Wilson Electronics 271247-50 Installation Manual

Amplifier

Installation

u

ide

In-Building
Wireless
Amplifi er

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1
Antenna Options and Accessories · · · · · · · · · · · · · · · · · 2
Before Getting Started / How It Works · · · · · · · · · · · · · · 2
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installation Diagram · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installing a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · · · · 4
Powering Up a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · 5
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · · · 5
Warnings and Recommendations · · · · · · · · · · · · · · · · · 6
Finding Signal Strength and Coverage Distance · · · · · · · 6
Amplifi er Specifi cations · · · · · · · · · · · · · · · · · · Back Cover

Wilson

®

Electronics, Inc.

Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifi er.

!

1

30-Day Money-Back Guarantee

All Wilson Electronics products are protected by Wilson’s 30-day money-back
guarantee. If for any reason the performance of any product is not acceptable,
simply return the product directly to the reseller with a dated proof of purchase.

1-Year Warranty

Wilson Electronics amplifi ers are warranted for one (1) year against defects in
workmanship and / or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.

Amplifi ers may also be returned directly to the manufacturer at the consumer ’s
expense, with a dated proof of purchase and a Returned Material Authorization
(RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either
repair or replace the product. Wilson Electronics will pay for delivery of the repaired
or replaced product back to the original consumer.

This warranty does not apply to any amplifi ers determined by Wilson Electronics
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.

RMA numbers may be obtained by phoning Technical Support at 866-294-1660.

The Manufacturer’s rated output power of this equipment is for single carrier operation.
For situations when multiple carrier signals are present, the rating would have to be
reduced by 3.5 dB, especially where the output signal is re-radiated and can cause
interference to adjacent band users. This power reduction is to be by means of input power
or gain reduction and not by an attenuator at the output of the device.

Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) this device must accept any interference, including interference that
may cause undesired operation of this device.

Disclaimer: The information provided by Wilson Electronics, Inc. is believed to
be complete and accurate. However, no responsibility is assumed by Wilson
Electronics, Inc. for any business or personal losses arising from its use, or for
any infringements of patents or other rights of third parties that may result from
its use.

Copyright © 2007 Wilson Electronics, Inc. All rights reserved.

3301 East Deseret Drive, St. George UT 84790

For additional Technical Support visit

www.wilsonelectronics.com

Phone: [phone] Fax: [phone]

Wilson

®

Electronics, Inc.

2

Installation Instructions for the Following Wilson Amplifi ers:

DT In-Building Wireless Cellular Smart Technology™ Amplifi er

Model # 271247-50 (50 ohm) 271247-75 (75 ohm)
FCC ID: PWO271247ASB IC: 4726A-271247ASB

The term “IC” before the radio certifi cation number only signifi es that Industry
Canada technical specifi cations were met.

A 13 dB 800 MHz Yagi Cellular Antenna (301111)
B 1900 MHz Yagi PCS Antenna (301124)
C 800 MHz Yagi Cellular Antenna (301129)
D 800/1900 MHz Omni-Directional Antenna (301201/301202)
E Dual-Band Panel Antenna (301135)
F Dual-Polarity Dome Antenna (301123)
G Dual-Band Dome Antenna (301121)

Inside this Package

DT Wireless

Amplifi er

AC/DC Plug-in
Power Supply

Antenna Options & Accessories

A

B

C

EF

G

D

Before Getting Started

This guide will help you properly install Wilson’s In-Building Wireless Smart
Technology™ Amplifi ers. It is important to read through all of the installation
steps for your particular application prior to installing any equipment.
Read through the instructions, visualize where all the equipment will need to be
installed and do a soft installation before mounting any equipment. If you do
not understand the instructions in full, seek professional help, or contact Wilson
Technical Support at 866-294-1660.