Wilton 11104, 11105, 11106 User guide

Download

#11128B, Utility Workshop Vise (model 676)

Replacement parts

Spindle and

Handle

Assembly

87005-21 11128S41 11115-15 11104S51 2900690GN 11104S25 2900730GN 11128-1

To order parts or reach our service departm ent, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having t he Model Number and Serial Number of your t ool available when you call will allow us to serve you quic kly and accurately. Some parts are shown for reference only, and may not be available individually.

Serrated Jaw

Inserts

w/Screws B Spindle Nut

Lock Nut and

Bolt Assembly

Outer Ring

w/ Bolt

Spring,

Washer,Clip

Assembly

Swivel Base

Assembly

Thrust Bearing

Washer

Specifications

Stock no. Model no. 676 Jaw width (in.) 6-1/2 Jaw opening (in.) 5-1/2 Throat depth (in.) 3-13/16 Pipe jaw capacity (in.) 1/8–2-1/2 Shipping weight (lb) 43

WILTON

11128B

Note: See reverse side for important safety instructions.

• Ne jamais devisser le mors au-dela de l’ouverture maximum specifiee de

IMPORTANT SAFETY INSTRUCTIONS

• Misuse of vise can cause serious injury to eyes, hands, limbs, etc.

• To ensure safety, vise must be set up and used properly.

• Before setting up and using, read, understand, and follow all instructions

as outlined below.

When setting up vise:

• Use proper size bolts, nuts, lock and flat washers, in all base mounting Holes. Never weld base of vise to any metal object.

• Only hand-tighten swivel base lock down nuts at the sides of the vise.

• Never use a pipe extension to tighten lock nut handles; this can cause

the handles to bend and overstress the lock down bolts.

• Make sure the bench top to which the vise is mounted is properly secured.

When using vise:

• Always use vise of proper size and capacity to hold work object.

• Never use a hammer, pipe extension or cheater bar on spindle handle of

vise.

• Never unscrew moveable jaw beyond the maximum specified opening of the vise.

• Never use vise as a press for assembly or disassembly of objects.

• Always wear eye and face protection when striking vise-held objects or

when using power tools with a vise.

• NOTE: The spindle handle (“tom my bar”) has been engineered to bend if excessive clamping pressure is applied, to prevent potential damage to vise.

WARNING: This product can e xpose you to chemicals including lead which is kn o wn to the S ta te of California to caus e cancer and birth defects or other reproductive harm . For more inform ation go to http:// www.p65warnings.ca.gov.

CONSIGNES DE SECURITE IMPORTANTES

• Une utilisation incorrecte, de l’etau peut entrainer des blessures graves aux yeux aux mains et a d’autres parties du corps.

• Pour guarantir la securite, lÉtau’doit installe et utilise corrÉctement.

• Avant installation et utilisation-lire, veiller a bien comprendre et suivre

toutes les instructions telles qu’elles sont donnees de chaque cote de cette etiquette.

Installation de l’etau:

• Pour bloquer la base de l’etau, Útiliser des ecrous, boulons et rondelles de la bonne taille dans tous les trous de fixation. ne jamais souder la base de l’etau a Ún objet metallique quelconque.

• Pour un etau a base tournante, ne serrer qu’avec les doigts les poignees des contre-ecrous sur les cotes de l’etau.

• Ne jamais utiliser une rallonge pour serrer les poignees des contreecrous-cela pourrait tordre les poignees.

• Assurez-vous que l'établi sur lequel est monté l'étau est correctement

fixé.

Utilisation de l'étau:

• Toujours utiliser un étau de taille et de capacité appropriées pour tenir

l’objet de travail.

• Ne jamais utiliser un marteau, une rallonge ni tout autre outil permettant de faire levier sur la poingee de l’etau.

l’etau.

• Le jamais utiliser l’etau pour enfoncer un objet dans un autre ou l’en faire sortir.

• Toujours porter des lunettes et un masque de protection pour frapper sur un object ou utiliser un outillage electrÍque avec un etau.

• REMARQUE: La poignée de la bro ch e («b ar re de ser ra ge ») a été

conçue pour se plier si une pression de serrage excessive est appliquée, afin d'éviter tout dommage potentiel à l'étau.

AVERTISSEMENT: Ce produit peut vous e xposer à des produits chimiques, y compris le pl omb qui est connu par l'État de Californie pour causer le ca ncer et des malformations co ngénitales ou d'autres problèmes de reproduction. Pour plus d'informations, visitez http://www.p65warnin

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

• El uso indebido del tornillo de banco puede causar lesiones graves en los ojos, en las manos y en otras partes del cuerpo.

• Para asegurar la seguridad, el tornillo de banco debe configurarse y utilizarse de forma debida.

• Antes de configurar y usar-lea, entie nd a y siga todas las instr uccio nes indicadas en ambos lados de la etiqueta.

Al configurar el tornillo de banco:

• Para sujetar la base del tornillo de banco, use tuercas, pernos y arandelas de presion del tamano adecuado en todos los agujeros de montaje. No suelde nunca la base del tornillo de banco a ningun objeto de metal.

• Para el tornillo de banco de base giratoria, apriete solamente a mano las palancas de las contratuercas en los lados del tornillo de banco.

• No use nunca un tubo de extension para apretar las pal anc as en l as contratuercas esto puede hacier que doblen las palancas.

• Asegúrese de que la parte superi or del ban co don de está mo nta do el

tornillo de banco esté bien asegurada.

Al usar el tornillo de banco:

• Use siempre un tornillo de banco del tamano y de la capacidad adecuados para sujetar el objeto de trabajo.

• No use nunca un martillo, un tubo de extension o un Álargador en la palanca del uso del tornillo de banco.

• No desatornille nunca la mordaza movil mas alla de la’abertura especificada maxima del tornillo de banco.

• No use nunca el tornillo de banco para encajar un objeto en otro objeto o desprenderlo de otro objeto.

• Lleve siempre protectores de los ojos y la cara al golpear o usar herramientas as con un tornillo de banco.

• NOTA: El mango husillo (“bar Tommy”) ha sido diseñado para doblarse si se aplica una presión de apriete excesivo, para evitar el daño potencial a tornillo de banco.

ADVERTENCIA: Este producto puede exponerlo a productos químicos, incluido de pl omo, que en el estad o de California se co noce como causantes de cáncer y defectos de nacimiento u otros daños reproductivos. Para obtener más información, vaya a http://www. p65warnings.ca.gov.

s.ca.gov.

The Wilton® lifetime warrant y is for th e produ ct’s lifeti me with no end date. Th is warra nty covers m anufact urer’s defect o nly and do es not cover failures due directl y or indirectly to misuse, ab use, negligence or acciden ts, normal wear-and-tea r, improper repair, alt erations or lack of maintenance. For more information, please visit wiltontools.com.

when calling. If a product requires fur ther inspection, the Technical Service representative will explain and assist with an y additional action needed. W ilton has

Please contact Technic al Service by calling 1-800-274-68 46. Please no te that you will be asked to provide proo f of initial purchase

Authorized Service C enters located throughout t he United States. For the nam e of an Authorized Service Cent er in your area call 1-800-27 4-6846 or use the Service Center Locator on the Wilton website.

Wilton sells throu gh distributors only. The sp ecifications list ed in Wilt on printed materi als and on offici al Wilton bra nded website a re given as gen eral informati on and are not binding. W ilton reserve s the ri ght to effe ct at an y time, witho ut prior noti ce, th ose alte rati ons to part s, fittings, a nd acc essor y equipm ent whic h the y may deem necessary for any reason whatsoever.

NOTE: Wilton is a division of JPW Industries, Inc. References i n this docum ent to Wi lton also appl y to JPW Industries, Inc., or any of its successors in int erest to the Wilton brand.

How to Get Technical S u pp or t

Stock No. Model Base Part No.

Dimension A

(in)

Dimension B

(in)

Dimension C

(in)

Dimension D

(in)

Bolt Circle

Diameter (in)

Bolt Hole

Diameter (in)

Mounting Bolt Diameter (in)

28810

845M 744M-06

2 7/16” 2 14/16” 2 14/16” 2 7/16” 7 8/16” 1/2" 7/16"

28811 855M

745M-06

2 13/16” 3 6/16” 3 6/16” 2 13/16” 8 12/16” 1/2" 7/16"

28812 865M

745M-06

2 13/16” 3 6/16” 3 6/16” 2 13/16” 8 12/16” 1/2" 7/16"

28813 880M

748M-06

3 5/16” 3 15/16” 3 15/16” 3 5/16” 10 5/16” 11/16" 5/8"

28814 8100M

748M-06

3 5/16” 3 15/16” 3 15/16” 3 5/16” 10 5/16” 11/16" 5/8"

21300 744 21300-09

2 3/16” 2 14/16” 3 1/16” 2 7/16” 7 8/16” 9/16" 1/2"

21400 745 1011980

2 9/16” 3 5/16” 3 9/16” 2 13/16” 8 12/16” 11/16" 5/8"

21500 746 21500-09

2 13/16” 3 12/16” 4 ” 3 2/16” 9 12/16” 11/16" 5/8"

21800 748 1010840

2 13/16” 3 12/16” 4 ” 3 2/16” 9 12/16” 11/16" 5/8"

63187 1550/745 YEL. 1012060

2 9/16” 3 5/16” 3 9/16” 2 13/16” 8 12/16” 11/16" 5/8"

63188 1560/746 YEL. 1013060

2 13/16” 3 12/16” 4 ” 3 2/16” 9 12/16” 11/16" 5/8"

63300 WS4 310046WA

2 4/16” 2 4/16” 2 4/16” 2 4/16” 6 5/16” 9/16" 1/2"

63301 WS5 310056WA

2 8/16” 2 8/16” 2 8/16” 2 8/16” 7 ” 9/16" 1/2"

63302 WS6 310066WA

2 11/16” 2 11/16” 2 11/16” 2 11/16” 7 9/16” 9/16" 1/2"

63304 WS8 310086WA

3 2/16” 3 2/16” 3 2/16” 3 2/16” 8 13/16” 9/16" 1/2"

28818

674U 674U-05

1 14/16” 2 4/16” 2 4/16” 1 14/16” 5 14/16” 7/16" 3/8"

28819

675U 675U-05

2 1/16” 2 8/16” 2 8/16” 2 1/16” 6 7/16” 1/2" 7/16"

28820

676U 744M-06

2 7/16” 2 14/16” 2 14/16” 2 7/16” 7 8/16” 1/2" 7/16"

28815 656UHD

656W-05

3 2/16” 3 11/16” 3 11/16” 3 2/16” 9 11/16” 1/2" 7/16"

28816 648UHD

648W-05

3 2/16” 3 12/16” 3 12/16” 3 2/16” 9 12/16” 11/16" 5/8"

11126 D4/674 2900710

2 ” 2 ” 2 3/16” 1 13/16” NA 7/16" 3/8"

11127 D5/675 2900720

2 1/16” 2 1/16” 2 8/16” 2 ” NA 7/16" 3/8"

11128 D6/676 2900730

2 7/16” 2 7/16” 2 14/16” 2 5/16” NA 7/16" 3/8"

191 656

2656002

3 8/16” 3 8/16” 3 8/16” 3 8/16” 10 ” 5/8" 1/2"

11800 648 2648004

3 7/16” 3 7/16” 3 7/16” 3 7/16” 9 12/16” 11/16" 5/8"

28821 4550R

4500R-04

2 13/16” 3 6/16” 3 6/16” 2 13/16” 8 12/16” 1/2" 7/16"

28822 4650R

4600R-03

2 13/16” 3 6/16” 3 6/16” 2 13/16” 8 12/16” 1/2" 7/16"

28823 4800R

4800R-04

3 ” 3 9/16” 3 9/16” 3 ” 9 4/16” 9/16" 1/2"

14500 4500 11206S03

3 2/16” 3 2/16” 3 2/16” 3 2/16” 8 14/16” 9/16" 1/2"

14600

4600

11206S03

3 2/16” 3 2/16” 3 2/16” 3 2/16” 8 14/16” 9/16" 1/2"

14800

4800

14800S07

3 2/16” 3 2/16” 3 2/16” 3 2/16” 8 13/16” 9/16" 1/2"

28824 550P

550P-07

2 2/16” 2 9/16” 2 9/16” 2 2/16” 6 11/16” 1/2" 7/16"

69999 Multi-Purpose 5 n/a

2 7/16” 2 7/16” 2 7/16” 2 7/16” 6 14/16” 1/2" 7/16"

11104

89100 NA 2 9/16” 2 9/16” 2 9/16” 2 9/16” 5 2/16” 3/8" 5/16"

11105

89125 NA 3 5/16” 3 5/16” 3 5/16” 3 5/16” 6 10/16” 7/16" 3/8"

11106

89150

NA 3 14/16” 3 14/16” 3 14/16” 3 14/16” 7 12/16” 1/2" 7/16"

Multi-

Purpose

General

Purpose

Bench Vise Mounting Dimensions

Mechanics

Pro

Mechanics

Shop

Utility / Utility HD Reversible

Wilton 11104, 11105, 11106 User guide

Specifications and Main Features

Frequently Asked Questions

User Manual