Williams Sound FM-T55-WC2, FM-T55-WC1 Data Sheet

Worship System Installation

To set up the Worship Communication System:

1. Remove all components from the box.

2. Connect power to FM +Transmitter, Wireless Access Point, Router, and
POE Injector.

3. Connect a Cat5e cable from the Power Over Ethernet (POE) Injector In
Port on the Wireless Access Point to Data Out Port of the POE Injector.

4. Connect a Cat5e cable from Data In Port on the POE Injector to the LAN
1 Port on the Router.

5. Connect Cat5e cable from LAN 2 Port of the Router to the Ethernet Port
on the FM+.

6. Use the provided bracket to attach the Wireless Access Point onto the
folding stand.

7. Adjust the folding stand to the tallest setting.

8. Follow instructions for setting up your FM + system and wireless network.

To listen to WaveCAST Audio on Personal Devices:

1. Listeners will need to download the WaveCAST App to their personal device from the Apple App Store or Google Play Store (App is
iOS and Android compatible)

2. On a personal device with the WaveCAST App installed, join the worship communications system’s WaveCAST Wi-fi Network.

3. Tap on the WaveCAST Audio Receiver app on the personal device and select a channel to listen to the audio.

If personal devices are not available, distribute FM or WaveCAST Receivers (purchased separately) and select a channel to listen to the
audio.

[e-mail] / www.williamsav.com

800-843-3544 / INTL: [phone]

© 2020, Williams AV, LLC TCH 046A