Page 1
Point Reyes Mirror Rectangular
TOOLS NEEDED (not included):
1
2
Measure the distance between the center of the
Three Hole in metal cleats.
With the back of the mirror facing [e] away from the
wall, hold it again
location. Mark two reference points (A, B) on the
wall as shown.
Hanging Orientation Options:
Mounting Instructions:
Williams Sonoma Home
Mounting Instructions
st the wall at a desired mounting
P: 1 / 3
Page 2
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
For stud mounting:
Tips:
The
No pilot hole required.
3
5
For non-stud mounting:
4
Make three insertion marks (C, D, E,) centered along the line using the measurement “a”.
Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as shown below.
anchor is self-drillable.
P: 2 / 3
Page 3
6
With the help of another person, hang the mirror to the wall so that the Cleats engage in the Wall.
CARE INSTRUCTIONS:
- To clean the frame of the mirror, wipe with a soft, dry cloth. Do not use abrasive or strong chemical household
cleaners.
- A household glass cleaner may be used for the mirror surface – spray the cleaner on a clean cloth first and then use
the cloth to clean the glass.
Thank you for your purchase!
Stores | Catalog | www.williams-sonomahome.com
P: 3 / 3
Loading...