Williams Sound WIR RX14-2 User Manual

FRM 451G ©2007 Williams Sound Corp

WIR RX14-2 Receiver: 2.3 MHz or 2.8 MHz

Instructions For Use & Care

SAFETY INFORMATION

Hearing Safety:

This product is designed to amplify
sounds to a high volume level which
could potentially cause hearing dam­age if used improperly. To protect your
hearing and the hearing of others:

1. Make sure the volume is turned
down before putting on the ear­phone or headphone before adjust­ing the volume to a comfortable
level.

2. Set the volume level at the mini­mum setting that you need to hear.

3. Do not allow children or other
unauthorized persons to have access
to this product.

BATTERY SAFETY & DISPOSAL

Do not attempt to recharge dispos­able batteries, which may explode,
release dangerous chemicals, cause
burns, or other serious harm to the
user or product.

PACEMAKER SAFETY

1. Before using this product with a pace­maker or other medical device, con­sult your physician or the manufactur­er of your pacemaker or other medical
device.

2. If you have a pacemaker or other med­ical device, make sure that you are using
this product in accordance with safety
guidelines established by your physician
or the pacemaker manufacturer.

CAUTION!

CAUTION!

CAUTION!

2

RECYCLING INSTRUCTIONS

Help Williams Sound protect the environment! Please take the time to dispose of
your equipment properly.

Product Recycling:

Please do NOT dispose of your Williams Sound equipment in the household trash.
Please take the equipment to a electronics recycling center; OR, return the product
to the factory for proper disposal.

Battery Recycling:

Please do NOT dispose of used batteries in the household trash. Please take the
batteries to a retail or community collection point for recycling.

5/10/06

APPROVALS

This product meets approval standards established for:

3

O

PERATINGINSTRUCTIONS

1. Turn the receiver’s Power Switch to ON.

2. Place the headset on your head and adjust the headband size by pulling or pushing
on each earpiece.

3. Locate and adjust the individual volume controls for a comfortable listening level.

4. Choose between 2.3 MHz or 2.8 MHz operation by pressing the frequency selector
button on the left earphone. NOTE: Be sure the infrared transmitter being used is
transmitting on 2.3 MHz or 2.8 MHz!

I

MPORTANT

The infrared receiver “eye” is located directly above the battery compartment (see
illustration). Do not cover it up or you will lose reception.

Note: To maximize battery life, turn the receiver OFF when it’s not in use.

RoHS

WEEE

RX14-2 Headset Receiver

FRONT VIEW

4

LIMITED WARRANTY

Williams Sound products are engineered,
designed and manufactured under careful­ly controlled conditions to provide you
with many years of reliable service.
Williams Sound warrants the Infrared
Receiver against defects in materials and
workmanship for FIVE (5) years. During
the first five years from the purchase date,
we will promptly repair or replace the
Infrared Receiver.

Earphones, headphones, batteries, cables,
carry cases, and all other accessory prod­ucts carry a 90-day warranty.

WILLIAMS SOUND HAS NO CON­TROL OVER THE CONDITIONS
UNDER WHICH THIS PRODUCT IS
USED. WILLIAMS SOUND, THERE­FORE, DISCLAIMS ALL WARRANTIES
NOT SET FORTH ABOVE, BOTH
EXPRESS AND IMPLIED, WITH
RESPECT TO THE INFRARED
RECEIVER, INCLUDING BUT NOT
LIMITED TO, ANY IMPLIED WAR­RANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PUR­POSE. WILLIAMS SOUND SHALL
NOT BE LIABLE TO ANY PERSON OR
ENTITY FOR ANY MEDICAL EXPENS­ES OR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
CAUSED BY ANY USE, DEFECT,

5

If you experience difficulty with your system, call Toll-Free for Customer Assistance:

1-800-843-3544

If it is necessary to return the system for service, your Customer Service Representative
will give you a Return Authorization Number (RA) and shipping instructions.

Pack the system carefully and send it to:

Williams Sound Corp.
Attn: Repair Dept.
10321 West 70th Street
Eden Prairie, MN 55344

FAILURE OR MALFUNCTION OF THE
PRODUCT, WHETHER A CLAIM FOR
SUCH DAMAGES IS BASED UPON
WARRANTY, CONTRACT, TORT OR
OTHERWISE. THE SOLE REMEDY
FOR ANY DEFECT, FAILURE OR MAL­FUNCTION OF THE PRODUCT IS
REPLACEMENT OF THE PRODUCT.
NO PERSON HAS ANY AUTHORITY
TO BIND WILLIAMS SOUND TO ANY
REPRESENTATION OR WARRANTY
WITH RESPECT TO THE INFRARED
RECEIVER. UNAUTHORIZED
REPAIRS OR MODIFICATIONS WILL
VOID THE WARRANTY.

The exclusions and limitations set out
above are not intended to, and should not
be construed so as to contravene mandato­ry provisions of applicable law. If any part
or term of this Disclaimer of Warranty is
held to be illegal, unenforceable or in con­flict with applicable law by a court of com­petent jurisdiction, the validity of the
remaining portions of this Disclaimer of
Warranty shall not be affected, and all
rights and obligations shall be construed
and enforced as if this Limited Warranty
did not contain the particular part or term
held to be invalid.

BATTERY INSTRUCTIONS

This receiver comes standard with disposable AAAAlkaline batteries (BAT 010).
Rechargeable AAA NiMH batteries (BAT 022) may also be used (not included).

EXPECTED BATTERY LIFE

BAT 010 AAA Alkaline batteries 50 hours
BAT 022 AAA NiMH batteries 8 hours per charge

Batteries from other suppliers may provide different operating life.

INSTALLING AND REPLACING BATTERIES

1. The bottom of each battery compartment has a marked “arrow.” Apply
pressure to the arrow and pull the compartment open.

2. Remove depleted batteries.

3. To install new batteries, press them into place, observing proper polarity

(+/–).

4. Close the battery compartment by inserting the cover top first (tabbed), then
snap the bottom into place.

5. When the sound becomes weak or distorted, replace or recharge batteries.

6. If using rechargeable batteries, charge batteries overnight prior to operating.

Do not mix batteries and chargers from different suppliers.

WARNING: DO NOT ATTEMPT TO RECHARGE
NON-RECHARGEABLE BATTERIES!

FRM 451G ©2007 Williams Sound Corp