Williams Sound WF SY5 PRO-12 Specifications

SPECIFICATION DATA

WaveCast

WF T5

WaveCAST provides true, professional audio quality over Wi-Fi , and features DSP audio processing. Setting up and configuring the
WaveCAST for the Wi-Fi network is straightforward and simple. Up to four WaveCAST systems can be connected to the same Wi-Fi
network to provide multiple listening channels, supporting 45 users in unicast mode or 1500+ users in multicast mode.

The WaveCAST audio processor oers multiple preset audio options. The high quality audio can be optimized for hearing assistance,
music can have high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be created to
meet specific performance needs.

WaveCAST (WF T5)

Dimensions 8.45” W x 8.25” D x 1.72”H (21.5 cm x 21 cm x 4.4 cm)

Weight Transmitter: 3.0 lbs (1.36 kg)

Color Black/Silver with silver legends on the front, white legends on the back

Rack Mount Standard 19” Rack, one EIA rack space high, 1/2 space wide

Power Supply Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750

Power ON Indicator Push On/Push O latching power button, backlit green indicates power ON, backlight o indicates power

Temperature Range Operating: +32° F to +104° F (0° C to 40° C); Storage: -4° F to +158° F (-20° C to 70° C)

Audio Processor Functions DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control

Frequency Response 31 – 16000 Hz, ±3 dB (“Music” Audio Preset)

Signal-to-Noise Ratio ≥74 dB Transmitted RF

1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack
Mount Kits

mA, 18W. 2.5mm ID center positive barrel connector

OFF, fading from bright to dark indicates Sleep Mode.

© 2019, Williams AV, LLC MCAT 261A

SPECIFICATION DATA

Total Harmonic Distortion Less than 0.25% @ 1 kHz (RF output)

Common Mode Rejection >57 dB @ 1 kHz, Mic or Line

Audio Inputs (1x) Combination 3-pin XLR, 1/4” (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line

Audio Input Gain Adjust In menu, adjustable to 0 to -50 dB, in 1dB steps

Phantom Power 14.4 VDC applied through 2.2 kΩ resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring

Audio Level Indicators 10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate

Headphone Output 1/4” TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB

Line Output RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ω

Input Levels (Bal or Unbal)

(at Audio Input Gain = 0dB)

Microphone -55 dBV (1.7 mV RMS) -15 dBV (180 mV RMS)

Ethernet RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3

Approvals FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme

Warranty 2-year parts and labor

Level, or balanced or unbalanced microphone with Selectable Phantom Power

on 1/4” TRS jack

normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates
overload peaks

steps)

Nominal (1st Amber LED) Overload Warning

(Displayed on Screen)

Line -25 dBV (55 mV RMS) +16 dBV (6.3 V RMS)

compliant, unique MAC address