Amplifier
Installation
In-Building
Dual Band
Wireless
Cellular
Amplifi er
Contents:
Before Getting Started / How It Works · · · · · · · · · · · · · 1
Antenna Options and Accessories · · · · · · · · · · · · · · · · 1
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Installation Diagram · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Installing a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · · 3
Powering Up a Wilson Amplifi er · · · · · · · · · · · · · · · · · · 4
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · · 4
Warnings and Recommendations · · · · · · · · · · · · · · · · 5
Finding Signal Strength and Coverage Distance · · · · · · 5
Amplifi er Specifi cations · · · · · · · · · · · · · · · · · · · · · · · 6
Guarantee and warranty · · · · · · · · · · · · · · · · Back Cover
Wilson
®
Electronics, Inc.
Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifi er.
!
1
Installation Instructions for the Following Wilson Amplifi ers:
DB In-Building Wireless Cellular Smart Technology™ Amplifi er
Model # 271247-75
FCC ID: PWO271247ASB IC: 4726A-271247ASB
The term “IC” before the radio certifi cation number only signifi es that Industry
Canada technical specifi cations were met.
A 800/1900 MHz Omni-Directional Antenna (301201/301202)
B 1900 MHz Yagi PCS Antenna (301124)
C 800 MHz Yagi Cellular Antenna (301129)
D Dual-Band Panel Antenna (301155)
E Dual-Band Dome Antenna (301151)
Inside this Package
DB Wireless
Amplifi er
AC/DC Plug-in
Power Supply
Antenna Options & Accessories
B
C
D
E
A
Before Getting Started
This guide will help you properly install Wilson’s In-Building Wireless Smart
Technology™ Amplifi ers. It is important to read through all of the installation
steps for your particular application prior to installing any equipment.
Read through the instructions, visualize where all the equipment will need to be
installed and do a soft installation before mounting any equipment. If you do
not understand the instructions in full, seek professional help, or contact Wilson
Technical Support at 866-294-1660.
800/1900 Omni
Directional Antenna
2
1 Select a location to install the amplifi er that is away from excessive heat, direct
sunlight and moisture.
2 Select a location on the roof of the building to install the outside antenna. Use
a cell phone in test mode to fi nd the strongest signal from the cell tower. Visit
wilsonelectronics.com to fi nd test mode function for your particular cell phone.
3 Select a location for the inside antenna, preferably in the center of where the
signal needs to be amplifi ed.
4 Verify that both the outside antenna and the inside antenna are connected
before powering up the amplifi er.
Lightning protection is recommended for all in-building installations.
5 Separation distance between inside and outside antennas should be between
50 to 60 feet.
Typical Installation
EASY TO INSTALL
Wilson Electronics designs and manufactures a full range of wireless
amplifi ers for in-building applications.
The following steps provide a summary of the amplifi er/antenna installation
process. However, they are not a substitute for the complete installation
instructions on the following pages, which you should read thoroughly. Contact
Wilson’s Technical Support Department with any questions at 866-294-1660.
Power
Supply
Amplifer
Inside Antenna
1
3
Warning: See RF safety
warning on page 6.
Inside Antenna
Mounting Bracket
2
Loading...