Wilko HG1449WK Assembly Instruction Manual
4 BURNER GAS BBQ
Assembly instruction (0408877)
0359-17
1
Expanded View
13
13
13
12
13
11
6
23
17
10
10
1
9
22
21
2
5
7
16
18
8
19
21
4
3
4
4
6
6
6
10
10
10
14
15
20
23
24
25
2
Parts Supplied
Please check parts against the list below before assembling your Barbecue Grill.
Take a few moments to familiarise yourself with the contents. Check that all holes are clear of paint before assembly, if
you find a blockage, please use a screw driver to clear the blocked hole.
1
Lid handle
1
13
Tool Hook
4
2
Temperature gauge
Warming rack
3
4
Cooking grid
Lid & Fire-bowl
5
assembly
6
Heat plate
7
Side burner grid
Side burner
8
14
1
1
3
1
4
1
1
Grease cup
Grease tray
15
Right si de shelf
16
for side burner
Left cart frame
17
Right cart frame
18
19
Lighting hook
Rear cart frame
20
support
Wheel
21
Axle
22
1
1
1
1
1
1
1
2
1
Control knob plate
9
10
Control knob
1
5
End cap of left cart
23
frame
Upper fro n t panel
24
Left side shelf with
11
bottle opener
Tool Holder
12
1
1
Lower front panel
25
3
2
1
1
Fittings Supplied
Screw ST4.8x10
A
2
F
Wing nut M6
2
B
Screw M4x10
M6x16
Bolt
C
D
Wing bolt M6x10
4
28
1
G
Washer 6
Lock washer
H
I
Screwdriver
6
6
6
1
E
Nut M10
2
J
Wrench M6 & M10
2
Screwdriver (included), wrench (included) and plastic head hammer (not included) are
required to assemble the Barbecue.
• Dispose of all polythene packing carefully and keep out of the reach of children.
• Please read the section on barbecue safety prior to using your Barbecue.
• Two people are recommended for assembly.
Please read all instructions carefully and keep outer packaging to refer to photograph of finished product in case of
difficulty.
Warning
1, Use outdoor only.
2, Read the instructions before using the appliance.
3, WARNING: Accessible parts may be very hot. Keep young children away.
4, This appliance must be kept away from flammable materials during use.
5, Do not move the appliance during use.
6, Turn off the gas supply at the gas cylinder after use.
7, Do not modify the appliance.
8, Gas cylinder can’t be used or stored underneath the fire bowl or in the grill cabinet.
4
Assembly
Please read all instructions thoroughly before proceeding. Find a large, cle an area in which to assembl e your barbecue.
Please refer to parts list and assembly diagram as necessary. Assembly of the barbecue involves many large
components, it is advisable to have two people assemble the unit.
STEP 1:
A: Att ach end cap of left cart frame (23) to left cart frame (17) ((A) Screw 2Pcs).
Note:
- Use plastic head hammer slowly and gently to strike on the end cap of left cart frame insert into frame tubes if
needed.
- Make sure the left cart frame must be faced to the correct orient ation as shown in below diagrams.
(17)
5
(A)
(23)
(A)
(23)
STEP 2:
A: Att ach axle (22), wheel (21) to right cart frame (18) ((E) Nut 2Pcs).
Note: Make sure the right cart frame must be faced to the correct orientation as shown in below diagrams.
STEP 3:
A: Att ach upper front panel (24) and lower front panel (25) to the assembled cart frame ((C) Bolt 8Pcs).
Note: Make sure the left and right cart frame must be faced to the correct orientation as shown in below di agram.
(21)
(E)
(18)
(22)
(21)
(E)
(C)
(C)
(24)
(C)
(C)
(C)
(25)
(C)
(C)
(C)
6
STEP 4:
A: Att ach rear cart frame support (20) to the assembled cart frame ((C) Bolt 4Pcs).
STEP 5:
A: Att ach lighting hook (19) to the assembled right cart frame ((D) Wing bolt 1Pc).
B: Hang the lighting hook onto wing bolt.
(C)
(C)
(20)
(C)
(C)
(D)
(19)
(D)
(19)
1
7
2
Loading...