Contents:
Package Contents ...............................................1
Antenna Kit Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation Diagram ..............................................3
Before Getting Started ............................................4
Quick Install Overview ............................................5
Installing the Outside Antenna ......................................6
Finding the Strongest Signal .......................................7
Installing the Inside Antenna .......................................9
Installing a Wilson Electronics Signal Booster. . . . . . . . . . . . . . . . . . . . . . . . . .9
Powering up a Wilson Electronics Signal Booster ......................10
Troubleshooting & Understanding the Lights .........................11
Warnings and Recommendations ..................................13
Guarantee & Warranty ...........................................14
Specifications ......................................... Back Cover
Note: This manual contains important safety and operating information. Please read and follow the instructions
in this manual. Failure to do so could be hazardous and result in damage to your Signal Booster.
AG Pro Quint
Appearance of device and accessories may vary.
700 / 800 / AWS (1700 / 2100) / 1900 MHz
In-Building Wireless
SmarTech ™
Signal Booster
TM
Kit #461104
1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
Installation Instructions for the Following
Wilson Electronics Signal Boosters:
How it Works
Designed to provide signal coverage in buildings up to 80,000 square feet, the Wilson AG Pro
Quint boosts signals on 800 MHz, 1900MHz, AWS and both AT&T and Verizon 700 MHz 4G
networks as well as Sprint 4G on the G-Block of 1900 MHz. The AG Pro Quint is the most
affordable five-band Signal Booster available. Wilson’s compact, integrated design is about the
size of a textbook and weighs less than 3 pounds. The AG Pro Quint’s control knobs allow the
installer to optimize the gain on each of the frequency bands.
The AG Pro Quint delivers up to 69.9 dB of gain and supports CDMA, GSM, EVDO, LTE,
HSPA+ and WCDMA technologies. Like all Wilson Signal Boosters this unit features cell tower
protection technologies refined over more than a decade of research and development.
Package Contents
12V / 3A, AC/DC
Power Supply
(859900)
Panel Antenna
(311135-40060)
Wide Band
Directional Antenna
(314411-40075)
60’ LMR Cable
(952360)
75’ LMR Cable
(952375)
AG Pro Quint
700 / 800 / AWS (1700 / 2100) / 1900 MHz
In-Building Wireless SmarTech ™ Signal Booster
Model # 460004 FCC ID: PWO460004
Inside Antenna Options
Kit 309900-50N
• 2- Wall Panel antennas
• 1- 50 ohm 3-Way Splitter
Kit 309905-50N
• 3 - Wall Panel Antennas
• 3 - 2-Way 50 Ohm Splitters
Kit 309902-75F
• 2 - Wall Panel Antennas
• 1 - 3-Way 75 Ohm Splitter
Kit 309903-75F
• 3 - Wall Panel Antennas
• 3 - 2-Way 75Ohm Splitters
Kit 309904-75F
• 1 – Wall Panel Antenna
• 1- 2-Way 75 Ohm Splitter
Kit 301121-40010
• 50 Ohm Dome Antenna
• 10’ LMR400
Kit 301151-0610
• 75 Ohm Dome Antenna
• 10’ RG6 Cable
311155-0630
• 75 Ohm Wall mount Panel Antenna
• 30’ RG6 Cable
311135-5820
• 50 Ohm Wall mount Panel Antenna
• 20’ RG58 Cable
311135-40060
• 50 Ohm Wall mount Panel Antenna
• 60’ LMR400 Cable
311155-40060
• 75 Ohm Wall mount Panel Antenna
• 60’ LMR400 Cable
AG Pro Quint
TM
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
To purchase, contact Wilson Electronics Sales Department at: 800-204-4104
Outside Antenna Options
Kit 301111-0675
• Yagi Directional Antenna
• 75’ RG6 Cable
• N-Male to F-Female adapter
Kit 311201-0620
• Omni Directional w/ F-Female
• 20’ RG6 Cable
Kit 311124-0660
• 1900 MHz Yagi Directional
• 60’ RG6 Cable
• N-Male to F-Female adapter
Kit 311129-0650
• 800 MHz Yagi Directional
• 50’ RG6 Cable
• N-Male to F-Female adapter
Kit 314473 -0640
• 75 Ohm Pole Mount Panel Antenna
• 40’ RG6 Cable
Kit 314475 – 0630
• 75 Ohm Wide Band Directional
• 30’ RG6 Cable
Kit 311141 - 0620
• 75 Ohm Grey Brick Antenna
• 20’ RG6 Cable
Kit 314411-40075
• 50 Ohm Wide Band Directional
• 75’ LMR400 Cable
Kit 311203-40020
• Omni-Directional Antenna
• 20’ LMR400 Cable
Kit 301111-400170
• Yagi Directional w/ N-Female
• 170’ LMR400
Kit 311129-400100
• 800 MHz Yagi Antenna
• 100’ LMR400 Cable
Kit 314453-40075
• 50 Ohm Pole Mount Panel Antenna
• 75’ LMR400 Cable
Kit 314453-5825
• 50 Ohm Pole Mount Panel Antenna
• 25’ RG58 Cable
Kit 314411-5825
• 50 Ohm Wide Band Directional
• 25’ RG58 Cable
Kit 301111-5850
• Yagi Directional Antenna
• 50’ RG58 Cable
Kit 311124 – 5840
• 1900 MHz Yagi Directional
• 40’ RG58 Cable
Kit 311203-5820
• Omni-Directional Antenna
• 20’ RG58 Cable
Kit 311129-5830
• 800 MHz Yagi Antenna
• 30’ RG58 Cable
Mini-Mag - 301126
• 12.5 RG174 Cable
3
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
Installation Diagram
Inside Antenna
Preferred Method: Place the Inside
Antenna in the ceiling facing down for
the best coverage.
Null Zone: The area under the
Outside Antenna, where the
Outside Antenna radiates the
least.
Outside Antenna
(Wide Band Directional
Antenna shown)
Surge Protector
Power Strip
Note: A Lightning Surge Protector is
recommended for all building installations
(sold separately). Make sure the protector
is installed in line between the Outside
Antenna and the Signal Booster (see page 7
for more details).
Note: The Inside Antenna may be
mounted on the wall directly under the
Outside Antenna, in the null zone, if
20 feet of vertical separation can be
maintained.
Power
Supply
4
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.
Before Getting Started
This guide will help you properly install your Wilson Electronics Signal Booster.
It is important to read through all of the installation steps for your
particular application prior to installing any equipment. Read through the
instructions, visualize where all the equipment will need to be installed and do
a soft installation before mounting any equipment.
Contact Wilson Electronics
Technical Support with any questions at: 866-294-1660.
Signal
Booster
Lightning
Surge Protector
(recommended)
Inside Antenna