Willoughby Stainless Fountains CWBF-2-RPB-HC, CWBF-2-RPB-CHD, CWBF-1, CWBF-3-RPB-HC-CHD, CWBF-2-RPB-PET Installation & Operation Manual

...
CWBF-1
Installation &
Operation Manual
CWBF Series
Outdoor Bottle Fillers Adjustable Push Button and Battery Operated Infrared
Table of Contents
Pre-Installation Information �������������������������������������2 Standard Bottle Filler Congurations ���������������������� 3 Physical Dimensions ����������������������������������������������4
Rough-in Dimensions ���������������������������������������������5 Required Installation Supplies �������������������������������� 6
Parts List and Exploded-view Drawings ����������������� 7 Hardware Identication ����������������������������������������10
Installation Instructions ���������������������������������������������
Step 1: Fixture Installation ������������������������������� 11 Step 2A: Adjusting Drinking Spout Flow ����������12 Step 2B: Battery Operated Infrared Sensor Startup ����������������������������������������������� 12
Care and Maintenance �����������������������������������������13
Troubleshooting ��������������������������������������������������������
Fixture Plumbing ����������������������������������������������� 14
Infrared Sensor ������������������������������������������������� 15
Drawings �������������������������������������������������������������������
Physical Dimensions ����������������������������������������16
Rough-in Dimensions ���������������������������������������19 Push Button Details ������������������������������������������ 21 Freeze Resistant Valve Installation Details������� 22
Warranty ���������������������������������������������������������������25
Rev. 3/2018
Willoughby Stainless Fountains
5105 West 78th Street Indianapolis, IN 46268 Toll Free: (800) 428-4065 Local: (317) 875-0830
Fax: (317) 875-0837 www.willoughbystainlessfountains.com
MADE IN THE U.S.A.
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
INSTALLATION INSTRUCTIONS
Installation notice!
INSTALLATION INSTRUCTIONS
Installation notice!
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Pre-Installation Information
Check Rough-In location PRIOR to installation
Flush lines thoroughly PRIOR to hook-up
When installing the Willoughby Stainless Fountains' CWBF Series bottle ller system:
Before Step 1 of the installation instructions, ensure that rough-ins are in the correct location.
The valve assembly, including the spray head, MUST NOT BE connected until after all lines have been ushed to remove the small particles of debris that are inherent with new construction projects and all chemicals that are used in ushing are purged from the system.
Chemicals used in ushing plumbing systems can attack the internal components of the valve and spray head and severely damage them, so any ushing of the system must be followed by a full ushing with pure water to clear any harsh chemicals remaining in the system. Debris in the system if allowed to enter the valve assembly and spray head can cause poor performance or outright failure.
Again DO NOT attempt to connect the valve assembly and spray head until after all ushing is complete and pure water is the only media that will be passing through the system. Damage to the valve assembly or spray head caused by harsh chemicals or debris will not be covered by the manufacturer's warranty.
Any ttings provided by the installer should be made of plastic to electrically isolate the unit from the building or connected plumbing system.
The grounding of electric equipment such as telephones, computers, etc, to water lines is a common procedure. This grounding can cause electrical feedback into a water fountain or similar xture, causing electrolysis, which results in a metallic taste or an increase in the metal content of the water. This can easily be avoided by using the proper materials as indicated.
Check Rough-In location PRIOR to installation
Flush lines thoroughly PRIOR to hook-up
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 2Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Standard Bottle Filler Congurations-
CWBF Series
CWBF-1
CWBF-3-RPB-HC-CHD CWBF-3-RPB-HC-PET CWBF-3-RPB-CHD-PET
CWBF-2-RPB-HC
CWBF-2-RPB-CHD
CWBF-2-RPB-PET
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 3Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Physical Dimensions- CWBF-1
*CWBF-1 shown; for CWBF-2 and CWBF-3 model variations, refer to factory drawings. Contact Willoughby Stainles Fountains if furtherinformation is needed.
13"
4X 9/16" THRU ALL
10-3/4"
BOLT CIRCLE
(2) 8-1/2" X 6"
ACCESS COVER
26-3/4"
2-3/4"
36-1/2"
47-5/16"
RECESSED PUSH BUTTON
BOTTLE FILLER
54-1/4"
32"
8-5/8"
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 4Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Rough-In Dimensions- CWBF-1
*CWBF-1 shown; for CWBF-2 and CWBF-3 model variations, refer to factory drawings. Contact Willoughby Stainles Fountains if furtherinformation is needed.
WATER SUPPLY CONNECTION
NOTE: UNIT MUST BE DISCONNECTED AND DRAINED DURING WINTERIZATION, PER THE FOLLOWING RECOMMENDED PRACTICES:
SHUT OFF WATER SUPPLY TO FIXTURE (SUPPLY STOP AND WATER LINES BY OTHERS) DISCONNECT AND REMOVE IN-LINE FILTER PRESS AND HOLD PUSHBUTTON FOR 10 SECONDS TO ALLOW WATER LINES TO DRAIN
1-1/4" PVC COUPLING
CONCRETE PAD
3/8" TUBING
DRAIN CONNECTION
1-1/4" SCHED� 40 PVC
(BY OTHERS)
(BY OTHERS)
4X 9/16" THRU ALL
10-3/4"
BOLT CIRCLE
13"
VALVE ASSEMBLY DETAIL
#600315
VALVE ASS'Y
1/4" TUBE
#320573
REDUCER,
3/8" STEM X 1/4" TUBE
#980632
CHARCOAL FILTER, 3/8" TUBE CONNECTIONS, PRESS LOCK
NOTE: 3/8" O.D. SUPPLY CONNECTION
CONCRETE ANCHORS SERVICE SHUT-OFF VALVE
1/2"-13 UNC X 4" (4 PLCS)
OPEN HUB DRAIN TO BE 1-1/4" IPS
MINIMUM TO A POROUS GRAVEL FILL OR
MAIN SEWER LINE LOCATED BELOW
FROST LINE (BY OTHERS)
(BY OTHERS)
Willoughby Stainless Fountains
(BY OTHERS)
WATER SUPPLY
LINE
(BY OTHERS)
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 5Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Required Installation Supplies
Proper mounting hardware
Proper plastic ttings as indicated
Hardware for waste oulet connections
Gasket for waste outlet connection
Shims (for installation if necessary)
Supply piping
Silicone caulk
Installation & Operation Manual
Plumbers putty
 WARNING: Willoughby Stainless Fountains does not
assume any responsibility for personal injury or damage to equipment due to an improperly installed CWBF Series Bottle Filler
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 6Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Parts List and Exploded-view Drawing­CWBF-1
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 7Rev. 3/2018 www.willoughbystainlessfountains.com
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Installation & Operation Manual
Parts List and Exploded-view Drawing­CWBF-2-PET
Willoughby Stainless Fountains
TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837
Page 8Rev. 3/2018 www.willoughbystainlessfountains.com
Loading...
+ 17 hidden pages