WILSON PRO 1100 Installation Manual
PRO 1100
A Wilson Electronics Brand
wilsonpro.com 866.294.1660
Installation Guide
In-Building Cell Signal Amplifi er
Package Contents
1
About The Pro 1100
2
Key Features
4
Post Install Setup
5
Menu System
7
Safety Guidelines
12
Warranty
17
Index
PRO 1100 IN-BUILDING CELL SIGNAL AMPLIFIER
1
Pro 1100
Pro 1100
2’ Wilson
400
2’ Wilson
RG11
Lightning Surge
Protector
Lightning Surge
Protector
Wide Band Directional
Antenna + 75’
Wilson 400 Cable
Wide Band Directional
Antenna + 75’
RG11 Cable
Dome Antenna +
60’ Wilson 400 Cable
Dome Antenna +
50’ RG11 Cable
Kit 460147 50Ω
Kit 461147 75Ω
Package Contents
IN-BUILDING CELL SIGNAL AMPLIFIER PRO 1100
2
Up to +25 dBm uplink power for
maintaining connections with
far-away cell towers
Up to +15 dBm downlink
power for improved indoor cell
coverage area
Color touch screen, for easy
installation and displaying detailed
amplifi er status
eXtended Dynamic Range (XDR)
for Continuous Connectivity
In-Building Cell Signal Amplifi er
Pro 1100
PRO 1100 IN-BUILDING CELL SIGNAL AMPLIFIER
3
The Pro 1100 cell signal amplifi er system
provides signifi cantly enhanced 4G LTE and 3G
voice and data coverage inside large homes
and commercial buildings where cell signals
may not otherwise penetrate. Installation of a
Pro 1100 cell signal amplifi er system results in
fewer dropped calls, improved voice quality,
uninterrupted texts, and faster data speeds—
along with better audio and video streaming.
The Pro 1100 has been approved for use by the
FCC (U.S), ISED (Canada), and is carrier-accepted by all major mobile
networks and providers in North America. No additional approvals or permissions
are required.
The Pro 1100 also incorporates Wilson Electronics’ state-of-the-art XDR (eXtended
Dynamic Range) technology that prevents signal overload conditions which can, in
accordance with regulations, force the amplifi er to shut down. When the Pro 1100
senses that any incoming cell signal is too strong and threatens to overload the
system, XDR automatically reduces amplifi er gain to compensate while maintaining
signal coverage throughout the building. The Pro 1100 incorporates an easy-to-use
color LCD touch screen, and both antenna ports are located on the top of the unit
for simple installation. Like all WilsonPro cell signal boosters, the Pro 1100 amplifi er
system is universal: it works for all cellular devices, all services and all U.S. and
Canada cell phone carriers.
IN-BUILDING CELL SIGNAL AMPLIFIER PRO 1100
4
Extended Dynamic Range (XDR) for continuous connectivity:
XDR lets the Pro 1100 system work with an incoming signal and
never shuts down due to a strong outside signal.
Simple Wall-Mount Installation: An indoor and outdoor port are
located on top of the amplifi er for easy antenna connections,
while an exposed mounting fl ange at each corner of the amplifi er
provides for simple and clean wall-mount installation.
Onboard Software for Better Control: The amplifi er is
automatically controlled with automatic onboard software,
ensuring great connectivity throughout large spaces and multistory buildings. The amplifi er will adjust its gain level up or down
as required by the conditions of the immediate signal environment.
Color LCD Touch Screen: The Pro 1100 utilizes a color LCD
touch screen, for assessing amplifi er performance, making
adjustments to the outside antenna, and turning bands on and o .
IN-BUILDING CELL SIGNAL AMPLIFIER PRO 1100
4
Key
Features
Loading...