Wilson Electronics 801201-A Installation Manual

Installation Guide

Cellular & PCS
Analog & Digital - CDMA, GPRS, GSM, TDMA, 1x, HSDPA

Wireless

Smart TechnologyTM Amplifi er

Mobile Wireless

Dual Band

Cellular/PCS

PART# 801201-A

FCC ID: PWO8012ASM

IC: 4726A-8012ASM

MOBILE

Wilson Electronics, Inc.

3301 E. Deseret Drive, St. George, Utah 84790

For additional technical support go to

www.wilsonelectronics.com

Phone: [phone] Fax: [phone]

The term “IC:” before the radio certification number signifies

that Industry of Canada technical specifications were met.

1. PURPOSE OF THE AMPLIFIER

This Wilson Smart Technology™ Amplifi er greatly improves signal strength
inside a vehicle without a physical connection to the phone or cellular data card.
It also allows multiple devices to be used simultaneously.

2. PACKAGE CONTENTS

PACKAGE CONTENTS

• Bi-Directional Amplifi er

• DC plug-in power supply

• Low Profi le Antenna
(Coax Included)

• 6’ Extension Cable

Bi-Directional

Amplifier

DC Power

Supply

6' Extension

Cable

• Small Antenna

OPTION A

Low Profile

Antenna

(Coax Included)

3. HOW THE AMPLIFIER FUNCTIONS

The signal is received by the outside antenna from the cell site. It is then AMPLIFIED
and transmitted to your phone through the inside antenna. When the phone transmits,
the signal is received by the inside antenna. It is then AMPLIFIED and transmitted to
the cell site through the outside antenna (not included).

4. AMPLIFIER SYSTEM INSTALLATION (See Illustration on pg. 5)

OPTION B

Small

Antenna

4.1 Mounting the Amplifi er

4.1.1 Select a suitable location to mount the AMPLIFIER. The amplifi er
can be mounted to the selected location using screws. (Screws not
included.) Mount the AMPLIFIER away from direct sunlight,
excessive heat and/or moisture. The amplifier needs proper ventilation.

2

4.2 Installing the

4.2.1A (option A) - The inside antenna should be mounted approximately 1 foot or less
from where the phone is used. The best place to mount the inside antenna is shoulder
height on the side of the drivers seat. The closer the inside antenna is placed to the
phone, the better the performance. See option A.

Do not mount on a surface near metal.

Amplifi er

4.2.1B (option B) - For convenience, the Small
Antenna directly attached to the phone will
perform as well as a Direct Connection Amplifi er
or similar to the Low Profi le antenna attached
directly to the phone. The Small Antenna must be
directly connected to the back of the phone using
Velcro (included). The Small Antenna will not
work away from the phone like the Low Profi le
antenna. Connect the 6’ extension cable to the Small
Antenna (included). Attach Small Antenna to the
back of the phone. See option B.

Wilson Cellular

Inside Antenna (2 options included)

Low Profi le

Antenna

Small Antenna placement is depen­dant upon the location of the phones
antenna. Place the Small Antenna
as close as possible to the phones
antenna.

Amplifi er 6’ Extension

Cable

Small

Antenna

WARNING: Do not plug the amplifier directly into the phone using a phone specific adapter.

4.2.2 Connect the Inside Antenna (A) or 6’ Extension Cable (B) to the side labeled
“INSIDE ANTENNA” on the AMPLIFIER.

3