User Guide
Professional Entertainment Technology
Page 2
1. Introduction
2. Safety Instruction
3. WT-KLD
3.1 Change lamp
3.2 Beam angle
4. WT-LGP
4.1 Change lamp
4.2 Inserting/ Exchanging rotating gobos
4.3 Beam angle
5. WT-CUB
5.1 Change lamp
5.2 Beam angle
6. WT-FST/ WT-GBF
6.1 Change lamp
6.2 Beam angle
7. WT-OIL/ WT-OIL 150/ WT-OIL 250
7.1 Change lamp
7.2 Change oil wheel
7.3 Beam angle
8. WT-HLC/ WT-FAN/ WT-OBT
8.1 Exchanging rotating gobos/ Change lamp
8.2 Beam angle
9. WT-WAV/ WT-IFO
9.1 Change lamp
9.2 Beam angle
10. Troubleshooting
11. CA-16/ CA-416
11.1 Install & Connection
12. Fixture Cleaning
1. Introduction
Thank you for purchasing Wild Tech products. To familiarize yourself with the unit and for your own
safety, please carefully read the instructions which include important information about installation,
operation, and maintenance.
Hereunder is a brief introduction of what is “ Wild Tech ”:
Every single species that survives in the wild is equipped with a particular technique…… As does
Acme’s Wild Tech. Why not show off!
Wild tech is a collection of unique, gorgeous disco lights that comes with flawless engineering to
create impressive, amazing effects. Offering a comprehensive range of effect possibilities, Wild Tech
starts from the introduction of Kaleido, Cubist, Hallucination, …… Inferno to Logo Projector, covering
DJs’ various needs in lighting effects.
By combining the latest technology and innovative ideas, Wild Tech features excellent optics, special
designed gobo and effect wheels, bright and powerful light output, perfect for discotheques, clubs,
pubs, mobile DJs, and home parties. A considerate design of Wild Tech DMX controller CA-16 and a
DMX Switch Pack CA-416 are added for the control of power on/off. Wild Tech is both affordable and
very easy to use.
Remaining cool all night, Wild Tech brings you endless effects with boundless energies. Come
experience Wild Tech and go wild.
Page 3
2. Safety Instruction
WARNING
♦ Please keep this
User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this
instruction booklet.
♦
Unpack and check carefully there is no transportation damage before using the unit.
♦
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the
unit.
♦
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
♦
The unit is for indoor use only. Use only in a dry location.
♦
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be
sure that no ventilation slots are blocked.
♦
Disconnect mains power before fuse/lamp replacement or servicing.
♦
Replace fuse/lamp only with the same type.
♦
Make sure there is no flammable materials close to the unit while operating as it is fire hazard.
♦
Use safety cable when fixes this unit.
♦
Maximum ambient temperature is TA: 40 . Don’t operate it where the temperature is higher than this.
♦
Unit surface temperature may reach up to 85 . Don’t touch the housing bare-hand during its operation. Turn off
the power and allow about 15 minutes for the unit to cool down before replacing bulb or serving.
♦
In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type spare parts.
♦
Don’t connect the device to any dimmer pack or power pack.
♦
Do not touch any wire during operation as high voltage might be causing electric shock.
Warning
♦
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
♦
Never touch bulb with bare fingers as it is very hot after using.
♦
Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.
♦
Do not start on the unit without bulb enclosure or housing are damaged.
♦
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
♦
Do not look directly at the light while the bulb is on.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself.
In the unlikely event your unit may require service, please contact your nearest dealer.
Rigging the fixtures
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The installation must be carried out by qualified service people only. The device should be installed out of
reach of people and outside areas where persons may walk by or be seated.
3. WT- KLD
Please read carefully the instruction, which includes important information about
the installation, usage and maintenance.
Page 4
Kaleido is a unique 250W kaleidoscopic effect that projects a swarm of swirling patterns. Comes with great built-in
programs with auto movement or sound activation. It's linkable, performing synchronized light show, perfect for
discos, clubs, bars, and parties.
• Precise optics with special gobo / color wheel.
• Linkable by using stereo cable with 3.5mm stereo jack ( optional )
• Focus adjustable and fan cooled.
• Optional easy controller CA-8 for many lighting shows .
Stand by
Blackout the unit
Function
Speed of gobo wheel and
mirrored-tunnel: Fast and
slow
Speed of gobo wheel and
mirrored-tunnel: Fast and
slow
a.) Adjust gobo wheel rotating direction
and speed.
b.) Adjust mirrored-tunnel rotating
direction and speed.
Mode
Sound
(LED off )
Auto
(LED on)
Latch
(LED blinking)
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 306 x 263 x 140 mm
• Weight: 8 kgs
3.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it
is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
Pull the socket off the lamp. Do not pull the wires.
3.2 Beam angle
The Projector is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of
3.7 m x 3.7 m.
4. WT-LGP
Logo Projector is a powerful tool creating a long lasting visual effect. It comes with 7 D size gobos and an
interchangeable slot for custom made gobos. With speed and direction adjustable function, the Logo projector is
perfect for discos, restaurants, department stores, etc.
• Adjustable gobo rotation direction and speed.
• With an optional CA-5 easy controller for the on/off control.
• Focus adjustable and fan cooled.
Page 5
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: EHJ 24V 250W
• Dimension: 306 x 263 x 140 mm
• Weight: 8.2 kgs
4.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it is
hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
Pull the socket off the lamp.
Do not pull the wires.
4.2 Inserting/Exchanging rotating gobos
Gobo list:
4.3 Beam angle
The Projector is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of
2.1 m x 2.1 m.
5. WT-CUB
Cubist is a great 3D high precision optical effect with 12 patterns, delivering amazing lighting shows. Comes with
great built-in programs with auto movement or sound activation, ideal for discos, pubs, parties, etc.
• Focus adjustable and fan cooled.
• Optional easy controller CA-8 for many lighting shows .
Stand by
Blackout the unit
Function
Gobo wheel and inner
dish activated by music
Select Gobo
( Inner dish activated by music )
Select Gobo
( Inner dish – static )
Page 6
Mode
Sound
(LED off )
Next
(LED on)
Latch
(LED blinking)
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 306 x 263 x 140 mm
• Weight: 8.2 kgs
5.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with
a lint free cloth before installing.
Pull the socket off the lamp.
Do not pull the wires.
The Projector is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of
3.7 m x 3.7 m.
6. WT- FST/ WT- GBF
WT-FST
Fiesta is a high output special event projector, equipped with 12 event gobos. It offers the choice of stop,
continuous or sound activation, satisfying all applications. The unit is perfect for discos, clubs, bars, and parties.
WT-GBF
With 12 gobos/ colors, precise optics, and 250W powerful output, the Gobo Flower is perfect for discos, clubs,
bars, and parties.
• Fan cooled and thermal switch for overheat protection.
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 306 x 263 x 140 mm
• Weight: 8 kgs
5.2 Beam angle
Page 7
6.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with
a lint free cloth before installing.
Pull the socket off the lamp.
Do not pull the wires.
6.2 Beam angle
WT-FST is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 3.3 m
x 3.3 m.
The Projector is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 4
m x 4 m.
7. WT-OIL/ WT-OIL 150/ WT-OIL 250
Oil light is an awesome effects projector, equipped with an oil wheel to project psychedelic effects. The colorful
and ever-changing-shape effects are ideal for background projection. Perfect for discos, clubs, bars, and parties.
• Adjustable oil wheel speed .
• Zoom function and focus adjustable.
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: EHJ 24V 250W / CDM 150W G12 / MSD 250W GY 9.5
• Dimension: 306 x 263 x 140 mm
• Weight: 9.2 kgs
7.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with
a lint free cloth before installing.
• Turn off the mains power immediately in case the motor broken or the lighting effect stops rotating to avoid the
risk of oil wheel breaking.
Page 8
Change lamp Change oil wheel
Pull the socket off the lamp.
Do not pull the wires.
7.2 Change oil wheel
Be sure to turn off mains power before changing Oil Wheel. Unscrew the screw on the oil wheel motor to change
the oil wheel. If the position of the screw doesn’t face you when you open the cover, power on the unit again to
turn the position of screw. Don’t push the Oil wheel by hand when the screw doesn’t face you.
7. Beam angle
The Projector is best to be placed 5 meters from wall, and from this distance the light effect will cover an area from
2.3 m x 2.3 m (min.) to 3.1 m x 3.1 m.
8. WT- HLC/ WT- FAN/ WT- OBT
WT- HLC
Hallucination is a powerful 250W effect lights, featuring a slow rotating effects wheel and a static effect glass. It
projects a beam through effect glasses onto a multi-colored dischroic dish, creating a hallucinary effect. Add a
selector switch to select between auto, sound activation, or static function. This fixture is perfect for clubs, pubs,
bars, parties, and mobile DJs.
• Focus adjustable, fan cooled, and easy lamp access door.
WT- FAN
Fascination is a powerful 250W backgound creation effect which projects a beam through a replaceable, rotating
glass effect wheel onto a mullti-colored dischroic dish, creating an ever changing atmosphere.
Add a selector switch to select between auto, sound activation, or static function. This fixture is perfect for clubs,
pubs, bars, parties, and mobile DJs.
• Focus adjustable, and fan cooled.
WT- OBT
Orbiter is a powerful 250W effect lights, featuring a gobo wheel and multi-colored dischroic dish that rotates back
and forth, creating dynamic swiveling effects. Add a selector switch to select between auto, sound activation, or
static function. This fixture is perfect for clubs, pubs, bars, parties, and mobile DJs.
• Focus adjustable, and fan cooled.
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
Page 9
• Bulb: ELC 24V 250W
• Dimension: 270 x 192 x 120 mm
• Weight: 5.3 kgs
8. 1 Exchanging rotating gobos/ Change lamp
Exchanging rotating
gobos for WT-FAN
only!
Change lamp
8. 2 Beam angle
WT-HLC is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 8.5 m
x 5 m.
WT-FAN is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 9 m x
5 m.
WT-OBT is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 9 m x
5.2 m.
9. WT- WAV / WT- IFO
WT- WAV
Water Wave is a flowing water effect with a powerful 250W light output which is ideal for background back ground
projection. This unit is perfect for clubs, bars, parties, karaoke, etc.
• Equipped with 2 effect wheels and 1 independent dichroic color wheel, making the water waving at any place
where needs special atmosphere.
• Focus adjustable, fan cooled, and easy lamp access door.
WT- IFO
Inferno is a unique projector creating flame effects to produce a blazing inferno. It's a great effect to set any venue
on fire, perfect for clubs, pubs, bars, parties, etc.
• Focus adjustable and easy lamp access door. Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 270 x 192 x 120 mm
• Weight:: 7.2 kgs(WT-WAV) / 7 kgs(WT-IFO)
9.1 Change lamp
• Always switch off the mains supply and never handle the lamp or luminaire when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with
Page 10
WT-WAV is best to be placed 5 meters from wall, and from this distance the light effect will cover the area of 4 m x
4 m.
WT-IFO is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 3.1 m x
3.1 m.
10. CA-16/ CA-416
CA-16
• Power input: DC 9V 500mA Min.
• 16-Channels controller with 16 buttons and indicators,very easy to use.
• The Wild Tech controller can perfectly work with CA-416 for best control of 16-channel power on/off.
• 16 channels DMX output.
• Dimension: 482 x 63 x 44 mm
• Weight: 1 kgs
CA-416
• Power supply: DC 9V 500mA Min.
• Bulb: 6.3A per channel(Max.).total 15A.
• 4-Channel switch pack with DMX input/output.
• Dip switches for DMX address setting.
• Main input: AC 120V/230V +/- 10% with Maximum 15A fuse holder.
• Output: 6.3A per channels for each socket.
• 4 LEDs indicate the outputs on both the front and back panels.
• 1 Power indicator on the back panel.
• Dimension: 480 x 100 x 88 mm
• Weight: 2.4 kgs
10.1 Install & Connection
1. Please refer to the diagram below for connecting CA-16, CA-416 and Wild Tech lights.
2. Set the CA-416 DMX address as 1,5,9,13 refer to the following dipswitch diagram.
3. Press the 1-16 buttons of CA-16 to control the lights power on/off.
a lint free cloth before installing.
• Pull the socket off the lamp. Do not pull the wires.
9.2 Beam angle
Page 11
11. Troubleshooting
Problem
Probable cause(s)
Suggested remedy
No light
No power to the fixture
Check power connections
Blown fuse
If power is applied but does not
light, please check and replace
fuse if necessary.
Burned out lamp
Install new lamp.
Fixture too hot
Allow to cool down. Improve air
flow around the unit.
No action
Sound too low to activate control
circuit
Increase volume.
Electrical malfunction
Refer to service technician.
12. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically
to optimize light output. Cleaning frequency depends on the environment in which the fixture
operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on
the unit’s optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Page 12
EC Declaration of Conformity
We declare that our products (lighting equipments) comply with the following
specification and bears CE mark in accordance with the provision of the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
EN55014-2: 1997 A1:2001, EN61000-4-2: 1995; EN61000-4-3:2002;
EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6:1996,
EN61000-4-11: 1994.
&
Harmonized Standard
EN60598-1: 2000+ALL:2000+A12:2002
Safety of household and similar electrical appliances
Part 1 : General requirements
Innovation , Quality , Performance
Loading...