT Back to upper folder / Exit to Function Select Screen
UP Select the upward setting
RIGHT Select the downward setting
LEFT/RIGHT
Change setting value
A. System Setup
Here you can adjust Backlight, Brightness, Gamma, Hue, Language, Auto-Power On/Off,
Auto-Power Frequency, and Reset.
B. Photo Setup
Here you can change the photo Display Mode, Display Ratio, Slideshow Duration, Slideshow
Effect, Slideshow Repeat, Clock, Resize, Cut Out When Copy, and Show Tip When Copy.
C. Calendar Setup
Here you can change the calendar Display Mode, adjust Date, Time, and Clock Mode, and set
Alarm.
D. Video Setup
Display Mode and Play Mode can be modified here.
E. Music Setup
Music Effect and Play Mode can be modified here.
11
About EzDisplay (Optional)
EzDisplay is a PC software based on Windows (Windows XP™, Windows Vista™), with rich
functions and Easy to use. EzDisplay will make your DPF serve as a second monitor (Sub-Display) of
your PC or Laptop. EzDisplay supports Unicode and Multi-Language according to your OS
configuration.
1. Install the Program
Double-click the icon of Ezdisplay Setup.exe to install program, see as following:
Step1
Step2
1212
Step3
Step4
13
Step5
Step6
14
Step7
Step8
Plug DPF and connect device to the PC when above showed, then click “OK”. It will
automatically install device driver.
Note: Installation accomplished, the program file will be added a new item “Ez Display”
as following:
15
2. Install Device Driver
During installation, it needs two driver programs which are SubVGA driver (As
figure Step9 signs :reset the PC) and USB device driver(Automatically search the
program and unnecessary restart PC once USB device driver was connecting )
a. The SubVGA driver serves for external display (DPF as secondly monitor). You would
find the “Cordon Sub-Display” in the desktop “Attribute”-“Settings”-“Display”. As
following：
NOTE : Selected the “（Default Monitor） on Cordon Sub-Display”, then click the
“Extend my Windows desktop onto this monitor.”, click “OK” and quit. Afterwards, DPF
will display the same desktop of the PC under the Display mode (not excluding desktop
icon). In case of blank screen is showing on DPF, please check if the item was selected.
Only under the particular situation: It needs quit the system if available for selecting, but
it is unworkable.
b.
Install USB device driver is for getting through the connection by PC and DPF. Please
make correct connection of DPF and PC, and the driver can be well installed.
16
3. Program working and operating
3.1. Use of application program
At main menu of DPF, select “Setting” item then click “Enter” to move to “Start up
Setting”(Or click “Setup” of the remote control to enter “Start up Setting”).Use up/down
to select “System setup”, click “ENTER”, select the item “PC/MAC Connection” where
are three options at this step(Left/Right for choosing) .
A. Mass Storage: Select this function, DPF will become a memorizer after USB
connected to PC.
B. Display: Select this function, DPF will be an external display (DPF as secondly
monitor).
NOTE:The Automatic run function of PC should keep working, then enter into
STAR--RUN--Input gpedit.msc to go to Group Policy to check the setting, see as following:
Figure
1（notice the red part）
Figure 1
17
Click the right button of the mouse, see as following:
Figure 2
Choose “Attribute”- click the left button of the mouse, see as following:
Figure 3
18
NOTE: If Automatic run function of PC was not setting, it needed to click "EZ
Display" to display by hand per once connect to the PC.
C. ALWAYS ASK : Setup this function, once DPF is connecting to PC, there will be
a questioning icon, click "up or down" to go to Mass Storage or external display mode
(DPF as secondly monitor).
3. 2．Program status
During the Program is running, only a small icon would be shown at the Taskbar's
left side with two status: disconnecting or connecting.See as following :
Status of disconnecting
Status of connecting
19
Frequently Asked Questions
Q: How do I set up my Digital Picture Frame?
A: It is very simple to get you Digital Picture Frame out of the box and running in just a few
minutes. Just plug the power adapter into the Digital Picture Frame and into a standard wall
socket. Insert a memory card into the appropriate card slot on the side of the Digital Picture
Frame and turn it on. Your first slideshow will automatically start to play.
Q: What memory cards can the Digital Picture Frame read?
A: Compatible memory cards include Secure Digital™, Multi-Media Card™, Memory Stick™,
Memory Stick Pro™, Memory Stick Duo™, and Memory Stick Pro Duo™.
Q: I set up the Digital Picture Frame; why does it not turn on?
A: The adapter may be not securely connected to the Digital Picture Frame or wall socket, or
the Power Switch
Digital Picture Frame and the wall socket.
Q: I have a memory card in the Digital Picture Frame; why can’t I view my photos?
A: First, check whether the memory card is one of listed above and the images are one of the
formats listed in the Specification on page 6 . Second, turn the Digital Picture Frame off
and make sure that the memory is inserted all the way into the card slot and is facing the
correct direction. Third, turn the Digital Picture Frame on, you should see the Function
Select Screen. Press EXIT and the yellow Built in Memory icon on the right side enlarges.
Press DOWN button and the SD icon enlarges and become yellow. Press ENTER to choose
Photo, the slideshow starts(factory default).
may not be on. Please check if the adapter is properly plugged to the
Note: Some digital cameras save images in other formats. Please refer to your camera’s manu
your photo format is not listed in the specification.
Q: Why is the picture display slower with some pictures and faster with others?
A: Higher resolution pictures will be loaded slowly. Try to use lower resolution pictures or
down sampling your images. See your camera’s operating manual for details on downsizing
your photos.
Q: Does the Digital Picture Frame support all JPEG files?
A: No. The Digital Picture Frame supports the JPEG files taken by a digital camera. It may not
read all images files downloaded from the Internet or from other graphic applications.
20
al if
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
Loading...