Sewing Table- White
Assembly Instructions
Sewing Table-White
Parts List
parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call
customer service if hardware is missing. Before beginning assembly, carefully study the diagrams
below and sort your hardware according to the pictures. Using the incorrect hardware will cause
A
Left Wood Top
D
Please check packaging for all parts and hardware before discarding. Unpack and lay
damage.
B
Quantity
Of 1
Quantity
Of 1
Leaf Panel
E
Quantity
Of 1
Quantity
Quantity
Of 2
Of 1
C
Quantity
Upper Shelf
F
Quantity
Of 1
Of 1
Lower Shelf
G
Leaf Support
J
Quantity
Of 1
Quantity
Of 1
Large Shelf
H
Right Side Panel
K
Quantity
Of 1
Quantity
Of 1
Back Panel
I
Left Side Panel
L
Quantity
Of 1
Quantity
Of 1
Divider
Bottom Front Stretcher
Top stretcher
1
Quantity
Of 28
Wood Dowel ∮8*30mm
4
Quantity
Cover
7
Quantity
Unlocking Caster
10
Quantity
Of
Of
Of
4
2
2
2
Quantity
Of 11
Cam Bolt ∮6.8*36mm
5
Quantity
Large-Machine-screw1/4*2mm
8
Locking Caster
11
Quantity
Of 12
Of 12
Quantity
Of
2
3
Cam Lock∮15*12
6
T-Bolt
9
Quantity
Small-Machine-screw M5
12
Quantity
Of 11
Quantity
Of
12
Of 4
Quantity
Of 4
Screw Nut M5
13
Quantity
Of
12
Small-Machine-screw M4
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Wood Screw∮3*22mm
11
Screw Nut M4
Assembly Tool Required
No.2 Phillips Screwdriver
Quantity
Of 12
Hinge
Sewing Table-White
Assembly Instruction
Step 1:
Tighten wood screws (11) through
hinges (12) into predrilled holes on
underside of large top panel and
leaf panel (A) and (B) as shown.
Step 2:
Insert wood dowel (1) into
predrilled hole on bottom edge of
divider (J) and fit into
corresponding hole on lower shelf
(D). Insert T-bolt (6) into hole on
divider (J) ensuring the slots for the
screwdriver are facing out and
visible. Insert large machine screw
(5) through predrilled hole on lower
shelf (D) and into the middle
thread in T-bolt (6).
Please note, if screw does not
tighten, adjust T-bolt using
screwdriver until the thread in the
T-bolt (6) and large machine screw
(5) align.
Slide upper shelf(C) into groove on
diver (J) as shown.
Step 3:
Insert wood dowels (1) into
corresponding holes on right side
panel (H).
Place assembled unit on right side
panel (H) making sure the wood
dowels are inserted into the
corresponding holes on assembled
unit.
Insert T-bolts (6) into the holes on
parts (C, D, J) and tighten large
machine screws (5) through holes
on right side panel (H) into T-bolts
(6).
Please note that if screws do not
tighten, rotate T-bolts (6) so that
threads of T-bolt are facing.
Step 4:
Insert wood dowels (1) into holes
on large shelf(E) and fit into
corresponding holes on back
panel(F). Insert T-bolt (6) into hole
on underside of large shelf (E) and
tighten large machine screw (5)
through hole on back panel (F) into
T-bolt (6).
Attach cam bolt (2) to large shelf
(E). Insert wood dowels (1) into
holes on large shelf (E) and fit into
corresponding holes on bottom
front stretcher(L).
Step 5:
Fit casters (7) and (8) on bottom
edge on side panel (H) and (I) by
using small machine screws (9)
and screw nuts (10).
Insert wood dowels (1) into holes
on the inside of side panel (H) and
(I). Attach large shelf (E), bottom
front stretcher (L), top stretcher (K)
and back panel (F) to side panel
(H) inserting wood dowels (1) into
corresponding holes.
Insert T-bolts (6) into the holes on
parts (E) and (F) and tighten large
machine screws (5) through holes
on right side panel (H) into T-bolts
(6).
Assemble left side panel(I) in same
manner as shown.
Insert Machine Screws (13)
through hinges (12) by using screw
nut (14) and tighten into holes on
leaf support (G) and outside of left
side panel (I).
Set the unit upright as shown.
Step 6:
Insert wood dowels (1) and
cam-bolts (2) into holes on
underside of parts (A) and (B). Fit
into corresponding holes on top
edges of parts (H, I, J, K). Insert
cam-locks (3) into corresponding
holes on parts (H, I, J, K) with slot
for screwdriver facing outward.
Rotate cam-locks (3) clockwise to
secure cam-bolts (2).
Push covers (4) into cam-locks (3)
as shown.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Parts Replacement Form
Style No Parts Letter Parts Description Quantity
Needed
Loading...