TABLE
COFFEE
ASSEMBLY INSTRUCTION
Page 1 of 4
ASSEMBLY INSTRUCTION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION: Z HARDWARE PACKAGE
B1: BASE
(A) Leg
B2: TABLE TOP
(B) Glass Top
4PCS
1PC
NO DESCRIPTION FIGURE Q’TY
1
2
3
4
Short Allen Bolt
1/4”x1/2”
Leveler
Glass Pad
Allen Wrench
8PCS
4PCS
4PCS
1PC
Page 2 of 4
Step 1.
Put all parts on a soft surface to prevent scratches then follow below illustrations step by step to
complete all assembly.
Do not fully tighten screws & bolts until the entire unit is completely assembled.
Attach leg (A) to leg (A) by using short allen bolt (1) as shown.
.
Page 3 of 4
ASSEMBLY INSTRUCTION
Step 2.
Attach levelers (2) to the bottom of legs.
Step 3.
Turn the unit upside down and put glass pads (3) onto the legs (A) as shown, then place glass top
(B) on the glass pads (3).
.
Page 4 of 4
Loading...