Williams Sound R1-216 User Manual
ONE 2 ONE
™
FM Receiver
• Model R1-216
ONE 2 ONE™FM Receiver
• Model R1-216
©2007, Williams Sound Corp. MCAT
013C 1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
Description:
The PPA R1-216 is narrowband, single-channel, body-pack style receiver that operates on the 216 MHz
bandwidth. It features an impact-resistant case and a belt clip for hands-free operation. Each receiver is
pretuned, and field adjustable by internal tuning coil. The R1-216 will operate up to 100-300 feet when
used with a T1-216 transmitter. A 3.5 mm mono phone jack accommodates low-impedance mono earphones, headphones and neckloop telecoil couplers. Operating on two (2) AA batteries, each unit will
perform continuously up to 20 long-lasting hours. Alternatively, NiMH AA rechargeable batteries can be
used for 15 hours of performance. Each receiver features drop-in charging points, which allows up to 16
units to be charged at once in a single CHG 1600 multi-charger.
Applications:
• Group Tours • Destination Marketing Organizations • Cruise Ships • Tourism Offices
• University Tours • Large-Scale Guide
Dimensions: 3-5/8" L x 2-3/8" W x 7/8" H (92.1 mm x 60.3 mm x 22.2 mm)
Weight: 4.6 oz (130 g) with batteries
Color: Neptune blue, shatter-resistant polypropylene
Battery Type: Two (2) AA 1.5 V non-rechargeable Alkaline batteries
(BAT 001), 50 mA nom. current drain, 20 hours approx. life
(OR) Two (2) AA 1.5 V NiMH rechargeable batteries (BAT
026), 50 mA nominal current drain, 14 hours per charge
approx., recharges in 14-16 hours, uses CHG 1600 Multiple
Battery Charger
Operating Frequencies: 216.325 MHz, standard (216.425, 216.625, 216.725 MHz
optional)
Stability: ± .005%, crystal reference, PLL
FM Deviation: Narrow-band FM, 10 kHz P-P, 100 µS de-emphasis
AFC Range: ± 120 kHz
Sensitivity: .5 µV at 12 dB Sinad with squelch defeated,
squelches at 8 µV for min. 50 dB S/N ratio
Freq Response: 200 Hz to 10 kHz P-P, +2, -4 dB
Signal-to-Noise Ratio: 60 dB at 10 µV
Receive Antenna: Integral with earphone cord
Audio Output: 35 mW, max. at 16 Ω; for use with 8–32 Ω mono headphones
Output Connector: 3.5 mm mono phone jack
Squelch: Set to turn off audio under weak or no signal condition
Controls: Volume: thumbwheel/on/off/volume
Indicators: “On” LED
Note: Specifications are electrical performance
Approvals: FCC, WEEE
Warranty: 5 years, parts and labor*
R1-216 Receiver:
*90 days on accessories.
Headphone
Jack
EAR
Hearing Helper
Hearing Helper
"On" Indicator LED
Volume
1
R1-216 Top
Williams Sound
Williams Sound
R1-216 Front
On/Off
Vol ume
Control
®
®
ONE 2 ONE
™
FM Receiver
• Model R1-216
ONE 2 ONE™FM Receiver
• Model R1-216
©2007, Williams Sound Corp. MCAT
013C 2
Bid Specs:
The PPA R1-216 receiver shall be housed in an impact resistant plastic case with a hinged battery door
that does not separate from the receiver. The receivers shall be a body-pack type and include a belt-clip
case for hands-free operation. The receiver shall have a 3.5 mm mono phone jack and accommodate lowimpedance mono earphones, headphones and neckloop telecoil couplers. It shall have drop-in charging
points on the bottom of the unit. Receiver frequencies shall be pre-tuned and adjustable by means of an
internal tuning coil. A four-channel receiver model shall be available for use with the system. The
receivers shall receive FM signals in the 216 MHz bandwidth with 100 µS de-emphasis. The receivers shall
provide a maximum output of 35 mW at 16 Ohms with an earbud-type earphone. The system electrical
frequency response shall be 200 Hz to 10 kHz P-P, +2, -4 dB and the signal-to-noise ratio shall be 60 dB at
10 µV. The receiver shall have FCC and WEEE approval and be covered by a five-year parts and labor warranty.* The receiver model shall be the Williams Sound Corp. model PPA R1-216.
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
*90 days on accessories.
Loading...