Assembly Procedures:
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Important safety instructions:
Please carefully read all instructions before assembling the table.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
1. Assembled the table on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
1) Place the clear plastic pad (H1) on the top of metal base (P2) as shown below.
2) Gently lay the top glass (P1) on the metal base (P2).
3)
H1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Loading...