Wilson Benesch The Circle Owners manual

Set-up Instructions

The Circle Turntable &
Act 0.5 Tonearm

Please visit

WWW.Wilson-Benesch.com

For electronic registration of your guarantee.

Circle Hardware Pack

Comprising: 1 x Circle Drive Belt
1 x 1.5mm Allen Wrench
1 x 2.0mm Allen Wrench

Tonearm Hardware Pack

Comprising: 1 x Counter-Balance Unit
1 x Anti-Skate Weight
1 x 1.3mm Allen Wrench
1 x 2.0mm Allen Wrench
2 x M3 Cartridge Washers
2 x M3 Cartridge Screws

Step 1

Place the lower plinth in the desired location.
This must be a perfectly horizontal surface which
is free from vibration. Ideally this would be a
pre-levelled audio table specifically designed
for highly sensitive source equipment.