Wiltshire NPC2211 User Manual
Save these instructions for future reference. If you are assembling this unit for
someone else, give this manual to him or her to read and save for future use.
57cm / 22’’ Outdoor
Charcoal BBQ
Model No.
NPC22
11
For Outdoor Use Only!
Made In China
Warning! Be Careful of sharp edges during assembly.
2
Exploded View & Hardware List
17
M8 A3 Wrench L=80mm 1Pc
6 A3 Screwdriver L=152mm 1Pc
M: 1.4X30 65Mn Cotter Pin 2Pcs
L: 6X30 A3 Pin 2Pcs
K: 6 65Mn Large lock washer 5Pcs
J: 5 65Mn Small lock washer 1Pc
I: 6 Heat resistant washer 4Pcs
H: 6 Large washer 8Pcs
G: 6 Small washer 3Pcs
F: M6 Wing Nut 7Pcs
E: M5 Wing Nut 1Pc
D: M8 A3 Hex Nut 2Pcs
C: M6X30 A3
Philips Truss Head Screw 4Pcs
B: M6X10 A3
Philips Truss Head Screw 1Pc
8
6
1
Parts List
4
Exploded View
1. Handle (2)
2. Air vent
3. Lid
4. Warming rack
5. Cooking grid
6. Top hinge-L
7. Top hinge-R
8. Bottom hinge-L
9. Bottom hinge-R
10. Charcoal grid
11. Bottom bowl
12. Leg support cup (4)
13. Ash received
14. Slide
15. Wheel leg (2)
16. Front leg (2)
17. Basket
18. Bottom mesh
19. Wheel (2)
Hardware List
18
12
A: M5X12 A3
Philips Truss Head Screw 1Pc
19
18
16
15
13
14
12
11
10
9
7
5
3
2
1
3
Assembly Instructions
For easiest assembly:
● To avoid losing any small components or hardware, assemble your charcoal BBQ on a hard level surface
that does not have cracks or openings.
● Clear an area large enough to lay out all components and hardware.
● When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and
fully tighten all hardware.
● Follow all steps in order to properly assemble your product.
● The estimated assembly time is: 20-25 minutes.
Step 1
Attach air vent to lid (A Screw 1Pc / J Small Lock washer 1Pc / E Wing nut 1Pc).
Attach handle to lid (I Heat resistant washer 2Pcs / H Large washer 2Pcs / K Large lock washer 2Pcs / F
Wing nut 2Pcs).
Step 2
Attach slide to bottom bowl (B Screw 1Pc / G Small washer 1Pc / K Large lock washer 1Pc / F Wing nut 1Pc).
F
K
H
I
E
J
A
B
K
F
G
Loading...