Wilier Cento1 Hybrid Quick Start For First Time Use

1

!

!

QUICK START FOR FIRST TIME USE

HOW TO USE THE BIKE

The Cento1 Hybrid can be used both as a normal road bike and with assisted pedalling active. Assisted pedalling can
be activated / selected using the iWOC button located on the top tube near the handlebar. For a more interactive
experience with the Cento1 Hybrid, we recommend downloading and using the eBikeMotion App.

Before use, carefully read the Wilier Triestina User Manual and the eBikeMotion Quick Guides, which you were given
along with the Cento1 Hybrid.

FIRST STEPS FOR USING YOUR CENTO1 HYBRID

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

Check that the battery on your Cento1 Hybrid is sufficiently charged before use.

To charge the battery:

1. Connect the charger you were given when you received the bike to a power
outlet.

2. Connect the charger to the charging socket on your Cento1 Hybrid (B).
Be careful to insert the plug correctly: the arrows present on both parts
(plug and socket) must line up; once the cable has been connected to the
charging socket, we recommend stabilising the connection by tightening
the safety ring.

!

A: iWOC button

B: Charging socket

C: X35 Motor

2

!

3. Disconnect the bike from the charger once the iWOC button located on the top tube (A) of the frame begins
to blink with a white light (this means that the battery is over 75% charged). You can get a specific reading of
the battery level at any time by checking the eBikeMotion app.

4. Your Cento1 Hybrid is now ready for use. To turn on the system press the iWOC button. The LED will come
on with a fixed light, indicating the battery level: !

!

SELECTING THE LEVEL OF ASSISTANCE

The Cento1 Hybrid can be used in active mode by using the iWOC button located on the frame's top tube. Three
different levels of assisted pedalling are available: when the system is turned on, by lightly pressing the iWOC button,
the LED light will blink with a colour that represents the level of assistance currently active:

green = soft level 1
yellow = intermediate level 2
red = max level 3
white = no assisted pedalling.
The level of assistance can be changed (even while pedalling).

1. Lightly press the iWOC button to activate the selection system (the light will blink).

2. While the light is blinking, select the desired level of assistance by pressing lightly.

To deactivate assisted pedalling, press the iWOC button for 3 seconds: the LED light will blink twice before turning
off. The system turns off automatically after an hour if is not being used.

USING THE CENTO1 HYBRID WITH THE EBIKEMOTION APP

The eBikeMotion app was created to give you access to "smart" use of your Cento1 Hybrid. The app will allow you to
monitor your activity and will provide a complete overview of your performance.

INSTALLING THE APP

Download the eBikeMotion APP to your smartphone or tablet (icon with azure background). You can find the app on
the Google PlayStore (for Android) or APP Store (for iOS).

WARNING: some Android versions are not yet compatible with the “eBikeMotion” app.

ebikemotion USER APP ICON