ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1 . Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING !
1 . Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2 . This product is for home use only and not intended for commercial establishment.
ASSEMBLY TIME 10 MINUTES
PARTS IDENTIFICATION
A 1PC
DRESSER
STEP 1
A
NOTE:
Philips head screw driver in the assembly process ; however, manufacturer does not provide the item
PAGE 2 OF 3
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitle for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of the
dresser using short screw provided, through the
smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of dresser. Attached to the wall
stud using the long screw provided,through the
smaller hole.
WALL
STEP 3
Place the dresser into position so both mounting brackets are vertically in line. Lace the end of the restraint
strap through the larger hole in each mounting bracket. Bring both ends together and slide the flat end
through the locking end and draw it through until all slack is removed. Confirm that the strap is securely
laced and locked.
WALL
PAGE 3 OF 3
16.52"
INNER SIZE OF DRAWER : 5.28" X 12.68" X 24.01"
58.31"
39.96"
25.83"
58.31"
7.09"
0.59"
36.97"
50.43"
10.61"
16.52"
Note: Dimension tolerance ±5%
Loading...