Wilson Electronics 801110 Installation Manual
Amplifier
Installation
u
ide
In-Building
Wireless
Amplifi er
Contents:
Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · 1
Antenna Options and Accessories · · · · · · · · · · · · · · · 2
Before Getting Started / How It Works · · · · · · · · · · · · 3
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · 4
Installing a Wilson Outside Antenna · · · · · · · · · · · · · · 5
Installing a Wilson Inside Antenna · · · · · · · · · · · · · · · 6
Installing a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · · 7
Powering Up a Wilson Amplifi er · · · · · · · · · · · · · · · · · 8
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · 9
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · 10
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · 11
Warnings and Recommendations · · · · · · · · · · · · · · · 12
Factor Conversions · · · · · · · · · · · · · · · · · · · · · · · · · · 13
Distance Coverage Chart · · · · · · · · · · · · · · · · · · · · · 14
Amplifi er Specifi cations · · · · · · · · · · · · · · · · Back Cover
Wilson
®
Electronics, Inc.
Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifi er.
!
1
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson’s 30-day money-back
guarantee. If for any reason the performance of any product is not acceptable,
simply return the product directly to the reseller with a dated proof of purchase.
1-Year Warranty
Wilson Electronics amplifi ers are warranted for one (1) year against defects in
workmanship and / or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.
Amplifi ers may also be returned directly to the manufacturer at the consumer’s
expense, with a dated proof of purchase and a Returned Material Authorization
(RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either
repair or replace the product. Wilson Electronics will pay for delivery of the repaired
or replaced product back to the original consumer.
This warranty does not apply to any amplifi ers determined by Wilson Electronics
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.
The Manufacturer’s rated output power of this equipment is for single carrier operation.
For situations when multiple carrier signals are present, the rating would have to be
reduced by 3.5 dB, especially where the output signal is re-radiated and can cause
interference to adjacent band users. This power reduction is to be by means of input power
or gain reduction and not by an attenuator at the output of the device.
Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) this device must accept any interference, including interference that
may cause undesired operation of this device.
Disclaimer: The information provided by Wilson Electronics, Inc. is believed to
be complete and accurate. However, no responsibility is assumed by Wilson
Electronics, Inc. for any business or personal losses arising from its use, or for
any infringements of patents or other rights of third parties that may result from
its use.
Copyright © 2009 Wilson Electronics, Inc. All rights reserved.
3301 East Deseret Drive, St. George UT 84790
For additional Technical Support visit
www.wilsonelectronics.com
Phone: 866-294-1660 Fax: 435-656-2432
Wilson
®
Electronics, Inc.
2
Installation Instructions for the Following Wilson Amplifi ers:
In-Building Wireless Cellular Smart Technology™ 50 dB Amplifi er
Model # 801105
FCC ID: PWO8011SB IC: 4726A-8011SB
In-Building Wireless Cellular Smart Technology™ 60 dB Amplifi er
Model # 801106, Part # 801108, Part # 801110
FCC ID: PWO8011SB IC: 4726A-8011SB
In-Building Wireless PCS Smart Technology™ 60 dB Amplifi er
Model # 801306
FCC ID: PWO8013SB IC: 4726A-8013SB
In-Building Wireless iDEN Smart Technology™ 50 dB Amplifi er
Model # 804005
FCC ID: PWO8040SB IC: 4726A-8040SB
In-Building Wireless iDEN Smart Technology™ 60 dB Amplifi er
Model # 804006
FCC ID: PWO8040SB IC: 4726A-8040SB
In-Building Wireless 900 MHz Smart Technology™ 60 dB Amplifi er
Model # 801506, Model # 801606, Model # 801170, Model # 801370
Not for sale in the U.S. and Canada.
The term “IC” before the radio certifi cation number only signifi es that Industry
Canada technical specifi cations were met.
A 13 dB 800 MHz Yagi Cellular Antenna (301111)
B 1900 MHz Yagi PCS Antenna (301124)
C 800 MHz Yagi Cellular Antenna (301129)
D Dual-Band Panel Antenna (301135)
E Dual-Polarity Dome Antenna (301123)
F Dual-Band Dome Antenna (301121)
G Splitters (Multiple splitters available)
H Amplifi er Soft Cases
I Omni-Directional Antenna (301201)
J Marine Antenna (301130)
Antenna Options & Accessories
A
B
C
DE
F
H
I
J
G
3
Before Getting Started
This guide will help you properly install Wilson’s In-Building Wireless Smart
Technology™ Amplifi ers. It is important to read through all of the installation
steps for your particular application prior to installing any equipment. Read
through the instructions, visualize where all the equipment will need to be installed
and do a soft installation before mounting any equipment. If you do not understand
the instructions in full, seek professional help, or contact Wilson Technical Support at
866-294-1660.
Inside this Package
• In-building wireless amplifi er
• AC/DC 110 volt power supply
Additional Required Equipment (sold separately)
• Outside antenna (Yagi recommended)
• Inside dome, panel or low-profi le antenna
• Antenna coax cable
How it Works
Wilson amplifi ers are small, portable, bi-directional devices that deliver service levels
consistent with what would be expected in areas of high cell network coverage. They
amplify a weak or shadowed signal in mobile, marine and in-building applications.
When using a Wilson amplifi er in conjunction with Wilson antennas, the outside
antenna will collect the cell tower signal and send it through the cable to the
amplifi er. The signal is then amplifi ed and broadcast from the inside antenna
to the surrounding area. Cell phones and cellular data cards in that area then
communicate with the improved signal. When a cell phone or cellular device
transmits, the signal is received by the inside antenna, amplifi ed by the amplifi er
and broadcast back to the cell tower through the outside antenna.
In-building wireless
amplifi er
AC/DC plug-in power
supply
4
Installation Overview
The following steps provide a summary of the amplifi er/antenna installation
process. However, they are not a substitute for the complete installation
instructions on the following pages, which you should read thoroughly. Contact
Wilson’s Technical Support Department with any questions at 866-294-1660.
STEP 1 Install the Outside Antenna
Mount the Yagi antenna so that it points toward the cell site and away from where
the inside antenna will be located. Depending on your amplifi er model, the two
antennas will need 50-75 feet of separation. (See illustrations on pages 5 and 7.)
STEP 2 Install the Inside Antenna
Select a location in the center of where the signal needs to be amplifi ed. Refer
to the instructions included with the inside antenna. (See illustration on page 6 to
determine the inside antenna model that best meets your specifi c needs.)
STEP 3 Install the Amplifi er
Position the amplifi er in a well-ventilated location near a power outlet. Attach
the outside and inside antennas to the amplifi er using Wilson 400 low loss coax
cable (available from Wilson Electronics).
STEP 4 Power up the Amplifi er
IMPORTANT! Before connecting the power supply, ensure
that both the inside and outside antenna cables are
connected. Also ensure that all cell phones and cellular data
cards within 50 feet of the inside antenna are turned off. Plug
in the supplied 6-volt power supply into the amplifi er and
then into a wall outlet.
STEP 5 Check the Amplifi er Lights
The PWR light should be green, indicating that the amplifi er
has power. If all other lights are also green, the amplifi er is
operating properly; however, if you do not have the desired
signal coverage area, refer to pages 5, 6, 9 and 10.
Note: if you are using an outdoor Yagi antenna, it must be
adjusted for maximum signal.
Loading...